Complete feed
No mitigation yet
No fix, workaround or mitigation extracted yet
Android app · Google Play
Take your CVE monitoring with you.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 32 official vendor sources and 160+ reviewed platform categories.
Medium [CVE-2026-53135] Fix NULL deref and buffer over-read in SDP debugfs
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL deref and buffer over-read in SDP debugfs [Why & How] dp_sdp_message_debugfs_write() dereferences connector->base.state->crtc without checking for NULL. A connector can be connected but not bound to any CRTC (e.g. after hot-plug before the next atomic commit), causing a kernel crash when writing to the sdp_message debugfs node. The function also ignores the user-provided size argument and always passes 36 bytes to copy_from_user(), reading past the user buffer when size base.state or state->crtc is NULL - Clamping write_size to min(size, sizeof(data)) (cherry picked from commit 6ab4c36a522842ff70474a1c0af2e40e50fc8300) The system may experience a kernel crash due to a null pointer dereference, leading to a denial of service (DoS). Additionally, the flaw could result in a buffer over-read, potentially exposing sensitive information or leading to further instability. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-476. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-53263] fix off-by-one in multicast context address compression
In the Linux kernel, the following vulnerability has been resolved: 6lowpan: fix off-by-one in multicast context address compression The second memcpy in lowpan_iphc_mcast_ctx_addr_compress() uses &data[1] as destination and &ipaddr->s6_addr[11] as source, but both should be offset by one: &data[2] and &ipaddr->s6_addr[12] respectively. This off-by-one has two consequences: 1. data[1] is overwritten with s6_addr[11], corrupting the RIID field in the compressed multicast address 2. data[5] is never written, so uninitialized kernel stack memory is transmitted over the network via lowpan_push_hc_data(), leaking kernel stack contents The correct inline data layout must match what the decompression function lowpan_uncompress_multicast_ctx_daddr() expects: data[0..1] = s6_addr[1..2] (flags/scope + RIID) data[2..5] = s6_addr[12..15] (group ID) Also zero-initialize the data array as a defensive measure against similar bugs in the future. This vulnerability results in information disclosure, potentially allowing an attacker to access sensitive kernel data. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-193. Affected Red Hat products: Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-53177] Fix NULL pointer dereference
In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix NULL pointer dereference PCIe errors detected by a Root Port or Downstream Port cause error recovery services to run on all subordinate devices regardless of administrative state. The.error_detected() callback, bnxt_io_error_detected(), disables and synchronizes IRQs via bnxt_disable_int_sync(), which calls bnxt_cp_num_to_irq_num() to map completion rings to IRQs using bp->bnapi. Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe error recovery on a closed NIC can dereference a NULL pointer. Check if bp->bnapi is NULL before disabling and synchronizing IRQs. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-53258] fix leak if split 6 GHz scanning fails
In the Linux kernel, the following vulnerability has been resolved: wifi: fix leak if split 6 GHz scanning fails rdev->int_scan_req is leaked if cfg80211_scan() fails. Note that it's supposed to be released at ___cfg80211_scan_done() but this doesn't happen as rdev->scan_req is NULL at that point, too, leading to the early return from the freeing function. unreferenced object 0xffff8881161d0800 (size 512): comm "wpa_supplicant", pid 379, jiffies 4294749765 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00................ 00 00 00 00 00 00 00 00 f0 81 13 16 81 88 ff ff................ backtrace (crc c867fdb6): kmemleak_alloc+0x89/0x90 __kmalloc_noprof+0x2fd/0x410 cfg80211_scan+0x133/0x730 nl80211_trigger_scan+0xc69/0x1cc0 genl_family_rcv_msg_doit+0x204/0x2f0 genl_rcv_msg+0x431/0x6b0 netlink_rcv_skb+0x143/0x3f0 genl_rcv+0x27/0x40 netlink_unicast+0x4f6/0x820 netlink_sendmsg+0x797/0xce0 __sock_sendmsg+0xc4/0x160 ____sys_sendmsg+0x5e4/0x890 ___sys_sendmsg+0xf8/0x180 __sys_sendmsg+0x136/0x1e0 __x64_sys_sendmsg+0x76/0xc0 x64_sys_call+0x13f0/0x17d0 Found by Linux Verification Center (linuxtesting.org). Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9.
