Complete feed
Recently updated
Advisories the vendor has revised
Android app · Google Play
Take your CVE monitoring with you.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 32 official vendor sources and 160+ reviewed platform categories.
Medium [CVE-2026-64500] Initialize completion before requesting IRQ
Initialize completion before requesting IRQ. Red Hat rates this moderate.
Medium [CVE-2026-64353] Keep dynamic inner array lookups nullable
Keep dynamic inner array lookups nullable. Red Hat rates this moderate (CVSS 5.5). Weakness: CWE-787.
Medium [CVE-2026-64339] bound bulk IN response length to the received transfer
bound bulk IN response length to the received transfer. Red Hat rates this moderate (CVSS 5.5). Weakness: CWE-125.
Low [CVE-2026-66011] ImageMagick before 7.1.2-27 Memory Leak via Invalid CLI Options
ImageMagick before 7.1.2-27 Memory Leak via Invalid CLI Options. Red Hat rates this low (CVSS 3.3). Weakness: CWE-772.
Low [CVE-2026-64317] bound Rock Ridge symlink components to the SL record
bound Rock Ridge symlink components to the SL record. Red Hat rates this low (CVSS 3.9). Weakness: CWE-125.
Advisory [CVE-2026-64269] Bound RDMA-Write length to chunk size in rdma_write_sg
In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg When the server answers an RTRS READ, rdma_write_sg() builds the source scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the peer. Its length is taken directly from the wire descriptor: plist->length = le32_to_cpu(id->rd_msg->desc[0].len); rd_msg points into the chunk buffer that the remote peer filled via RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() -> process_read()), so desc[0].len is attacker-controlled and, before this change, was only rejected when zero. The source address is the fixed chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs layer does not constrain the transfer length to max_chunk_size. msg_id and off are bounded against queue_depth and max_chunk_size in rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not checked against the chunk size. A peer that advertises desc[0].len larger than max_chunk_size can make the posted RDMA write read past the chunk's mapped region.
Advisory [CVE-2026-64285] Pin source page for write when adding CPUID data for SNP guest
In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Pin source page for write when adding CPUID data for SNP guest When populating a guest_memfd instance with the initial CPUID data for an SNP guest, acquire a writable pin on the source page as KVM will write back the "correct" CPUID information if the userspace provided data is rejected by trusted firmware. Because KVM writes to the source page using a kernel mapping, pinning for read could result in KVM clobbering read-only memory. Note, well-behaved VMMs are unlikely to be affected, as CPUID information is almost always dynamically generated by userspace, i.e. it's unlikely for the CPUID information to be backed by a read-only mapping. [sean: rewrite shortlog and changelog, tag for stable@] A flaw was found in the Linux kernel's Kernel-based Virtual Machine (KVM) component, specifically within the Secure Nested Paging (SNP) guest functionality. When KVM populates a guest's CPUID (Central Processor Unit Identifier) data, it may attempt to write to a source memory page that is intended to be read-only. This incorrect memory pinning could lead to memory corruption, potentially allowing an attacker to overwrite sensitive data within the kernel. Red Hat severity: not rated. Weakness: CWE-787.
Advisory [CVE-2026-64314] chacha20poly1305 - validate poly1305 template argument
In the Linux kernel, the following vulnerability has been resolved: crypto: chacha20poly1305 - validate poly1305 template argument chachapoly_create() still accepts the compatibility poly1305 parameter in the template name, but it assumes the second template argument is always present and immediately passes it to strcmp(). When the argument is missing, crypto_attr_alg_name() returns an error pointer. Check for that before comparing the name so malformed template instantiations fail with an error instead of dereferencing the error pointer in strcmp(). This matches the surrounding Crypto API template pattern where crypto_attr_alg_name() results are validated before string-specific use. A flaw was found in the Linux kernel's `chacha20poly1305` cryptographic module. This vulnerability occurs because the `chachapoly_create()` function does not properly validate a `poly1305` template argument. This can result in a system crash, causing a Denial of Service (DoS) for affected systems. Red Hat severity: not rated. Weakness: CWE-476. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Advisory [CVE-2026-64431] avoid calling post_write_mst_fixup for invalid index_block
In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid calling post_write_mst_fixup() for invalid index_block ntfs_icx_ib_sync_write() calls post_write_mst_fixup() when ntfs_ib_write() returns an error, intending to restore the buffer after a failed write. However, ntfs_ib_write() returns an error immediately if pre_write_mst_fixup() validation fails. The caller, ntfs_icx_ib_sync_write(), interprets any error as a write failure requiring rollback. It does not differentiate between I/O errors and validation failures, and calls post_write_mst_fixup() anyway. Since post_write_mst_fixup() assumes that the index_block contents is correct, it doesn't perform the boundary checks, which results in out-of-bounds memory access.
