VulniPulse uses Google Ads measurement to understand visits from advertisements and campaign performance. It runs cookie-free until you choose — accepting enables cookies for more accurate attribution. Rejecting keeps it cookie-free and never limits the site.
See exactly what is measuredComplete feed
74 advisories across 32 monitored vendors.
A Missing Authorization vulnerability in the CLI of Juniper Networks Junos OS and Junos OS Evolved allows a local user with low privileges to read sensitive information. A local user with low privileges can execute the CLI command 'show mgd' with specific arguments which will expose sensitive information. This issue affects Junos OS: * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S1, * 25.2 version before 25.2R1-S2, 25.2R2; Junos OS Evolved: * all versions before 23.2R2-S6-EVO, * 23.4 version before 23.4R2-S6-EVO, * 24.2 version before 24.2R2-S4-EVO, * 24.4 versions before 24.4R2-S1-EVO, * 25.2 versions before 25.2R2-EVO. Affected products named by the advisory: EX. Affected products named by the advisory: EX.
A Missing Release of Memory after Effective Lifetime vulnerability in the BroadBand Edge subscriber management daemon (bbe-smgd) of Juniper Networks Junos OS on MX Series allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS). If the authentication packet-type option is configured and a received packet does not match that packet type, the memory leak occurs. When all memory available to bbe-smgd has been consumed, no new subscribers will be able to login. The memory utilization of bbe-smgd can be monitored with the following show command: user@host> show system processes extensive | match bbe-smgd The below log message can be observed when this limit has been reached: bbesmgd[]: %DAEMON-3-SMD_DPROF_RSMON_ERROR: Resource unavailability, Reason: Daemon Heap Memory exhaustion This issue affects Junos OS on MX Series: * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S5, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S2, * 24.4 versions before 24.4R2, * 25.2 versions before 25.2R2. Affected products named by the advisory: MX; EX. Affected products named by the advisory: MX; EX.
An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass the configured firewall filter and access the control-plane of the device. On MX platforms with MPC10, MPC11, LC4800 or LC9600 line cards, and MX304, firewall filters applied on a loopback interface lo0.n (where n is a non-0 number) don't get executed when lo0.n is in the global VRF / default routing-instance. An affected configuration would be: user@host# show configuration interfaces lo0 | display set set interfaces lo0 unit 1 family inet filter input <filter-name> where a firewall filter is applied to a non-0 loopback interface, but that loopback interface is not referred to in any routing-instance (RI) configuration, which implies that it's used in the default RI. The issue can be observed with the CLI command: user@device> show firewall counter filter <filter_name> not showing any matches. This issue affects Junos OS on MX Series: * all versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2, * 24.4 versions before 24.4R2. Affected products named by the advisory: MX; EX. Affected products named by the advisory: MX; EX.
An Incorrect Initialization of Resource vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on specific EX Series and QFX Series device allows an unauthenticated, network-based attacker to cause an integrity impact to downstream networks. When the same family inet or inet6 filter is applied on an IRB interface and on a physical interface as egress filter on EX4100, EX4400, EX4650 and QFX5120 devices, only one of the two filters will be applied, which can lead to traffic being sent out one of these interfaces which should have been blocked. This issue affects Junos OS on EX Series and QFX Series: * 23.4 version 23.4R2-S6, * 24.2 version 24.2R2-S3. No other Junos OS versions are affected. Affected products named by the advisory: EX. Affected products named by the advisory: EX.
An Incorrect Synchronization vulnerability in the management daemon (mgd) of Juniper Networks Junos OS and Junos OS Evolved allows a network-based attacker with low privileges to cause a complete Denial-of-Service (DoS) of the management plane. When NETCONF sessions are quickly established and disconnected, a locking issue causes mgd processes to hang in an unusable state. When the maximum number of mgd processes has been reached, no new logins are possible. This leads to the inability to manage the device and requires a power-cycle to recover. This issue can be monitored by checking for mgd processes in lockf state in the output of 'show system processes extensive': user@host> show system processes extensive | match mgd <pid> root 20 0 501M 4640K lockf 1 0:01 0.00% mgd If the system still can be accessed (either via the CLI or as root, which might still be possible as last resort as this won't invoke mgd), mgd processes in this state can be killed with 'request system process terminate <PID>' from the CLI or with 'kill -9 <PID>' from the shell.