Medium [CVE-2026-53151] Fix the ACK parser to extract the SACK table for parsing
In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix the ACK parser to extract the SACK table for parsing Fix modification of the received skbuff in rxrpc_input_soft_acks() and a potential incorrect access of the buffer in a fragmented UDP packet (the packet would probably have to be deliberately pre-generated as fragmented) when AF_RXRPC tries to extract the contents of the SACK table by copying out the contents of the SACK table into a buffer before attempting to parse AF_RXRPC assumes that it can just call skb_condense() and then validly access the SACK table from skb->data and that it will be a flat buffer - but skb_condense() can silently fail to do anything under some circumstances. Note that whilst rxrpc_input_soft_acks() should be able to parse extended ACKs, the rest of AF_RXRPC doesn't currently support that. Further, there's then no need to call skb_condense() in rxrpc_input_ack(), so don't. An attacker could potentially craft a fragmented UDP packet to trigger an incorrect buffer access within the kernel, which may lead to system instability or other undefined behavior. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-125. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.
Medium [CVE-2026-53199] use kmap_local_page in netvsc_copy_to_send_buf
In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: use kmap_local_page in netvsc_copy_to_send_buf netvsc_copy_to_send_buf() copies page buffer entries into the VMBus send buffer using phys_to_virt() on the entry PFN. Entries for the RNDIS header and the skb linear data come from kmalloc'd memory and are always in the kernel direct map, but entries for skb fragments reference page cache or user pages, which on 32-bit x86 with CONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a page phys_to_virt() returns an address outside the direct map and the subsequent memcpy() faults on the transmit softirq path, which is fatal. Map the pages with kmap_local_page() instead, handling two properties of the page buffer entries: - pb[i].pfn is a Hyper-V PFN at HV_HYP_PAGE_SIZE (4K) granularity, not a native PFN. Reconstruct the physical address first and derive the native page from it, so the mapping stays correct where PAGE_SIZE > HV_HYP_PAGE_SIZE (e.g. arm64 with 64K pages). - Since commit 41a6328b2c55 ("hv_netvsc: Preserve contiguous PFN grouping in the page buffer array"), an entry describes a full physically contiguous fragment and pb[i].len can exceed PAGE_SIZE, while kmap_local_page() maps a single page. Copy page by page, splitting at native page boundaries.
Medium [CVE-2026-53274] fix sleep-inside-lock in __smc_setsockopt causing local DoS
In the Linux kernel, the following vulnerability has been resolved: net/smc: fix sleep-inside-lock in __smc_setsockopt() causing local DoS A logic flaw in __smc_setsockopt() allows a local unprivileged user to cause a Denial of Service (DoS) by holding the socket lock indefinitely. The function __smc_setsockopt() calls copy_from_sockptr() while holding lock_sock(sk). By passing a userfaultfd-monitored memory page (or FUSE-backed memory on systems where unprivileged userfaultfd is disabled) as the optval, an attacker can halt execution during the copy operation, keeping the lock held. Combined with asynchronous tear-down operations like shutdown(), this exhausts the kernel wq (kworkers) and triggers the hung task watchdog. [ 240.123456] INFO: task kworker/u8:2 blocked for more than 120 seconds. [ 240.123489] Call Trace: [ 240.123501] smc_shutdown+... [ 240.123512] lock_sock_nested+... This patch moves the user-space copy outside the lock_sock() critical section to prevent the issue. By providing a specially crafted memory page, an attacker can cause the system to halt execution, leading to a Denial of Service (DoS) by exhausting kernel resources and triggering a hung task watchdog. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-821.