Advisory [CVE-2026-64349] fix dwc3_readl and dwc3_writel calls in dwc3_ulpi_setup
In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: fix dwc3_readl() and dwc3_writel() calls in dwc3_ulpi_setup() The dwc3_ulpi_setup() calls the register read and write calls with dwc3->regs when both these calls take the dwc3 structure directly. Chnage these two calls to fix the following sparse warning, and possibly a nasty bug in the dwc3_ulpi_setup() code: drivers/usb/dwc3/core.c:796:45: warning: incorrect type in argument 1 (different address spaces) drivers/usb/dwc3/core.c:796:45: expected struct dwc3 *dwc drivers/usb/dwc3/core.c:796:45: got void [noderef] __iomem *regs drivers/usb/dwc3/core.c:798:40: warning: incorrect type in argument 1 (different address spaces) drivers/usb/dwc3/core.c:798:40: expected struct dwc3 *dwc drivers/usb/dwc3/core.c:798:40: got void [noderef] __iomem *regs Incorrect type handling in the `dwc3_readl()` and `dwc3_writel()` functions within `dwc3_ulpi_setup()` can lead to memory corruption. This vulnerability may allow an attacker to cause system instability or potentially execute arbitrary code, depending on the specific memory corruption scenario. Red Hat severity: not rated. Weakness: CWE-843. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat Hardened Images as not affected.
Advisory [CVE-2026-64437] fix use-after-free of a deferred file_lock on SMB2_CLOSE then SMB2_CANCEL
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of a deferred file_lock on SMB2_CLOSE then SMB2_CANCEL Commit f580d27e8928 ("ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL") made smb2_cancel() skip a work whose state is KSMBD_WORK_CANCELLED, so its cancel_fn cannot be fired a second time. But KSMBD_WORK has three states (ACTIVE, CANCELLED, CLOSED), and the same freeing producer path is reached for CLOSED too: SMB2_CLOSE on the locking handle -> set_close_state_blocked_works() sets the deferred work's state to KSMBD_WORK_CLOSED and wakes the smb2_lock() worker. The worker takes the non-ACTIVE early-exit, locks_free_lock()s the file_lock and, because the state is not KSMBD_WORK_CANCELLED, takes the STATUS_RANGE_NOT_LOCKED branch with "goto out2" -- which, like the cancelled branch, skips release_async_work(). The work stays on conn->async_requests with a live cancel_fn = smb2_remove_blocked_lock pointing at the freed file_lock.
Advisory [CVE-2026-64509] fix GenDisk cleanup paths
In the Linux kernel, the following vulnerability has been resolved: rust: block: fix GenDisk cleanup paths GenDiskBuilder::build() still has fallible work after __blk_mq_alloc_disk(), but its error path only recovers the foreign queue data. That leaks the temporary gendisk and request_queue until later teardown. If the caller moved the last Arc> into build(), the leaked queue can retain blk-mq state after the tag set is dropped. Fix the pre-registration failure path by dropping the temporary gendisk reference with put_disk() before recovering queue_data, so disk_release() can tear down the owned queue. Also pair GenDisk::drop() with put_disk() after del_gendisk(). Once a Rust GenDisk has been added with device_add_disk(), del_gendisk() only unregisters it; the final gendisk reference still has to be dropped to complete the release path. This vulnerability occurs in the `GenDisk` cleanup paths, where temporary disk and request queue resources may not be properly released during error handling or after unregistration. This can lead to a resource leak, potentially causing system instability or a denial of service (DoS) due to resource exhaustion. Red Hat severity: not rated. Weakness: CWE-772. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Advisory [CVE-2026-64442] fix OOB reads in IE loops in issue_assocreq and join_cmd_hdl
In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in IE loops in issue_assocreq() and join_cmd_hdl() Two IE parsing loops are missing the header bounds checks before they dereference pIE->length: - issue_assocreq() walks pmlmeinfo->network.ies to build the association request. If the stored IE data ends with only an element_id byte and no length byte, pIE->length is read one byte past the end of the buffer. - join_cmd_hdl() walks pnetwork->ies during station join and has the same problem under the same conditions. Both buffers are filled from AP beacon and probe-response frames, so a malicious AP that sends a truncated final IE can trigger the issue. Apply the two-guard pattern established in update_beacon_info(): 1. Break if fewer than sizeof(*pIE) bytes remain. 2. Insufficient boundary checks in the information element (IE) parsing loops within the `issue_assocreq()` and `join_cmd_hdl()` functions allow a remote attacker to cause an out-of-bounds read. By sending specially crafted, truncated IE data from a malicious Wi-Fi Access Point, an attacker could trigger a system crash, leading to a denial of service. Red Hat severity: not rated. Weakness: CWE-125.
