Skip to content
VulniPulse

Complete feed

Recently updated

Advisories the vendor has revised

Home overview

Android app · Google Play

Take your CVE monitoring with you.

Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 32 official vendor sources and 160+ reviewed platform categories.

High7.0Red Hat

High [CVE-2026-63887] Bound iscsi_encode_text_output appends to rsp_buf

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf iscsi_encode_text_output() concatenates "key=value\0" records into login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check the remaining buffer capacity: *length += sprintf(output_buf, "%s=%s", er->key, er->value); *length += 1; output_buf = textbuf + *length; The 8192-byte ceiling at iscsi_target_check_login_request() bounds the *input* Login PDU payload, but a single PDU can carry up to 2048 minimal four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte "a=NotUnderstood\0" output record via iscsi_add_notunderstood_response(). 2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB heap overrun in the kmalloc-8k slab. The fix introduces a static iscsi_encode_text_record() helper that uses snprintf() with a per-call bounds check against the remaining buffer, and threads a u32 textbuf_size parameter through iscsi_encode_text_output(). Both call sites in iscsi_target_handle_csg_zero() (PHASE_SECURITY) and iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass MAX_KEY_VALUE_PAIRS.

CVE-2026-63887
Linux Kernel
Jul 19, 2026
High7.0Vendor: MediumRed Hat

High [CVE-2026-63891] Cap recursion depth in __tb_property_parse_dir

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: property: Cap recursion depth in __tb_property_parse_dir() A DIRECTORY entry's value field is used as the dir_offset for a recursive call into __tb_property_parse_dir() with no depth counter. A crafted peer that chains DIRECTORY entries into a back-reference loop drives the parser until the kernel stack is exhausted and the guard page fires. Any untrusted XDomain peer (cable, dock, in-line inspector, adjacent host) that reaches the PROPERTIES_REQUEST control-plane exchange can trigger this without authentication. Thread a depth counter through tb_property_parse() and __tb_property_parse_dir(), and reject blocks that exceed TB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than any observed legitimate XDomain layout. Operators who do not need XDomain host-to-host discovery can disable the path entirely with thunderbolt.xdomain=0 on the kernel command line. An untrusted Thunderbolt peer, such as a cable or dock, can send specially crafted property requests that create a recursive loop. This can lead to kernel stack exhaustion, resulting in a system crash and a Denial of Service (DoS). Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-606.

CVE-2026-63891
Unclassified
Jul 19, 2026
High7.0Red Hat

High [CVE-2026-64017] pop cached request if it is usable

In the Linux kernel, the following vulnerability has been resolved: blk-mq: pop cached request if it is usable When submitting a bio to blk-mq, if the task should sleep after peeking a cached request, but before it pops it, the plug flushes and calls blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a use-after-free bug. Fix this by popping the cached request before any possible blocking calls if it is suitable for use. Popping this request first holds a queue reference, so avoid any serialization races with queue freezes and can safely proceed with dispatching that request to the driver. This potentially increases a timing window from when a driver wants to freeze its queue to when requests stop being dispatched. That scenario is off the fast path though, and drivers need to appropriately handle requests during a freeze request anyway. The downside is the popped element needs to be individually freed when we performed a bio plug merge. The cached request would have had to be freed later anyway, but this patch does it inline with building the plug list instead of after flushing it. This use-after-free vulnerability occurs when a task attempts to submit a bio (a data structure for I/O operations) to blk-mq. If the task is interrupted and sleeps after checking for a cached request but before using it, the cached request can be prematurely freed.

CVE-2026-64017
Linux Kernel
Jul 19, 2026
High7.0Red Hat

High [CVE-2026-64008] fix UAF via dangling GEM handle in create_bo

In the Linux kernel, the following vulnerability has been resolved: accel/rocket: fix UAF via dangling GEM handle in create_bo rocket_ioctl_create_bo() inserts a GEM handle into the file's IDR via drm_gem_handle_create() early on, then performs several operations that can fail (sgt allocation, drm_mm insert, iommu_map). If any fail after the handle is live, the error path calls drm_gem_shmem_object_free() which kfree's the object without removing the handle from the IDR. This leaves a dangling handle pointing to freed slab memory. Any subsequent ioctl using that handle (PREP_BO, FINI_BO, SUBMIT) calls drm_gem_object_lookup() and dereferences freed memory (UAF). Fix by moving drm_gem_handle_create() to after all fallible operations succeed, matching the pattern used by panfrost, lima, and etnaviv. Also fix drm_mm_insert_node_generic() whose return value was silently overwritten by iommu_map_sgtable() on the next line. Add the missing error check. [tomeu: Move handle creation to the very end] This vulnerability, a Use-After-Free (UAF), occurs in the rocket_ioctl_create_bo() function. A local attacker could exploit this by triggering a failure in subsequent operations after a Graphics Execution Manager (GEM) handle is created, leading to a dangling pointer to freed memory.

