Complete feed
Recently updated
Advisories the vendor has revised
Android app · Google Play
Take your CVE monitoring with you.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 32 official vendor sources and 160+ reviewed platform categories.
High [CVE-2026-53374] zero-initialize GART table on allocation
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: zero-initialize GART table on allocation GART TLB is flushed after unmapping but not after mapping. Since amdgpu_bo_create_kernel() does not zero-initialize the buffer, when a single PTE is written the TLB may speculatively load other uninitialized entries from the same cacheline. Those garbage entries can appear valid, and a subsequent write to another PTE in the same cacheline may cause the GPU to use a stale garbage PTE from the TLB. Fix this by calling memset_io() to zero-initialize the GART table with gart_pte_flags immediately after allocation. Using AMDGPU_GEM_CREATE_VRAM_CLEARED, SDMA-based clear will not work since SDMA needs GART to be initialized to work. (cherry picked from commit d9af8263b82b6eaa60c5718e0c6631c5037e4b24) A flaw was found in the Linux kernel's AMD GPU (amdgpu) driver. When allocating a Graphics Address Remapping Table (GART), the memory was not properly initialized. This could allow a local attacker to potentially access uninitialized memory, leading to information disclosure or unexpected system behavior due to the GPU using stale data from its Translation Lookaside Buffer (TLB). Red Hat severity: Important — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-824.
High [CVE-2026-63809] use kvfree for replaced sysctl write buffer
In the Linux kernel, the following vulnerability has been resolved: bpf: use kvfree() for replaced sysctl write buffer proc_sys_call_handler() allocates its temporary sysctl buffer with kvzalloc() and passes it to __cgroup_bpf_run_filter_sysctl(). Since kvzalloc() may fall back to vmalloc() for large allocations, freeing that buffer with kfree() is wrong and can corrupt memory. Use kvfree() to safely handle both kmalloc and kvzalloc()/vmalloc allocations. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc5. Reproduced the bug based on v7.1-rc4 in a QEMU x86_64 guest booted with KASAN and CONFIG_FAILSLAB enabled. To exercise the replacement path, the test tree also included the accompanying fix for the stale ret == 1 check in __cgroup_bpf_run_filter_sysctl(). The reproducer confines failslab injections to the proc_sys_call_handler() range, uses stacktrace-depth=32, and injects fail-nth=1 while writing 8191 bytes to /proc/sys/kernel/domainname from a task in the target cgroup. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
High [CVE-2026-53381] fix UAF on submount umount
In the Linux kernel, the following vulnerability has been resolved: virtiofs: fix UAF on submount umount iput() called from fuse_release_end() can Oops if the super block has already been destroyed. Normally this is prevented by waiting for num_waiting to go down to zero before commencing with super block shutdown. This only works, however, for the last submount instance, as the wait counter is per connection, not per superblock. Revert to using synchronous release requests for the auto_submounts case, which is virtiofs only at this time. A use-after-free (UAF) vulnerability exists during submount unmount operations. This can lead to a kernel panic, resulting in a denial of service. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 6. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
High [CVE-2026-53395] fix dead ACL conflict guard in nfsd4_create
In the Linux kernel, the following vulnerability has been resolved: nfsd: fix dead ACL conflict guard in nfsd4_create nfsd4_create() steals create->cr_dpacl/cr_pacl into the local nfsd_attrs via the designated initializer, then immediately sets the source pointers to NULL. The subsequent conflict guard tests the already-nilled source fields, making it permanently dead code: if (create->cr_acl) { if (create->cr_dpacl || create->cr_pacl) /* always false */ When a client encodes both FATTR4_WORD0_ACL and FATTR4_WORD2_POSIX_{DEFAULT,ACCESS}_ACL in the same CREATE fattr bitmap, nfsd4_acl_to_attr() overwrites attrs.na_pacl/na_dpacl without releasing the originals, leaking two posix_acl slab objects per request. Repeated requests cause unbounded slab exhaustion. Fix by checking attrs.na_dpacl/na_pacl (the stolen values) instead of the nilled create->cr_dpacl/cr_pacl, matching the correct pattern already used in nfsd4_setattr(). A flaw was found in the Linux kernel's Network File System (NFS) daemon (nfsd). A remote attacker can exploit this vulnerability by sending specially crafted NFS CREATE requests that include conflicting Access Control List (ACL) attributes. This leads to a memory leak, where the system fails to release memory objects, causing unbounded memory exhaustion.
