Keep track of the latest security vulnerabilities across your infrastructure stack.
In Apache Airflow before 3.3.0, the REST API task-instance detail and list endpoints returned a deferred task's trigger kwargs without masking. When a deferred operator passed a secret (for example a provider API key) into its trigger, any authenticated user with DAG-scoped task-instance read access for that DAG could read that secret in clear text while the task was deferred. Users should upgrade to apache-airflow 3.3.0 or later, which masks sensitive values in trigger kwargs returned by the API.
Before apache-airflow 3.3.0, a user authorized to read one Dag could disclose the source of other Dags co-located in the same source file. `GET /api/v2/dagSources/{dag_id}` — and the equivalent Dag-source view in the UI — returned the entire source file without redacting Dags the caller was not authorized to read, bypassing per-DAG read authorization. Deployments that co-locate multiple Dags in a single file and rely on per-DAG access control to limit source visibility are affected; single-Dag-per-file deployments are not. Upgrade to apache-airflow 3.3.0 or later.
The Config API in Apache Airflow surfaced per-key secrets-backend overrides (environment variables like `AIRFLOW__SECRETS__BACKEND_KWARG__SECRET_ID` and `AIRFLOW__WORKERS__SECRETS_BACKEND_KWARG__SECRET_ID`) as synthetic config options whose option names were not in `sensitive_config_values`, so the masker did not redact them. An authenticated UI/API user with Config read permission could retrieve plaintext secrets-backend credentials (Vault `role_id` / `secret_id`, etc.) from the Config API output. Affects deployments that configure secrets backends via per-key environment overrides. Users are advised to upgrade to `apache-airflow` 3.3.0 or later.
A bug in Apache Airflow's `/ui/dependencies` scheduling graph endpoint applied the caller's readable-Dag filter to the top-level serialized Dag key but still emitted referenced Dag IDs through the `dep.source` and `dep.target` fields of trigger / sensor dependency entries. An authenticated UI user with read permission on some Dags could enumerate the identifiers of other Dags they were not authorized to read by inspecting the dependency graph for trigger / sensor references. Affects deployments that rely on per-Dag read scoping to keep Dag identifiers private across teams. This is a residual gap in the fix for CVE-2026-28563, which filtered the top-level Dag key but did not propagate the filter into the trigger / sensor dep-source / dep-target fields. Users who already upgraded for CVE-2026-28563 should additionally upgrade to `apache-airflow` 3.3.0 or later to cover the residual trigger / sensor dependency leak.
The Bulk Variables API in Apache Airflow called the redactor without passing the variable's key, so the key-based `should_hide_value_for_key` check (which triggers on secret-suffixed key names like `*_password` / `*_token` / `*_secret`) could not fire for JSON-decodable variable values. An authenticated UI/API user with bulk Variable read permission could retrieve plaintext values from JSON variables whose key would otherwise trigger redaction. Affects deployments that store sensitive values in JSON-typed Airflow Variables under secret-suffixed key names. Users are advised to upgrade to `apache-airflow` 3.3.0 or later (the fix landed on `main` after 3.2.2; no 3.2.x backport).
Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Undertow Component. The camel-undertow HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false, whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application's internal structure, which an attacker can use to plan further attacks. In addition, for Rest DSL consumers the muteException option was not honoured at all: the RestUndertowHttpBinding was created with a hard-coded false, so the stack trace was returned even when muteException=true had been configured. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-undertow consumer (for example undertow: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.undertow.mute-exception=true property), so that processing errors no longer return the stack trace to the client; note that on affected releases this workaround does not cover Rest DSL consumers, whose binding ignores the option until the fix is applied.
Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Netty HTTP component. The camel-netty-http HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false because the backing field was an uninitialised primitive boolean (Java's default of false), whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain (via DefaultNettyHttpBinding) instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application's internal structure, which an attacker can use to plan further attacks. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-netty-http consumer (for example netty-http: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.netty-http.configuration.mute-exception=true property), so that processing errors no longer return the stack trace to the client.
Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Salesforce Component. The camel-salesforce producer resolves its operation parameters - the SOQL query, the SOSL search, the target SObject name and id, the Apex REST URL and method, and the Apex query parameters - from Exchange message headers, reading the header in preference to the value configured on the endpoint (AbstractSalesforceProcessor.getParameter() reads the header first and uses the endpoint configuration only as a fallback). The control-header constants in SalesforceEndpointConfig (for example SOBJECT_QUERY = sObjectQuery, SOBJECT_SEARCH = sObjectSearch, SOBJECT_NAME = sObjectName, SOBJECT_ID = sObjectId, APEX_URL = apexUrl, APEX_METHOD = apexMethod, and the apexQueryParam. prefix) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a salesforce: producer, any HTTP client could therefore set these headers and override what the route intended - supplying its own SOQL query or SOSL search to read data from any SObject the connected Salesforce user can access, overriding the target SObject name and id for CRUD operations, or redirecting an Apex REST call to a different endpoint and HTTP method (including destructive methods) with injected query parameters. All such operations run with the full permissions of the Salesforce connected (integration) user, which is typically broad. No credentials are required from the attacker when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Salesforce operation parameters via the raw header names must use the CamelSalesforce* names (for example CamelSalesforceSObjectQuery and CamelSalesforceApexUrl) instead of the old sObject* / apex* values; the endpoint-option spelling is unchanged. For deployments that cannot upgrade immediately, strip the Salesforce control headers from any untrusted ingress before the salesforce: producer (for example removeHeaders('sObject*') and removeHeaders('apex*') at the start of the route), and set the query, SObject and Apex parameters from a trusted source.
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel Kafka Component. The camel-kafka producer can override its configured target topic at runtime from the kafka.OVERRIDE_TOPIC Exchange header: KafkaProducer.evaluateTopic() returns the header value in preference to the topic configured on the endpoint. The control-header constants in KafkaConstants (for example OVERRIDE_TOPIC = kafka.OVERRIDE_TOPIC, OVERRIDE_TIMESTAMP = kafka.OVERRIDE_TIMESTAMP, PARTITION_KEY = kafka.PARTITION_KEY) used plain, non-Camel-prefixed values. camel-kafka's own KafkaHeaderFilterStrategy does filter the kafka.* namespace, but only on the Kafka-to-Exchange serialization boundary (reading Kafka record headers into the Exchange, and writing Exchange headers into a Kafka record); it does not apply to headers that arrive from an upstream consumer in a multi-component route. The upstream HTTP consumer uses HttpHeaderFilterStrategy, which blocks only the Camel / camel namespace, so a kafka.* header passes through unfiltered. As a result, in a route that bridges an HTTP consumer (for example platform-http) into a kafka: producer, any HTTP client could set the kafka.OVERRIDE_TOPIC header and cause the message to be published to an arbitrary Kafka topic instead of the configured one - redirecting it to a sensitive internal topic, or injecting attacker-crafted messages into a topic consumed by a critical downstream service. The related kafka.OVERRIDE_TIMESTAMP and kafka.PARTITION_KEY headers could likewise be injected to backdate messages or target specific partitions. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set or read Kafka headers via the raw header names must use the CamelKafka* names (for example CamelKafkaOverrideTopic and CamelKafkaTopic) instead of the old kafka.* values. For deployments that cannot upgrade immediately, strip the kafka.* headers from any untrusted ingress before the kafka: producer (for example removeHeaders('kafka.*') at the start of the route), and set the target topic from a trusted source.
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel IRC component. The camel-irc producer chooses the destination of an outgoing IRC message from the irc.sendTo Exchange header (the constant IrcConstants.IRC_SEND_TO, value irc.sendTo); when that header is present it overrides the channel list configured on the endpoint, and the message is sent only to the specified destination. This and the component's other control headers (irc.target, irc.messageType, irc.user.*, irc.num, irc.value) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into an irc: producer, any HTTP client could therefore set the irc.sendTo header and redirect a message that the route intended for a configured channel to an arbitrary IRC channel or user - exfiltrating the message content to an attacker-chosen nickname, leaking it into a public channel, or delivering messages that appear to come from the bot. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set IRC headers via the raw header names must use the CamelIrc* names (for example CamelIrcSendTo) instead of the old irc.* values. For deployments that cannot upgrade immediately, strip the irc.* headers from any untrusted ingress before the irc: producer (for example removeHeaders('irc.*') at the start of the route), and set the IRC destination from a trusted source.
Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel DAPR component. The camel-dapr Dapr Pub/Sub consumer (DaprPubSubConsumer) copied two fields from each inbound CloudEvent - its Pub/Sub component name and its topic - into the CamelDaprPubSubName and CamelDaprTopic Exchange headers. These two headers are producer-direction routing headers: when the route republishes through a Dapr producer, DaprConfigurationOptionsProxy reads them back and prefers them over the destination configured on the endpoint. As a result, in a route that consumes from one Dapr Pub/Sub topic and republishes to another (for example from('dapr-pubsub:p:t').to('dapr-pubsub:p:other')), an actor able to publish a message to the subscribed topic could set the CloudEvent's pub/sub-name and topic to values of their choosing and cause the re-published message to be delivered to an arbitrary Dapr Pub/Sub component and topic instead of the configured destination - redirecting or exfiltrating the message and bypassing the route's intended routing and any topic-level access controls in the underlying broker. Exploitation requires the ability to publish to the topic the route subscribes to; no other authentication or user interaction is needed. This issue affects Apache Camel: from 4.12.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, remove the CamelDaprPubSubName and CamelDaprTopic headers from the Exchange between the Dapr consumer and any Dapr producer in the route (for example removeHeaders('CamelDaprPubSubName', 'CamelDaprTopic')), and restrict who can publish to the subscribed Dapr Pub/Sub topic so that only trusted producers can send to it.
Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel JIRA component. The camel-jira producers read their operation parameters - the issue key, project key, transition id, summary, type, assignee, components, watchers, link type, work-log minutes and others - from Exchange message headers. The header constants defined in JiraConstants (for example ISSUE_KEY = IssueKey, ISSUE_PROJECT_KEY = ProjectKey, ISSUE_TRANSITION_ID = IssueTransitionId, LINK_TYPE = linkType) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a jira: producer, any HTTP client could therefore supply these headers and override the values the route intended, driving JIRA operations against the configured JIRA instance with the endpoint's configured service-account credentials - for example deleting or transitioning an arbitrary issue (via IssueKey / IssueTransitionId), creating an issue in a different project (via ProjectKey), modifying issue fields, adding or removing watchers, or logging work. The operations are bounded by what the configured service account is permitted to do. No credentials are required from the attacker when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive JIRA operations via the raw header names must use the CamelJira* names (for example CamelJiraIssueKey) instead of the old values. For deployments that cannot upgrade immediately, strip the camel-jira control headers from any untrusted ingress before the jira: producer (for example removing the IssueKey, ProjectKey, IssueTransitionId and related headers at the start of the route), and set the required JIRA operation parameters from a trusted source.
Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel ElasticSearch Rest Client. The camel-elasticsearch-rest-client component reads several Exchange headers to control its behaviour - SEARCH_QUERY (an advanced query body), OPERATION (which Elasticsearch operation to run), INDEX_NAME, INDEX_SETTINGS and ID. The string values of these header constants, defined in ElasticSearchRestClientConstant, are plain unprefixed names ('SEARCH_QUERY', 'OPERATION', 'INDEX_NAME', 'INDEX_SETTINGS', 'ID') rather than the 'Camel'-prefixed names used by every other Camel component (for example CamelSqlQuery, CamelMongoDbCriteria, CamelCqlQuery). Camel's inbound HTTP header filter, HttpHeaderFilterStrategy, blocks only header names that begin with 'Camel' or 'camel'. Because the Elasticsearch header names do not carry that prefix, they pass through the inbound filter unchanged. When a Camel route exposes an HTTP entry point (for example platform-http) in front of an elasticsearch-rest-client producer, an untrusted HTTP client can set these headers directly on its request and override the query and operation that the route author configured: reading every document in the index (SEARCH_QUERY with a match_all query), deleting documents (OPERATION set to Delete together with ID), or exfiltrating selected fields. No credentials are required and the producer reads the headers unconditionally. This issue affects Apache Camel: from 4.3.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix renames the camel-elasticsearch-rest-client Exchange header constant string values (ID, SEARCH_QUERY, INDEX_SETTINGS, INDEX_NAME, OPERATION) to carry the Camel prefix (CamelElasticsearchId, CamelElasticsearchSearchQuery, CamelElasticsearchIndexSettings, CamelElasticsearchIndexName, CamelElasticsearchOperation) so that they are blocked by the inbound HttpHeaderFilterStrategy; the Java field names are unchanged. For deployments that cannot upgrade immediately, strip the affected headers from untrusted inbound messages before they reach the producer (for example removeHeader('SEARCH_QUERY'), removeHeader('OPERATION'), removeHeader('INDEX_NAME'), removeHeader('INDEX_SETTINGS') and removeHeader('ID') in front of the elasticsearch-rest-client endpoint), or apply a custom HeaderFilterStrategy that blocks these names.
Improper Restriction of XML External Entity Reference vulnerability in Apache Lucene.Net (Lucene.Net.Analysis.Common library). This issue affects Apache Lucene.Net.Analysis.Common: from 4.8.0-beta00005 before 4.8.0-beta00018. Users are recommended to upgrade to version 4.8.0-beta00018, which fixes the issue.
SQL misconfiguration in the Gravitino UI, in versions 1.0.0 and below, can allow a malicious user to read or truncate files. Users are recommended to upgrade to version 1.0.0, which fixes this issue.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Apache ActiveMQ, Apache ActiveMQ Web Console. The browse page in the web console renders a message Id directly without sanitization. This allows an authenticated producer to send a message with a JMS message ID that has been crafted to contain HTML/JavaScript such that when an administrator browses the queue in the Web Console, the payload executes in their browser. This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Web Console: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.
Discuss the latest advisories, swap patch-day notes with other infra teams, and get support — straight from the people who run VulniPulse.
Join the communityIf you want to support server/domain costs, please donate below — much love ❤️
Donate