CVE-2026-64008
Unclassified
Jul 19, 2026
High7.0Red Hat

High [CVE-2026-64030] bounds-check link_id in ieee80211_ml_epcs

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs IEEE80211_MLE_STA_EPCS_CONTROL_LINK_ID is 0x000f, so link_id extracted from a PRIO_ACCESS ML element PER_STA_PROFILE subelement can be 0..15. sdata->link[] has IEEE80211_MLD_MAX_NUM_LINKS (15) entries (indices 0..14), making index 15 out-of-bounds. A connected WiFi 7 AP can trigger this by sending an EPCS Enable Response action frame with a PER_STA_PROFILE subelement where link_id = 15. The unsolicited-notification path (dialog_token = 0) is reachable any time EPCS is already enabled, without any prior client request. sdata->link[15] reads into the first word of sdata->activate_links_work (a wiphy_work whose embedded list_head is non-NULL after INIT_LIST_HEAD), so the NULL check on the result does not catch the invalid access. The garbage pointer is then passed to ieee80211_sta_wmm_params(), which dereferences link->sdata and crashes the kernel. The same class of bug was fixed for ieee80211_ml_reconfiguration() by commit 162d331d833d ("wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration"). This vulnerability can lead to a kernel crash, resulting in a Denial of Service (DoS) for the affected system. Red Hat severity: Important — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-476.

CVE-2026-64030
Linux Kernel
Jul 19, 2026
High7.3Vendor: MediumRed Hat

High [CVE-2026-63974] Set HCI_CMD_DRAIN_WORKQUEUE during device close

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close Since hci_dev_close_sync() can now be called during the reset path, we should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts while the hdev workqueue is being drained. When the hci_dev_close_sync() function is called during a device reset, the system may experience queuing timeouts. This occurs because the HCI_CMD_DRAIN_WORKQUEUE flag is not properly set, which can lead to system instability or a denial of service (DoS) condition. Red Hat severity: Moderate — CVSS 7.3 (CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H). Weakness: CWE-366. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.

CVE-2026-63974
Linux Kernel
Jul 19, 2026
High7.0Red Hat

High [CVE-2026-63879] fix amdgpu_hmm_range_get_pages

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix amdgpu_hmm_range_get_pages The notifier sequence must only be read once or otherwise we could work with invalid pages. While at it also fix the coding style, e.g. drop the pre-initialized return value and use the common define for 2G range. (cherry picked from commit c08972f555945cda57b0adb72272a37910153390) A flaw was found in the Linux kernel, specifically within the `drm/amdgpu` component. This vulnerability arises from incorrect handling of a notifier sequence in the `amdgpu_hmm_range_get_pages` function, where the sequence can be read more than once. This can lead to the system processing invalid memory pages, potentially resulting in system instability or crashes. Red Hat severity: Important — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-824. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat Enterprise Linux 7. Red Hat fixing advisory: RHSA-2026:57251, RHSA-2026:55765, RHSA-2026:55764, RHSA-2026:57252. Affected products named by the advisory: Red Hat package: kernel-rt.

CVE-2026-63879
Linux Kernel
Jul 19, 2026
High7.0Vendor: MediumRed Hat

High [CVE-2026-63896] fix integer underflow in WebUSB GET_URL handling

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix integer underflow in WebUSB GET_URL handling The WebUSB GET_URL handler in composite_setup() narrows landing_page_length to fit the host-supplied wLength using landing_page_length = w_length - WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset; If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the unsigned subtraction wraps, and the subsequent memcpy(url_descriptor->URL, cdev->landing_page + landing_page_offset, landing_page_length - landing_page_offset); ends up copying close to UINT_MAX bytes from cdev->landing_page into cdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setup on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the memcpy as a 4294967293-byte field-spanning write into url_descriptor->URL (size 252). A USB host can reach this from a single SETUP packet against any gadget that has webusb/use=1 and a landingPage configured. Handle the small-wLength case before the math: when the host requested fewer bytes than the URL descriptor header, only the header is meaningful and no URL bytes need to be copied. Setting landing_page_length to landing_page_offset makes the existing memcpy a no-op and leaves the descriptor returned to the host unchanged for all larger wLength values.