Advisory [CVE-2026-64393] run set info with opener credentials
In the Linux kernel, the following vulnerability has been resolved: ksmbd: run set info with opener credentials SMB2 SET_INFO handlers call path-based VFS helpers after checking the access mask granted to the SMB handle. Those helpers perform their owner, inode permission and LSM checks using the current ksmbd worker credentials. Run the complete SET_INFO dispatch with the credentials captured when the handle was opened. This also removes the separate security information credential setup and keeps all SET_INFO classes under one credential scope. Direct override_creds() is used because it can nest with the request credential overrides already used by rename and link helpers. This vulnerability allows a local attacker to escalate privileges by manipulating Server Message Block (SMB2) SET_INFO operations. The system incorrectly uses the ksmbd worker's credentials instead of the original user's credentials when performing file system checks, potentially bypassing security restrictions and enabling unauthorized actions. Red Hat severity: not rated. Weakness: CWE-270. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat Hardened Images as not affected.
Advisory [CVE-2026-64350] fix stream context array leak in cdnsp_alloc_stream_info
In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info() cdnsp_alloc_stream_info() allocates stream_info->stream_ctx_array with cdnsp_alloc_stream_ctx(). If a later stream ring allocation or stream mapping update fails, the error path frees the allocated stream rings and stream_rings array, but leaves stream_ctx_array allocated. Free the stream context array before falling through to the stream_rings cleanup path. The `cdnsp_alloc_stream_info()` function allocates a stream context array but fails to free it if subsequent allocations or updates fail. This memory leak could lead to a denial of service due to resource exhaustion. Red Hat severity: not rated. Weakness: CWE-772. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Advisory [CVE-2026-64398] add a permission check for FSCTL_SET_ZERO_DATA
In the Linux kernel, the following vulnerability has been resolved: ksmbd: add a permission check for FSCTL_SET_ZERO_DATA FSCTL_SET_ZERO_DATA in smb2_ioctl() destroys file data via ksmbd_vfs_zero_data() -> vfs_fallocate(PUNCH_HOLE/ZERO_RANGE) after checking only the share-level KSMBD_TREE_CONN_FLAG_WRITABLE, with no per-handle access check. A handle opened with only FILE_WRITE_ATTRIBUTES still yields an FMODE_WRITE filp (FILE_WRITE_ATTRIBUTES is part of FILE_WRITE_DESIRE_ACCESS_LE, so smb2_create_open_flags() opens it O_WRONLY), so the vfs_fallocate FMODE_WRITE check does not stop it; only the missing fp->daccess gate would. Reproduced on mainline 7.1-rc7 with KASAN by an authenticated SMB client: a FILE_WRITE_ATTRIBUTES-only handle zeroed 4096 bytes of file data it had no FILE_WRITE_DATA right to (6/6; a FILE_READ_DATA-only handle was correctly denied). This is the unfixed sibling of commit cc57232cae23 ("ksmbd: fix FSCTL permission bypass by adding a permission check for FSCTL_SET_SPARSE"). Because SET_ZERO_DATA writes data (not an attribute), require FILE_WRITE_DATA. An authenticated Server Message Block (SMB) client with only FILE_WRITE_ATTRIBUTES permission can bypass a security check in the FSCTL_SET_ZERO_DATA function. This allows the client to zero out file data, leading to data destruction and a denial of service. Red Hat severity: not rated. Weakness: CWE-266.