High [CVE-2026-63826] fix use-after-free in store_modes
In the Linux kernel, the following vulnerability has been resolved: fbdev: fix use-after-free in store_modes() store_modes() replaces a framebuffer's modelist with modes from userspace. On success it frees the old modelist with fb_destroy_modelist(). Two fields still point into that freed list. One pointer is fb_display[i].mode, the mode a console is using. fbcon_new_modelist() moves these pointers to the new list. It only does so for consoles still mapped to the framebuffer. An unmapped console is skipped and keeps its stale pointer. Unbinding fbcon, for example, sets con2fb_map[i] to -1 but leaves fb_display[i].mode set. An FBIOPUT_VSCREENINFO ioctl with FB_ACTIVATE_INV_MODE later reaches fbcon_mode_deleted(). That function reads the stale fb_display[i].mode through fb_mode_is_equal(). The other pointer is fb_info->mode, the current mode. It is set through the mode sysfs attribute. store_modes() does not update fb_info->mode, so it is left pointing into the freed list. show_mode(), the attribute's read handler, dereferences the stale fb_info->mode through mode_string(). Clear both pointers before freeing the list. Commit a1f305893074 ("fbcon: Set fb_display[i]->mode to NULL when the mode is released") added the helper fbcon_delete_modelist(). It clears every fb_display[i].mode that points into a given list. So far it is called only from the unregister path.
High [CVE-2026-63795] avoid putting oldfid in p9_client_walk error path
In the Linux kernel, the following vulnerability has been resolved: 9p: avoid putting oldfid in p9_client_walk() error path When p9_client_walk() is called with clone set to false, fid aliases oldfid. If the walk subsequently fails after the request has been sent, the error path jumps to clunk_fid, which currently calls p9_fid_put(fid) unconditionally. This drops a reference to oldfid even though ownership of oldfid remains with the caller. If this is the last reference, oldfid can be clunked and destroyed while the caller still expects it to be valid. A later use or put of oldfid can then trigger a use-after-free or refcount underflow. Fix this by only putting fid in the clunk_fid error path when it does not alias oldfid, matching the existing guard in the error path below. This can be triggered when a multi-component walk is split into multiple p9_client_walk() calls and a later non-cloning walk fails. A reproducer and refcount warning logs are available on request. A flaw was found in the Linux kernel's 9p filesystem client. A reference counting error in the `p9_client_walk()` function can lead to a use-after-free or reference count underflow. This vulnerability may allow a local attacker to cause a system crash, resulting in a Denial of Service, or potentially achieve privilege escalation.
High [CVE-2026-53384] unregister 8250 port if clk_notifier_register fails
In the Linux kernel, the following vulnerability has been resolved: serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails dw8250_probe() registers the 8250 port via serial8250_register_8250_port() and then, if the device has a clock, registers a clock notifier. If clk_notifier_register() fails, probe returns the error but leaves the 8250 port registered. The matching serial8250_unregister_port() lives in dw8250_remove(), which is not called when probe fails, so the port slot stays occupied until the device is rebound or the system is rebooted. The devm-allocated driver data is freed while the port still references it (via the saved private_data and serial_in/serial_out callbacks), so any access to that port slot before a rebind is a use-after-free hazard. When the `clk_notifier_register()` function fails during the probe process, the 8250 port is not properly unregistered. This oversight can lead to a use-after-free vulnerability, where previously freed memory is still referenced. An attacker could potentially exploit this to cause system instability or execute arbitrary code. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.
High [CVE-2026-63823] Pin request_key_auth payload in instantiate paths
In the Linux kernel, the following vulnerability has been resolved: keys: Pin request_key_auth payload in instantiate paths A: request_key() B: KEYCTL_INSTANTIATE_IOV ================ ========================= create auth key store rka in auth key wait for helper get auth key load rka from auth key copy user payload sleep on #PF helper completed detach and free rka destroy auth key wake up use rka->target_key **USE-AFTER-FREE** Give request_key_auth payloads a refcount. Take a payload reference while authkey->sem stabilizes the payload and revocation state. Hold that reference across the instantiate and reject paths. Drop the auth key owning reference from revoke and destroy. [jarkko: Replaced the first two paragraphs of text with an actual concurrency scenario.] This flaw occurs when the system attempts to use a key authorization payload after it has been released, which can lead to system instability or crashes. A local attacker could potentially exploit this to cause a denial of service or escalate their privileges. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6.