CVE-2026-63896
Linux Kernel
Jul 19, 2026
High7.0Vendor: MediumRed Hat

High [CVE-2026-63971] fix race between sctp_wait_for_connect and peeloff

In the Linux kernel, the following vulnerability has been resolved: sctp: fix race between sctp_wait_for_connect and peeloff sctp_wait_for_connect() drops and re-acquires the socket lock while waiting for the association to reach ESTABLISHED state. During this window, another thread can peeloff the association to a new socket via getsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. After re-acquiring the old socket lock, sctp_wait_for_connect() returns success without noticing the migration — the caller then accesses the association under the wrong lock in sctp_datamsg_from_user(). Add the same sk!= asoc->base.sk check that sctp_wait_for_sndbuf() already has, returning an error if the association was migrated while we slept. A flaw was found in the Linux kernel's Stream Control Transmission Protocol (SCTP) implementation. A race condition exists in the sctp_wait_for_connect() function, where a socket lock is temporarily released and re-acquired. During this brief period, another process can move the SCTP association to a different socket. This can cause subsequent operations to access memory incorrectly, potentially leading to system instability or denial of service. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-367.

CVE-2026-63971
Linux Kernel
Jul 19, 2026
High7.0Vendor: MediumRed Hat

High [CVE-2026-64032] Fix a possible use-after-free when removing a bridge port

In the Linux kernel, the following vulnerability has been resolved: bridge: mcast: Fix a possible use-after-free when removing a bridge port When per-VLAN multicast snooping is enabled, the bridge iterates over all the bridge ports, disables the per-port multicast context on each port and enables the per-{port, VLAN} multicast contexts instead. The reverse happens when multicast snooping is disabled. The above scheme can result in a situation where both types of contexts (per-port and per-{port, VLAN}) are enabled on a single bridge port: # ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev br1 type bridge mcast_vlan_snooping 1 # ip link set dev br1 type bridge mcast_snooping 0 # ip link set dev br1 type bridge mcast_snooping 1 This is not intended and it is a problem since the commit cited below. Prior to this commit, when removing a bridge port, br_multicast_disable_port() would disable the per-port multicast context and the per-{port, VLAN} multicast contexts would get disabled when flushing VLANs. If both types of contexts were enabled on the port when it was removed, the per-port multicast context would remain enabled when freeing the bridge port, leading to a use-after-free [1].

CVE-2026-64032
Linux Kernel
Jul 19, 2026
High7.0Vendor: MediumRed Hat

High [CVE-2026-64024] fix stale per-CPU tcp_tw_isn leak enabling ISN prediction

In the Linux kernel, the following vulnerability has been resolved: tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction Blamed commit moved the TIME_WAIT-derived ISN from the skb control block to a per-CPU variable, assuming the value would always be consumed by tcp_conn_request() for the same packet that wrote it. That assumption is violated by multiple drop paths between the producer (__this_cpu_write(tcp_tw_isn, isn) in tcp_v{4,6}_rcv()) and the consumer (tcp_conn_request()): - min_ttl / min_hopcount check - xfrm policy check - tcp_inbound_hash() MD5/AO mismatch - tcp_filter() eBPF/SO_ATTACH_FILTER drop - th->syn && th->fin discard in tcp_rcv_state_process() TCP_LISTEN - psp_sk_rx_policy_check() in tcp_v{4,6}_do_rcv() - tcp_checksum_complete() in tcp_v{4,6}_do_rcv() - tcp_v{4,6}_cookie_check() returning NULL When a packet is dropped on any of these paths, tcp_tw_isn is left set. The next SYN processed on the same CPU then consumes the non zero value in tcp_conn_request(), receiving a potentially predictable ISN. This patch moves back tcp_tw_isn to skb->cb[], getting rid of the per-cpu variable. Note that tcp_v{4,6}_fill_cb() do not set it. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.