A Permissive List of Allowed Input vulnerability in the CLI of Juniper Networks Support Insights (JSI) Virtual Lightweight Collector (vLWC) allows a local, high privileged attacker to escalate their privileges to root. The CLI menu accepts input without carefully validating it, which allows for shell command injection. These shell commands are executed with root permissions and can be used to gain complete control of the system. This issue affects all JSI vLWC versions before 3.0.94. Affected product named by the advisory: EX. Affected product named by the advisory: EX.
An Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Juniper Networks Junos Space allows an attacker to inject script tags in the list filter field that, when visited by another user, enables the attacker to execute commands with the target's permissions, including an administrator. This issue affects all versions of Junos Space before 24.1R5 Patch V3. Affected products named by the advisory: EX. Affected products named by the advisory: EX.
A Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in the advanced forwarding toolkit (evo-aftmand/evo-pfemand) of Juniper Networks Junos OS Evolved on PTX Series or QFX5000 Series allows an unauthenticated, adjacent attacker to cause a Denial of Service (DoS).An attacker sending crafted multicast packets will cause line cards running evo-aftmand/evo-pfemand to crash and restart or non-line card devices to crash and restart. Continued receipt and processing of these packets will sustain the Denial of Service (DoS) condition. This issue affects Junos OS Evolved PTX Series: * All versions before 22.4R3-S8-EVO, * from 23.2 before 23.2R2-S5-EVO, * from 23.4 before 23.4R2-EVO, * from 24.2 before 24.2R2-EVO, * from 24.4 before 24.4R2-EVO. This issue does not affect Junos OS Evolved on QFX5000 Series versions before: 21.2R2-S1-EVO, 21.2R3-EVO, 21.3R2-EVO, 21.4R1-EVO, and 22.1R1-EVO.
A Missing Authentication for Critical Function vulnerability in command processing of Juniper Networks Junos OS allows a privileged local attacker to gain access to Linux-based line cards as root. This issue affects systems running Junos OS using Linux-based line cards. Affected line cards include: * MPC7, MPC8, MPC9, MPC10, MPC11 * LC2101, LC2103 * LC480, LC4800, LC9600 * MX304 (built-in FPC) * MX-SPC3 * SRX5K-SPC3 * EX9200-40XS * FPC3-PTX-U2, FPC3-PTX-U3 * FPC3-SFF-PTX * LC1101, LC1102, LC1104, LC1105 This issue affects Junos OS: * all versions before 22.4R3-S8, * from 23.2 before 23.2R2-S6, * from 23.4 before 23.4R2-S6, * from 24.2 before 24.2R2-S3, * from 24.4 before 24.4R2, * from 25.2 before 25.2R2. Affected products named by the advisory: MX; EX.
An Incorrect Permission Assignment for Critical Resource vulnerability in the On-Box Anomaly detection framework of Juniper Networks Junos OS Evolved on PTX Series allows an unauthenticated, network-based attacker to execute code as root. The On-Box Anomaly detection framework should only be reachable by other internal processes over the internal routing instance, but not over an externally exposed port. With the ability to access and manipulate the service to execute code as root a remote attacker can take complete control of the device. Please note that this service is enabled by default as no specific configuration is required. This issue affects Junos OS Evolved on PTX Series: * 25.4 versions before 25.4R1-S1-EVO, 25.4R2-EVO. This issue does not affect Junos OS Evolved versions before 25.4R1-EVO. This issue does not affect Junos OS.