Advisory [CVE-2026-64261] Avoid use-after-free in fuse_uring_async_stop_queues
In the Linux kernel, the following vulnerability has been resolved: fuse-uring: Avoid use-after-free in fuse_uring_async_stop_queues fuse_uring_async_stop_queues() might run when the last reference on ring->queue_refs was already dropped. In order to avoid an early destruction a reference on struct fuse_conn is now taken before starting fuse_uring_async_stop_queues() and that reference is only released when that delayed work queue terminates. This use-after-free vulnerability allows a local attacker to potentially achieve privilege escalation. The issue arises when the `fuse_uring_async_stop_queues()` function attempts to access memory that has already been freed, leading to unpredictable system behavior or unauthorized access. This flaw is mitigated by ensuring that a proper reference to the `fuse_conn` structure is maintained until the associated work queue has fully terminated. Red Hat severity: not rated. Weakness: CWE-825. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat Hardened Images as not affected.
Advisory [CVE-2026-64395] require source read access for duplicate extents
In the Linux kernel, the following vulnerability has been resolved: ksmbd: require source read access for duplicate extents FSCTL_DUPLICATE_EXTENTS_TO_FILE passes the source file directly to vfs_clone_file_range() or vfs_copy_file_range() without checking the SMB access mask granted to the source handle. A handle opened with attribute access can consequently be used to copy file contents into an attacker-readable destination. Require FILE_READ_DATA on the source handle before either VFS operation, matching other ksmbd data-copy paths. This vulnerability allows an attacker with attribute access to a file to bypass security checks when duplicating file extents. By using the FSCTL_DUPLICATE_EXTENTS_TO_FILE function, an attacker can copy the contents of a source file to a destination that they can read, leading to information disclosure. Red Hat severity: not rated. Weakness: CWE-358. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Advisory [CVE-2026-64331] fix NULL deref in vep_dequeue
In the Linux kernel, the following vulnerability has been resolved: usbip: vudc: fix NULL deref in vep_dequeue() vep_alloc_request() wasn't initializing vrequest->udc, so cancellations on the FunctionFS AIO path were arriving in vep_dequeue without a valid UDC reference. Since vrequest->udc is never actually properly used anywhere, we opt to remove it, and update vep_dequeue to obtain a reference to the udc with ep_to_vudc(), consistent with the other vep_ ops. AFAICT this bug has existed for ~10 years. I tested this fix in a QEMU aarch64 guest driving FunctionFS endpoints via AIO. Before the fix, running `usbip attach` from the host would cause the guest to oops with the following backtrace: Call trace: vep_dequeue+0x1c/0xe4 (P) usb_ep_dequeue+0x14/0x20 ffs_aio_cancel+0x24/0x34 __arm64_sys_io_cancel+0xb0/0x124 do_el0_svc+0x68/0x100 el0_svc+0x18/0x5c el0t_64_sync_handler+0x98/0xdc el0t_64_sync+0x154/0x158 A flaw was found in the Linux kernel's usbip virtual USB device controller (vudc). This vulnerability, a NULL pointer dereference, occurs when vep_alloc_request() fails to initialize a vrequest's udc field, causing asynchronous input/output (AIO) cancellations on the FunctionFS path to arrive without a valid UDC reference.
Advisory [CVE-2026-64459] restore RCU grace period in tcp_ao_destroy_sock
In the Linux kernel, the following vulnerability has been resolved: tcp: restore RCU grace period in tcp_ao_destroy_sock Commit 51e547e8c89c ("tcp: Free TCP-AO/TCP-MD5 info/keys without RCU") removed the call_rcu() callback from tcp_ao_destroy_sock(), arguing that "the destruction of info/keys is delayed until the socket destructor" and therefore "no one can discover it anymore". That argument does not hold for the call site in tcp_connect() (net/ipv4/tcp_output.c:4327-4332). At that point the socket is in TCP_SYN_SENT, has already been inserted into the inet ehash by inet_hash_connect() in tcp_v4_connect(), and is therefore very much discoverable: any softirq running tcp_v4_rcv() on another CPU can take the socket out of the ehash, walk into tcp_inbound_hash(), and load tp->ao_info via implicit RCU before bh_lock_sock_nested() is taken on the destroying CPU. The reader path then enters __tcp_ao_do_lookup() (net/ipv4/tcp_ao.c:208) which re-loads tp->ao_info via rcu_dereference_check(); the re-load can still observe the (about-to-be-freed) pointer because there is no synchronize_rcu() between rcu_assign_pointer(tp->ao_info, NULL) and tcp_ao_info_free() in tcp_ao_destroy_sock().