CVE-2026-64024
Linux Kernel
Jul 19, 2026
High7.1Vendor: MediumRed Hat

High [CVE-2026-64020] fix dma_vecs leak on p2p memory

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix dma_vecs leak on p2p memory We don't unmap P2P memory, so we don't need to track it. The dma_vec allocation was getting leaked on the completion. This vulnerability occurs due to improper handling of peer-to-peer (P2P) memory, where dma_vec allocations are not correctly unmapped. This oversight leads to a memory leak, which can degrade system performance and potentially lead to a denial of service over an extended period. Red Hat severity: Moderate — CVSS 7.1 (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.

CVE-2026-64020
Linux Kernel
Jul 19, 2026
High7.0Vendor: MediumRed Hat

High [CVE-2026-64027] rework the VALID marking (again)

In the Linux kernel, the following vulnerability has been resolved: net: shaper: rework the VALID marking (again) Recent commit changed the semantics from NOT_VALID to VALID. I didn't realize that the flags are not stored atomically with the entry in XArray. There's still a race of reader observing a VALID mark for a slot, getting interrupted, writer replacing the entry with a different one, reader continuing, fetching the entry which is now a different pointer than the pointer for which VALID was meant. The biggest consequence of this is that we may see a UAF since net_shaper_rollback() assumed that entries without VALID can be freed without observing RCU. Looks like the XArray marks are buying us nothing at this point. Let's convert the code to an explicit valid field. The smp_load_acquire() / smp_store_release() barriers are marginally cleaner. A race condition exists in how `VALID` marks are handled for entries in an XArray. This can lead to a Use-After-Free (UAF) vulnerability, where memory is incorrectly freed while still in use, potentially allowing an attacker to cause a denial of service or execute arbitrary code. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-367. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.

CVE-2026-64027
Linux Kernel
Jul 19, 2026
High7.0Vendor: MediumRed Hat

High [CVE-2026-64011] Fix use-after-free in llcp_sock_release

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix use-after-free in llcp_sock_release() llcp_sock_release() unconditionally unlinks the socket from the local sockets list. However, if the socket is still in connecting state, it is on the connecting list. Fix this by checking the socket state and unlinking from the correct list. A flaw was found in the Linux kernel's Near Field Communication (NFC) Logical Link Control Protocol (LLCP) component. This can result in a use-after-free vulnerability, where the system attempts to access deallocated memory. A local attacker could potentially exploit this to cause a system crash (denial of service) or, in some scenarios, execute arbitrary code. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.

CVE-2026-64011
Unclassified
Jul 19, 2026
High7.0Vendor: MediumRed Hat

High [CVE-2026-63975] Fix possible crash on l2cap_ecred_conn_rsp

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp If dcid is received for an already-assigned destination CID the spec requires that both channels to be discarded, but calling l2cap_chan_del may invalidate the tmp cursor created by list_for_each_entry_safe and in fact it is the wrong procedure as the chan->dcid may be assigned previously it really needs to be disconnected. Calling l2cap_chan_clone directly may still lead to l2cap_chan_del so instead schedule l2cap_chan_timeout with delay 0 to close the channel asynchronously. A flaw was found in the Bluetooth L2CAP (Logical Link Control and Adaptation Protocol) component of the Linux kernel. When a device receives a connection response with an already-assigned destination Channel Identifier (CID), the system may crash. This occurs because the kernel's procedure for discarding both channels in this scenario can lead to incorrect channel deletion, causing instability. This vulnerability can be triggered by a remote attacker sending a specially crafted Bluetooth L2CAP packet, potentially leading to a denial of service. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9.

CVE-2026-63975
Linux Kernel
Jul 19, 2026
High7.0Vendor: MediumRed Hat

High [CVE-2026-64029] Serialize UMP output teardown with event_input

In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Serialize UMP output teardown with event_input seq_ump_process_event() borrows client->out_rfile.output without synchronizing with the first-open and last-close transition in seq_ump_client_open() and seq_ump_client_close(). The last output unuse can therefore drop opened[STR_OUT] to zero and release the rawmidi file while an in-flight event_input callback is still inside snd_rawmidi_kernel_write(). That leaves the rawmidi substream runtime exposed to teardown before the write path has taken its own buffer reference. Add a per-client rwlock for the event_input-visible output file. Publish a newly opened output file under the write side, and hold the read side from the output lookup through snd_rawmidi_kernel_write(). The last output close copies and clears the visible output file under the write side, then drops the lock and releases the saved rawmidi file. Use IRQ-safe rwlock guards because event_input can also be reached from atomic sequencer delivery. The buggy scenario involves two paths, with each column showing the order within that path: path A label: event_input path path B label: last unuse path 1. seq_ump_process_event() reads 1. seq_ump_client_close() client->out_rfile.output. drops opened[STR_OUT] to zero.