Medium [CVE-2026-53231] don't try to setup PHY-driven SFP cages when using genphy
In the Linux kernel, the following vulnerability has been resolved: net: phy: don't try to setup PHY-driven SFP cages when using genphy We don't have support for PHY-driver SFP cages with the genphy code. On top of that, it was found by sashiko that running sfp_bus_add_upstream() for genphy deadlocks, as for genphy the PHY probing runs under RTNL, which isn't the case for non-genphy drivers. This problem was reproduced, and does lead to a deadlock on RTNL. Before the blamed commit, the phy_sfp_probe() call was made by individual PHY drivers, so there was no way to get to the SFP probing path when using genphy. Let's therefore only run phy_sfp_probe when not using genphy. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Affected Red Hat products: Red Hat Enterprise Linux 6. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
Medium [CVE-2026-53144] fix NULL dereference in get_queue_ids
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix NULL dereference in get_queue_ids() When usr_queue_id_array is NULL and num_queues is non-zero, get_queue_ids() returns NULL. The callers check only IS_ERR() on the return value; since IS_ERR(NULL) == false the check passes, and suspend_queues() calls q_array_invalidate() which immediately dereferences NULL while iterating num_queues times. Userspace can trigger this via kfd_ioctl_set_debug_trap() by supplying num_queues > 0 with a zero queue_array_ptr, causing a kernel panic. A NULL usr_queue_id_array with num_queues == 0 is a legitimate no-op (q_array_invalidate never executes, and resume_queues already guards all queue_ids dereferences behind a NULL check). Return ERR_PTR(-EINVAL) only when num_queues is non-zero and the pointer is absent; both callers already propagate IS_ERR() returns correctly to userspace. (cherry picked from commit f165a82cdf503884bb1797771c61b2fcc72113d4) Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-53225] fix uninit-value in __sctp_rcv_asconf_lookup
In the Linux kernel, the following vulnerability has been resolved: sctp: fix uninit-value in __sctp_rcv_asconf_lookup() __sctp_rcv_asconf_lookup() in net/sctp/input.c only checks that the ASCONF chunk can hold the ADDIP header and a parameter header, then calls af->from_addr_param(), which reads the full address (16 bytes for IPv6) trusting the parameter's declared length. An unauthenticated peer can send a truncated trailing ASCONF chunk that declares an IPv6 address parameter but stops after the 4-byte parameter header; reached from the no-association lookup path, from_addr_param() then reads uninitialized bytes past the parameter. The sibling __sctp_rcv_init_lookup() bounds parameters with sctp_walk_params(); this path open-codes the fetch and omits the bound. Verify the whole address parameter lies within the chunk before from_addr_param() reads it, the same class of fix as commit 51e5ad549c43 ("net: sctp: fix KMSAN uninit-value in sctp_inq_pop"). A flaw was found in the Linux kernel's Stream Control Transmission Protocol (SCTP) implementation. An unauthenticated remote attacker can exploit this vulnerability by sending a specially crafted, truncated ASCONF (Address Configuration) chunk. This can cause the system to read up to 16 bytes of uninitialized memory, potentially leading to information disclosure or memory corruption.
Medium [CVE-2026-53141] Fix global performance monitor reference counting
In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix global performance monitor reference counting In the SET_GLOBAL ioctl, v3d_perfmon_find() bumps the reference count on the perfmon it returns, but v3d_perfmon_set_global_ioctl() and v3d_perfmon_delete() fail to release that reference on several paths: 1. v3d_perfmon_set_global_ioctl() leaks the reference on its error paths. 2. CLEAR_GLOBAL leaks both the find reference and the reference previously stashed in v3d->global_perfmon by the SET_GLOBAL ioctl that configured it. 3. Release each of these references explicitly. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Medium [CVE-2026-53272] fix use-after-free on sbi->sync_decompress
In the Linux kernel, the following vulnerability has been resolved: erofs: fix use-after-free on sbi->sync_decompress z_erofs_decompress_kickoff() can race with filesystem unmount, causing a use-after-free on sbi->sync_decompress. When I/O completes, z_erofs_endio() calls z_erofs_decompress_kickoff() to queue z_erofs_decompressqueue_work() asynchronously. Then, after all folios are unlocked, unmount workflow can proceed and sbi will be freed before accessing to sbi->sync_decompress. Thread (unmount) I/O completion kworker queue_work z_erofs_decompressqueue_work (all folios are unlocked) cleanup_mnt.. erofs_kill_sb erofs_sb_free kfree(sbi) access sbi->sync_decompress // UAF!! Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