High [CVE-2026-63800] Fix use-after-free in pnfs_update_layout
In the Linux kernel, the following vulnerability has been resolved: pNFS: Fix use-after-free in pnfs_update_layout() When hitting the NFS_LAYOUT_RETURN branch in pnfs_update_layout(), the code calls pnfs_prepare_to_retry_layoutget(lo). If it succeeds, pnfs_put_layout_hdr(lo) is called before trace_pnfs_update_layout(), which still references 'lo'. This results in a use-after-free when the tracepoint accesses lo's fields. Fix this by moving the tracepoint call before pnfs_put_layout_hdr(lo). A flaw was found in the Linux kernel's parallel Network File System (pNFS) component. An issue in the `pnfs_update_layout()` function causes a use-after-free vulnerability due to incorrect ordering of memory management operations. This flaw can be triggered when the system attempts to update a pNFS layout, potentially leading to system instability, crashes, or a denial of service. In some scenarios, this type of memory corruption could be exploited by a local attacker to achieve arbitrary code execution. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE.
High [CVE-2026-53393] reset write verifier on deferred writeback errors
In the Linux kernel, the following vulnerability has been resolved: nfsd: reset write verifier on deferred writeback errors nfsd_vfs_write() and nfsd_commit() both call filemap_check_wb_err() to detect deferred writeback errors, but neither rotates the server's write verifier (nn->writeverf) when this check fails. Every other durable-storage-failure path in these functions calls commit_reset_write_verifier() before returning an error. The missing rotation means clients holding UNSTABLE write data under the current verifier will COMMIT, receive the unchanged verifier back, and conclude their data is durable — silently dropping data that failed writeback. This violates the UNSTABLE+COMMIT durability contract (RFC 1813 §3.3.7, RFC 8881 §18.32). Add commit_reset_write_verifier() calls at both filemap_check_wb_err() error sites, matching the pattern used by adjacent error paths in the same functions. The helper already filters -EAGAIN and -ESTALE internally, so the calls are unconditionally safe. A flaw was found in the Linux kernel's Network File System (NFS) daemon. This vulnerability occurs when the NFS daemon fails to reset the write verifier during deferred writeback errors for UNSTABLE writes. A remote attacker, acting as an NFS client, could exploit this by performing operations that trigger these errors.
High [CVE-2026-53398] Fix SECINFO_NO_NAME decode error cleanup
In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix SECINFO_NO_NAME decode error cleanup nfsd4_decode_secinfo_no_name() currently initializes sin_exp after decoding sin_style. If the XDR stream is truncated, the decoder returns nfserr_bad_xdr before sin_exp is initialized. Since commit 3fdc54646234 ("NFSD: Reduce amount of struct nfsd4_compoundargs that needs clearing"), the inline iops array is not cleared between RPC calls. A failed SECINFO_NO_NAME decode can therefore leave sin_exp holding stale union contents from a previous operation. The error response path still invokes nfsd4_secinfo_no_name_release(), which calls exp_put() on a non-NULL sin_exp. Initialize sin_exp before the first failable decode step, matching nfsd4_decode_secinfo(). A flaw was found in the Linux kernel's Network File System Daemon (NFSD). The nfsd4_decode_secinfo_no_name() function does not properly initialize a pointer (sin_exp) before processing an incoming data stream. If the data stream is malformed or truncated, the uninitialized pointer can retain stale data from previous operations. This can lead to an improper cleanup operation, potentially causing system instability or a denial of service. Red Hat severity: Important — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-824.
High [CVE-2026-63797] Fix use-after-free on probe error path
In the Linux kernel, the following vulnerability has been resolved: rpmsg: char: Fix use-after-free on probe error path rpmsg_chrdev_probe() stores the newly allocated eptdev in the default endpoint's priv pointer before calling rpmsg_chrdev_eptdev_add(). If rpmsg_chrdev_eptdev_add() then fails, its error path frees eptdev while the default endpoint may still dispatch callbacks with the stale priv pointer. Avoid publishing eptdev through the default endpoint until rpmsg_chrdev_eptdev_add() succeeds. Messages received before the priv pointer is published should be ignored by rpmsg_ept_cb(). Flow-control updates can hit rpmsg_ept_flow_cb() in the same window, so make both callbacks return success when priv is NULL. A flaw was found in the Linux kernel's rpmsg character device. This vulnerability, a use-after-free, occurs during the probe process when an internal pointer to a device endpoint (eptdev) is prematurely stored. If an error occurs during the device's addition, the eptdev memory is freed, but the system may still attempt to access this freed memory. This could lead to system instability or potentially allow an attacker to execute arbitrary code. Red Hat severity: Important — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE.