An Authentication Bypass Using an Alternate Path or Channel vulnerability in Juniper Networks Session Smart Router may allows a network-based attacker to bypass authentication and take administrative control of the device. This issue affects Session Smart Router: * from 5.6.7 before 5.6.17, * from 6.0 before 6.0.8 (affected from 6.0.8), * from 6.1 before 6.1.12-lts, * from 6.2 before 6.2.8-lts, * from 6.3 before 6.3.3-r2; This issue affects Session Smart Conductor: * from 5.6.7 before 5.6.17, * from 6.0 before 6.0.8 (affected from 6.0.8), * from 6.1 before 6.1.12-lts, * from 6.2 before 6.2.8-lts, * from 6.3 before 6.3.3-r2; This issue affects WAN Assurance Managed Routers: * from 5.6.7 before 5.6.17, * from 6.0 before 6.0.8 (affected from 6.0.8), * from 6.1 before 6.1.12-lts, * from 6.2 before 6.2.8-lts, * from 6.3 before 6.3.3-r2.
An Unchecked Return Value vulnerability in the DNS module of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). If an SRX Series device configured for DNS processing, receives a specifically formatted DNS request flowd will crash and restart, which causes a service interruption until the process has recovered. This issue affects Junos OS on SRX Series: * 23.4 versions before 23.4R2-S5, * 24.2 versions before 24.2R2-S1, * 24.4 versions before 24.4R2. This issue does not affect Junos OS versions before 23.4R1.
A Double Free vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX and MX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). On all SRX and MX Series platforms, when during TCP session establishment a specific sequence of packets is encountered a double free happens. This causes flowd to crash and the respective FPC to restart. This issue affects Junos OS on SRX and MX Series: * all versions before 22.4R3-S7, * 23.2 versions before 23.2R2-S3, * 23.4 versions before 23.4R2-S4, * 24.2 versions before 24.2R2.
An Improper Validation of Syntactic Correctness of Input vulnerability in the Web-Filtering module of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). If an SRX device configured for UTM Web-Filtering receives a specifically malformed SSL packet, this will cause an FPC crash and restart. This issue affects Junos OS on SRX Series: * 23.2 versions from 23.2R2-S2 before 23.2R2-S5, * 23.4 versions from 23.4R2-S1 before 23.4R2-S5, * 24.2 versions before 24.2R2-S2, * 24.4 versions before 24.4R1-S3, 24.4R2. Earlier versions of Junos are also affected, but no fix is available.
An Improper Locking vulnerability in the GTP plugin of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (Dos). If an SRX Series device receives a specifically malformed GPRS Tunnelling Protocol (GTP) Modify Bearer Request message, a lock is acquired and never released. This results in other threads not being able to acquire a lock themselves, causing a watchdog timeout leading to FPC crash and restart. This issue leads to a complete traffic outage until the device has automatically recovered. This issue affects Junos OS on SRX Series: * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S5, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S3, * 24.4 versions before 24.4R2-S2, * 25.2 versions before 25.2R1-S1, 25.2R2.
An Incorrect Initialization of Resource vulnerability in the Internal Device Manager (IDM) of Juniper Networks Junos OS on EX4000 models allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). On EX4000 models with 48 ports (EX4000-48T, EX4000-48P, EX4000-48MP) a high volume of traffic destined to the device will cause an FXPC crash and restart, which leads to a complete service outage until the device has automatically restarted. The following reboot reason can be seen in the output of 'show chassis routing-engine' and as a log message: reason=0x4000002 reason_string=0x4000002:watchdog + panic with core dump This issue affects Junos OS on EX4000-48T, EX4000-48P and EX4000-48MP: * 24.4 versions before 24.4R2, * 25.2 versions before 25.2R1-S2, 25.2R2. This issue does not affect versions before 24.4R1 as the first Junos OS version for the EX4000 models was 24.4R1.