Medium [CVE-2026-53261] Release nested relation on devlink free
In the Linux kernel, the following vulnerability has been resolved: devlink: Release nested relation on devlink free devlink relation state is normally released from devl_unregister(), which calls devlink_rel_put(). This misses devlink instances that get a nested relation before registration and then fail probe before devl_register() is reached. That flow can happen for SFs. The child devlink gets linked to its parent before registration, then a later probe error calls devlink_free() directly. Since the instance was never registered, devl_unregister() is not called and devlink->rel is leaked. Release any pending relation from devlink_free() as well. The registered path is unchanged because devl_unregister() already clears devlink->rel before devlink_free() runs. This issue occurs when a devlink instance acquires a nested relation but fails to register, leading to a resource leak. This can result in system instability or a denial of service (DoS) over time due to resource exhaustion. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Advisory [CVE-2026-53159] fix DMA address corruption due to find_vma misuse
In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix DMA address corruption due to find_vma misuse fastrpc_get_args() uses find_vma() to look up the VMA for a user-provided pointer and compute a DMA address offset. When the address falls in a gap before the returned VMA, (ptr & PAGE_MASK) - vma->vm_start underflows, corrupting the DMA address sent to the DSP. Replace find_vma() with vma_lookup(), which returns NULL when the address is not contained within any VMA. The `fastrpc_get_args()` function incorrectly calculates a Direct Memory Access (DMA) address offset for user-provided pointers. This can lead to an underflow, corrupting the DMA address sent to the Digital Signal Processor (DSP). This corruption could result in system instability or other undefined behavior. Red Hat severity: not rated. Weakness: CWE-191. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Advisory [CVE-2026-53271] fix NULL-deref of opinfo->conn in oplock/lease break notifiers
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix NULL-deref of opinfo->conn in oplock/lease break notifiers smb2_oplock_break_noti() and smb2_lease_break_noti() read opinfo->conn into a local with neither READ_ONCE() nor a NULL check. Both run from oplock_break() after opinfo_get_list() has dropped ci->m_lock, so a concurrent SMB2 LOGOFF (session_fd_check()) can set op->conn = NULL under ci->m_lock within that window. ksmbd_conn_r_count_inc(conn) then writes through NULL at offset 0xc4 -- a remotely triggerable oops. Guard both reads the way compare_guid_key() already does: read opinfo->conn with READ_ONCE() and return early if it is NULL, before allocating the work struct so nothing leaks. A NULL conn means the client is gone and the break is moot, so return 0; oplock_break() treats that as success and runs the normal teardown. This occurs because `opinfo->conn` is read without proper checks, allowing a concurrent Server Message Block (SMB2) LOGOFF to set `op->conn` to NULL. Successful exploitation leads to a kernel oops, resulting in a Denial of Service (DoS). Red Hat severity: not rated. Weakness: CWE-476. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Advisory [CVE-2026-53139] Skip CSD when it has zeroed workgroups
In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Skip CSD when it has zeroed workgroups A compute shader dispatch encodes its workgroup counts in the CFG0..CFG2 registers. Kicking off a dispatch with a zero count in any of the three dimensions is invalid. First, the hardware will process 0 as 65536, while the user-space driver exposes a maximum of 65535. Over that, a submission with a zeroed workgroup dimension should be a no-op. These zeroed counts can reach the dispatch path through an indirect CSD job, whose workgroup counts are only known once the indirect buffer is read and may legitimately be zero, but such scenario should only result in a no-op. Overwrite the indirect CSD job workgroup counts with the indirect BO ones, even if they are zeroed, and don't submit the job to the hardware when any of the workgroup counts is zero, so the job completes immediately instead of running the shader. A flaw was found in the Linux kernel's graphics driver for Broadcom V3D (VideoCore V) GPUs. This vulnerability occurs when a compute shader dispatch (CSD) is initiated with zero workgroup counts, which the hardware could misinterpret as a very large number. This misinterpretation could lead to unexpected system behavior or a denial of service (DoS), where the system becomes unresponsive or crashes. Red Hat severity: not rated. Weakness: CWE-1284.