High [CVE-2026-53397] fix posix_acl leak on SETACL decode failure
In the Linux kernel, the following vulnerability has been resolved: nfsd: fix posix_acl leak on SETACL decode failure nfsaclsvc_decode_setaclargs() and nfs3svc_decode_setaclargs() each call nfs_stream_decode_acl() twice, first for NFS_ACL and then for NFS_DFACL. Each successful call transfers ownership of a freshly allocated posix_acl into argp->acl_access or argp->acl_default. If the first call succeeds but the second fails, the decoder returns false and argp->acl_access is left dangling. ACLPROC2_SETACL.pc_release was wired to nfssvc_release_attrstat and ACLPROC3_SETACL.pc_release was wired to nfs3svc_release_fhandle. Both only call fh_put() and have no knowledge of the ACL fields on argp. The posix_acl_release() pairs sat at the out: labels inside nfsacld_proc_setacl() and nfsd3_proc_setacl(), but svc_process() skips pc_func when pc_decode returns false, so that cleanup is unreachable on decode failure: svc_process_common() pc_decode() /* decode_setaclargs: false */ /* pc_func skipped */ pc_release() /* fh_put only -- ACLs leaked */ The orphaned posix_acl is leaked for the lifetime of the server. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; and 2 more.
High [CVE-2026-63829] require CAP_NET_ADMIN in the device netns for changelink
In the Linux kernel, the following vulnerability has been resolved: net: ip_gre: require CAP_NET_ADMIN in the device netns for changelink A tunnel changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Add rtnl_dev_link_net_capable() next to rtnl_get_net_ns_capable() in net/core/rtnetlink.c. It requires CAP_NET_ADMIN in the link netns and is skipped when the link netns is dev_net(dev), where the rtnl path already checked it. The other patches in this series use the same helper. Gate ipgre_changelink() and erspan_changelink() with it, at the top of the op before any attribute is parsed, because the parsers update live tunnel fields first. ipgre_netlink_parms() sets t->collect_md before ip_tunnel_changelink() runs. Commit 8b484efd5cb4 ("ip6: vti: Use ip6_tnl.net in vti6_siocdevprivate().") added the same check on the ioctl path. This adds it on RTM_NEWLINK. A flaw was found in the Linux kernel's IP Generic Routing Encapsulation (ip_gre) component.
High [CVE-2026-63808] fix potential use-after-free in exfat_find_dir_entry
In the Linux kernel, the following vulnerability has been resolved: exfat: fix potential use-after-free in exfat_find_dir_entry() In exfat_find_dir_entry(), the buffer_head obtained from exfat_get_dentry() is released with brelse(bh) before the fall-through TYPE_EXTEND branch reads the directory entry through ep (which points into bh->b_data): brelse(bh); if (entry_type == TYPE_EXTEND) {... len = exfat_extract_uni_name(ep, entry_uniname);... } After brelse() drops our reference, nothing guarantees that the underlying page backing bh->b_data remains valid for the subsequent exfat_extract_uni_name() read. This is the same pattern fixed in commit fc961522ddbd ("exfat: Fix potential use after free in exfat_load_upcase_table()"). Move brelse(bh) so it runs after ep is no longer dereferenced on each branch. Confirmed on QEMU x86_64 with CONFIG_KASAN=y + CONFIG_DEBUG_PAGEALLOC=y + CONFIG_PAGE_POISONING=y on linux-next, using a crafted exFAT image (long filename with same-hash collisions forcing the TYPE_EXTEND path). Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
High [CVE-2026-53399] release layout stid on setlease failure
In the Linux kernel, the following vulnerability has been resolved: nfsd: release layout stid on setlease failure nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via idr_alloc_cyclic() under cl_lock before returning to nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then fails, the error path frees the layout stateid directly with kmem_cache_free() without ever calling idr_remove(), leaving the IDR slot pointing at freed slab memory. Any subsequent IDR walker (states_show, client teardown) dereferences the dangling pointer. The correct teardown for an IDR-published stid is nfs4_put_stid(), which removes the IDR slot under cl_lock, dispatches sc_free (nfsd4_free_layout_stateid) to release ls->ls_file via nfsd4_close_layout(), and drops the nfs4_file reference in its tail. A second issue blocks that switch: nfsd4_free_layout_stateid() unconditionally inspects ls->ls_fence_work via delayed_work_pending() under ls_lock, but INIT_DELAYED_WORK(&ls->ls_fence_work,...) currently runs only after the setlease call. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; and 1 more.
