Medium [CVE-2026-72134] reconfigure for PIO when DMA cannot be started
This medium-severity Red Hat Linux advisory covers CVE-2026-72134.
Aggregated and source-linked by VulniPulse. Data sources, validation and limitations.
VulniPulse record published Record updated
Android app · Google Play
Monitor future Red Hat Linux CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 34 official vendor sources and 160+ reviewed platform categories.
Summary
In the Linux kernel, the following vulnerability has been resolved: spi: imx: reconfigure for PIO when DMA cannot be started When spi_imx_can_dma() selects DMA, the ECSPI is configured for DMA: spi_imx_setupxfer() sets CTRL.SMC and clears dynamic_burst, and spi_imx_dma_transfer() programs the dynamic-burst BURST_LENGTH and the SDMA watermarks.
If the DMA descriptor cannot be prepared (dmaengine_prep_slave_single() returns NULL), the transfer is failed with SPI_TRANS_FAIL_NO_START and falls back to PIO.
The dynamic-burst DMA path uses its own bounce buffers instead of the SPI core's mapping, so xfer->{tx,rx}_sg_mapped are not set and the core's DMA->PIO retry is skipped; the driver falls back to PIO internally.
But none of the DMA-mode configuration is undone, so the PIO transfer runs with CTRL.SMC set, the wrong burst length and dynamic_burst cleared, and the transferred data is corrupted. This is easily hit on i.MX8MP boards that describe ECSPI DMA in the device tree but run SDMA on ROM firmware (no external sdma-imx7d.bin): every ECSPI DMA prepare fails.
An Infineon SLB9670 TPM on ECSPI1 then returns shifted TPM2_GetCapability data, is flagged "field failure mode", /dev/tpmrm0 is never created. Set controller->fallback before re-running spi_imx_setupxfer() so the ECSPI is reconfigured exactly like a normal PIO transfer.
Affected versions
No affected-version range was extracted from the source record. The vendor advisory is authoritative — check it before change work.
Official advisory · medium-confidence parse· fetched 24 days ago·verify at source
Fixed versions
No fixed release is recorded yet. That does not prove no patch exists — confirm against the vendor advisory.
Official advisory · medium-confidence parse· fetched 24 days ago·verify at source
Mitigation
The source record does not include mitigation steps. That is not a statement that no fix exists — read the vendor advisory below for the authoritative guidance.
Official advisory · medium-confidence parse· fetched 24 days ago·verify at source
Discussion(0)
No comments yet. Share field notes, upgrade gotchas, or questions — verify against the vendor advisory before acting on community advice.
Sign in to join the discussion.