Advisory [CVE-2026-53198] fix use-after-free of a deferred file_lock on double SMB2_CANCEL
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL A deferred byte-range lock (an SMB2_LOCK that blocks) registers an async work on conn->async_requests via setup_async_work(), with cancel_fn = smb2_remove_blocked_lock and cancel_argv[0] pointing at the struct file_lock. When the request is cancelled, the worker frees the file_lock with locks_free_lock() and takes the cancelled early-exit, which "goto out"s and never reaches release_async_work() -- the only site that unlinks the work from conn->async_requests and clears cancel_fn/cancel_argv.
Advisory [CVE-2026-53161] fix use-after-free of fastrpc_user in workqueue context
In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix use-after-free of fastrpc_user in workqueue context There is a race between fastrpc_device_release() and the workqueue that processes DSP responses. When the user closes the file descriptor, fastrpc_device_release() frees the fastrpc_user structure. Concurrently, an in-flight DSP invocation can complete and fastrpc_rpmsg_callback() schedules context cleanup via schedule_work(&ctx->put_work). If the workqueue runs fastrpc_context_free() in parallel with or after fastrpc_device_release() has freed the user structure, it dereferences the freed fastrpc_user. Depending on the state of the context at the time of the race, any one of the following accesses can be hit: 1. fastrpc_buf_free() calls fastrpc_ipa_to_dma_addr(buf->fl->cctx,...) to strip the SID bits from the stored IOVA before passing the physical address to dma_free_coherent(). 2. fastrpc_free_map() reads map->fl->cctx->vmperms[0].vmid to reconstruct the source permission bitmask needed for the qcom_scm_assign_mem() call that returns memory from the DSP VM back to HLOS. 3. fastrpc_free_map() acquires map->fl->lock to safely remove the map node from the fl->maps list.
Advisory [CVE-2026-53165] avoid potential null folio->mapping deref during error reporting
In the Linux kernel, the following vulnerability has been resolved: iomap: avoid potential null folio->mapping deref during error reporting When a buffered read fails, iomap_finish_folio_read() reports the error with fserror_report_io(folio->mapping->host,...). This is called after ifs->read_bytes_pending has been decremented by the bytes attempted to be read. For a folio split across multiple read completions, the folio is only guaranteed to stay locked while read_bytes_pending > 0. Once iomap_finish_folio_read() decrements read_bytes_pending, another in-flight read can complete and end the read on the folio, which unlocks it. This allows truncate logic to run and detach the folio (set folio->mapping to NULL). As reported by Sam Sun, this is the race that can occur: CPU0: failed completion CPU1: final completion CPU2: truncate ----------------------- ---------------------- -------------- read_bytes_pending -= len finished = false /* preempted before fserror_report_io() */ read_bytes_pending -= len finished = true folio_end_read() truncate clears folio->mapping fserror_report_io( folio->mapping->host,...) ^ NULL deref Fix this by reporting the error first before decrementing ifs->read_bytes_pending. A race condition can occur during buffered read error reporting, specifically in the `iomap_finish_folio_read()` function.
Advisory [CVE-2026-53173] fix OOB write in ethosu_gem_cmdstream_copy_and_validate
In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix OOB write in ethosu_gem_cmdstream_copy_and_validate() The command stream parsing loop increments the index variable a second time when a 64-bit command word is encountered (bit 14 set), but does not re-check the loop bound before writing the second word: for (i = 0; i < size / 4; i++) { bocmds[i] = cmds[0]; if (cmd & 0x4000) { i++; bocmds[i] = cmds[1]; /* unchecked */ } } The buffer bocmds is backed by a DMA allocation of exactly size bytes from drm_gem_dma_create(ddev, size), giving valid indices [0, size/4-1]. When i == size/4 - 1 on entry to an iteration and bit 14 of cmds[0] is set, bocmds[size/4-1] is written in bounds, i is then incremented to size/4, and bocmds[size/4] writes four bytes past the end of the allocation. Userspace controls both the buffer contents and the size argument via the ioctl, making this a userspace-triggerable heap out-of-bounds write. Fix by checking the incremented index against the buffer bound before the second write and returning -EINVAL if the buffer is too small to contain the extended command. A local user can exploit this vulnerability by providing a specially crafted command stream, which causes an out-of-bounds write in memory.