High [CVE-2026-53392] reject zero filehandle version count
In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: reject zero filehandle version count ff_layout_alloc_lseg() decodes the filehandle-version array count from the flexfiles layout body. The value is used as the count for kzalloc_objs(), and the current code only rejects NULL. A zero count yields ZERO_SIZE_PTR, which can be stored in dss_info->fh_versions even though later flexfiles paths assume that at least one filehandle version exists. Reject fh_count == 0 before the allocation, matching the existing zero version_count validation in the flexfiles GETDEVICEINFO parser. A QEMU/KASAN run with a malformed flexfiles layout hit: KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:ff_layout_encode_ff_layoutupdate.isra.0+0x15f/0x750 ff_layout_encode_layoutreturn+0x683/0x970 nfs4_xdr_enc_layoutreturn+0x278/0x3a0 Kernel panic - not syncing: Fatal exception The patched kernel rejects the malformed layout without KASAN/oops/panic, and a valid fh_count=1 regression still opens, reads, and unmounts cleanly. A flaw was found in the Linux kernel's NFSv4 (Network File System version 4) flexfiles component. An attacker could exploit this by providing a specially crafted flexfiles layout, leading to a null-pointer dereference and ultimately causing a kernel panic, resulting in a Denial of Service (DoS) for the system.
High [CVE-2026-63794] Fix page overflow in sev_dbg_crypt for ENCRYPT path
In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Fix page overflow in sev_dbg_crypt() for ENCRYPT path In sev_dbg_crypt(), the per-iteration transfer length is bounded by the source page offset (PAGE_SIZE - s_off) but not by the destination page offset (PAGE_SIZE - d_off). When d_off > s_off, the encrypt path (__sev_dbg_encrypt_user) performs a read-modify-write using a single-page intermediate buffer (dst_tpage): 1. __sev_dbg_decrypt() expands the size to round_up(len + (d_off & 15), 16) before issuing the PSP command. If len + (d_off & 15) > PAGE_SIZE, the PSP writes beyond the end of the 4096-byte dst_tpage allocation. 2. The subsequent memcpy()/copy_from_user() into page_address(dst_tpage) + (d_off & 15) of 'len' bytes overflows by up to 15 bytes under the same condition. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
High [CVE-2026-63831] add skb_cow_data before in-place crypto
In the Linux kernel, the following vulnerability has been resolved: mac802154: llsec: add skb_cow_data() before in-place crypto llsec_do_encrypt_unauth(), llsec_do_encrypt_auth(), llsec_do_decrypt_unauth(), and llsec_do_decrypt_auth() all perform in-place cryptographic transformations on skb data. They build a scatterlist with sg_init_one() pointing into the skb's linear data area and then pass the same scatterlist as both src and dst to the crypto API (e.g. crypto_skcipher_encrypt/decrypt, crypto_aead_encrypt/decrypt). On the RX path, __ieee802154_rx_handle_packet() clones the received skb before handing it to each subscriber via ieee802154_subif_frame(). The cloned skb shares the same underlying data buffer via reference counting. When llsec_do_decrypt() subsequently modifies this shared buffer in place, it corrupts data that other clones -- potentially belonging to other sockets or subsystems -- still reference. On the TX path, similar data sharing can occur when an skb's head has been cloned (skb_cloned() returns true). The fix is to call skb_cow_data() before performing any in-place crypto operation. skb_cow_data() ensures that the skb's data area is not shared: if the skb head is cloned or the data spans multiple fragments, it copies the data into a private buffer that can be safely modified in place.
High [CVE-2026-63824] fix overflow in keyctl_pkey_params_get_2
In the Linux kernel, the following vulnerability has been resolved: KEYS: fix overflow in keyctl_pkey_params_get_2() The length for the internal output buffer is calculated incorrectly, which can result overflow when a too small buffer is provided. Fix the bug by allocating internal output with the size of the maximum length of the cryptographic primitive instead of caller provided size. A flaw was found in the Linux kernel's `keyctl_pkey_params_get_2()` function within the KEYS subsystem. This flaw could allow a local attacker to corrupt memory, potentially leading to a denial of service or other unspecified impacts. Red Hat severity: Important — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-787. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.