CVE-2026-64029
Linux Kernel
Jul 19, 2026
High7.0Red Hat

High [CVE-2026-63962] bound altmode_desc per iteration in svdm_consume_modes

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes() svdm_consume_modes() checks pmdata->altmodes against the array size once before the loop over the count, but forgot to check the bound at every point in the loop. In the well-behaved SVDM discovery flow this is harmless because each of at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But the CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming ACK with any request the port actually sent. Once port->partner is set, an unsolicited Discover Modes ACK is consumed unconditionally. A broken or malicious port partner can therefore drive altmodes to ALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extra Discover Modes ACK with seven VDOs. Because the pre-loop check passes, the loop could then writes up to five entries past altmode_desc[]. For mode_data_prime the next field in struct tcpm_port is the partner_altmode[] pointer array, which then receives partner-chosen SVID/VDO bytes. Move the bound check inside the loop so the array can never be indexed past ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partner supplies or how the function was reached.

CVE-2026-63962
Linux Kernel
Jul 19, 2026
High7.0Red Hat

High [CVE-2026-64007] refresh tcphdr after skb_ensure_writable

In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: refresh tcphdr after skb_ensure_writable synproxy_tstamp_adjust() rewrites the TCP timestamp option in place and then patches the TCP checksum via inet_proto_csum_replace4() on the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and ipv6_synproxy_hook() obtain that pointer with skb_header_pointer() before calling in, so it may either alias skb->head directly or point at the caller's on-stack _tcph buffer. Between obtaining the pointer and using it, the function calls skb_ensure_writable(skb, optend), which on a cloned or non-linear skb invokes pskb_expand_head() and frees the old skb->head. After that point the cached th is stale: caller (ipv[46]_synproxy_hook) th = skb_header_pointer(skb,..., &_tcph) synproxy_tstamp_adjust(skb, protoff, th,...) skb_ensure_writable(skb, optend) pskb_expand_head() /* kfree(old skb->head) */... inet_proto_csum_replace4(&th->check,...) /* writes into freed head, or into the caller's stack copy leaving the on-wire checksum stale */ The option bytes are written through skb->data and are fine; only the checksum update goes through th and so lands in the wrong place. The result is either a write into freed slab memory or a packet leaving with a checksum that does not match its payload.

CVE-2026-64007
Linux Kernel
Jul 19, 2026
High7.0Red Hat

High [CVE-2026-64002] free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table

In the Linux kernel, the following vulnerability has been resolved: ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table() ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports too soon. Only after unregister_net_sysctl_table() we can be sure no threads can possibly use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports. A flaw was found in the Linux kernel's IPv4 networking component. The `ipv4_sysctl_exit_net()` function prematurely frees the `net->ipv4.sysctl_local_reserved_ports` memory. This can lead to a use-after-free vulnerability, where other threads might attempt to access deallocated memory. Such an issue can result in system instability or a denial of service. Red Hat severity: Important — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.

CVE-2026-64002
Linux Kernel
Jul 19, 2026
High7.0Red Hat

High [CVE-2026-63993] do not reuse cached ip_hdr value after skb_tunnel_check_pmtu

In the Linux kernel, the following vulnerability has been resolved: vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu() skb_tunnel_check_pmtu() can change skb->head. Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF. Use instead ip_hdr(skb) as done in drivers/net/bareudp.c and drivers/net/geneve.c. Found by Sashiko. A flaw was found in the Linux kernel's Virtual Extensible LAN (VXLAN) module. This vulnerability occurs because a cached IP header pointer is improperly reused after a Path Maximum Transmission Unit (PMTU) check. When the packet's head is modified during the PMTU check, the old cached IP header pointer becomes invalid, leading to a Use-After-Free (UAF) condition. This memory corruption flaw can potentially allow an attacker to cause a system crash or execute arbitrary code. Red Hat severity: Important — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.

CVE-2026-63993
Linux Kernel
Jul 19, 2026