A Use After Free vulnerability was identified in the 802.1X authentication daemon (dot1xd) of Juniper Networks Junos OS and Junos OS Evolved that could allow an authenticated, network-adjacent attacker flapping a port to crash the dot1xd process, leading to a Denial of Service (DoS), or potentially execute arbitrary code within the context of the process running as root. The issue is specific to the processing of a change in authorization (CoA) when a port bounce occurs. A pointer is freed but was then referenced later in the same code path. Successful exploitation is outside the attacker's direct control due to the specific timing of the two events required to execute the vulnerable code path. This issue affects systems with 802.1X authentication port-based network access control (PNAC) enabled. This issue affects: Junos OS: * from 23.2R2-S1 before 23.2R2-S5, * from 23.4R2 before 23.4R2-S6, * from 24.2 before 24.2R2-S3, * from 24.4 before 24.4R2-S1, * from 25.2 before 25.2R1-S2, 25.2R2; Junos OS Evolved: * from 23.2R2-S1 before 23.2R2-S5-EVO, * from 23.4R2 before 23.4R2-S6-EVO, * from 24.2 before 24.2R2-S3-EVO, * from 24.4 before 24.4R2-S1-EVO, * from 25.2 before 25.2R1-S2-EVO, 25.2R2-EVO.
An Improper Handling of Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated network-based attacker sending a specific ICMP packet through a GRE tunnel to cause the PFE to crash and restart. When PowerMode IPsec (PMI) and GRE performance acceleration are enabled and the device receives a specific ICMP packet, a crash occurs in the SRX PFE, resulting in traffic loss. PMI is enabled by default, and GRE performance acceleration can be enabled by running the configuration command shown below. PMI is a mode of operation that provides IPsec performance improvements using Vector Packet Processing. Note that PMI with GRE performance acceleration is only supported on specific SRX platforms. This issue affects Junos OS on the SRX Series: * all versions before 21.4R3-S12, * from 22.4 before 22.4R3-S8, * from 23.2 before 23.2R2-S5, * from 23.4 before 23.4R2-S5, * from 24.2 before 24.2R2-S3, * from 24.4 before 24.4R2-S1, * from 25.2 before 25.2R1-S1, 25.2R2.
A Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in the SIP application layer gateway (ALG) of Juniper Networks Junos OS on SRX Series and MX Series with MX-SPC3 or MS-MPC allows an unauthenticated network-based attacker sending specific SIP messages over TCP to crash the flow management process, leading to a Denial of Service (DoS). On SRX Series, and MX Series with MX-SPC3 or MS-MPC service cards, receipt of multiple SIP messages causes the SIP headers to be parsed incorrectly, eventually causing a continuous loop and leading to a watchdog timer expiration, crashing the flowd process on SRX Series and MX Series with MX-SPC3, or mspmand process on MX Series with MS-MPC. This issue only occurs over TCP. SIP messages sent over UDP cannot trigger this issue. This issue affects Junos OS on SRX Series and MX Series with MX-SPC3 and MS-MPC: * all versions before 21.2R3-S10, * from 21.4 before 21.4R3-S12, * from 22.4 before 22.4R3-S8, * from 23.2 before 23.2R2-S5, * from 23.4 before 23.4R2-S6, * from 24.2 before 24.2R2-S3, * from 24.4 before 24.4R2-S1, * from 25.2 before 25.2R1-S1, 25.2R2.
A Buffer Over-read vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). When an affected device receives a BGP update with a set of specific optional transitive attributes over an established peering session, rpd will crash and restart when attempting to advertise the received information to another peer. This issue can only happen if one or both of the BGP peers of the receiving session are non-4-byte-AS capable as determined from the advertised capabilities during BGP session establishment. Junos OS and Junos OS Evolved default behavior is 4-byte-AS capable unless this has been specifically disabled by configuring: [ protocols bgp ... disable-4byte-as ] Established BGP sessions can be checked by executing: show bgp neighbor <IP address> | match "4 byte AS" This issue affects: Junos OS: * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S5, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S2, * 24.4 versions before 24.4R2; Junos OS Evolved: * all versions before 22.4R3-S8-EVO, * 23.2 versions before 23.2R2-S5-EVO, * 23.4 versions before 23.4R2-S6-EVO, * 24.2 versions before 24.2R2-S2-EVO, * 24.4 versions before 24.4R2-EVO.