Red Hat Linux Linux Kernel Vulnerabilities & Security Advisories
2149 advisories tracked · Red Hat Security Data API · 1 listed in the CISA Known Exploited Vulnerabilities catalog
Every row below is a published Red Hat Linux advisory that VulniPulse classified as Linux Kernel, with the CVEs, affected and fixed releases and exploitation status the vendor stated. Severity mix: 781 high, 1365 medium, 1 low.
Android app · Google Play
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 32 official vendor sources and 160+ reviewed platform categories.
Source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat Linux Kernel advisories
High [CVE-2026-64247] Denial of Service due to out-of-bounds read
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: hyper-v: Bound the bank index when querying sparse banks When checking if a VP ID is included in a sparse bank set, explicitly check that the ID can actually be contained in a sparse bank (the TLFS allows for a maximum of 64 banks of 64 vCPUs each). When handling a paravirtual TLB flush for L2, the VP ID is copied verbatim from the enlightened VMCS, without any bounds check, i.e. isn't guaranteed to be under the limit of 4096. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
High [CVE-2026-64217] Linux kernel netfs: Memory corruption leading to denial of service and potential privilege escalation
In the Linux kernel, the following vulnerability has been resolved: netfs: Fix overrun check in netfs_extract_user_iter() Fix netfs_extract_user_iter() so that if iov_iter_extract_pages() overfills pages[], then those pages don't get included in the iterator constructed at the end of the function. If there was an overfill, memory corruption has already happened. A local user can exploit this vulnerability by performing specific file I/O operations on a netfs-backed mount, leading to an overrun in the `netfs_extract_user_iter()` function. This memory corruption can cause a kernel crash, resulting in a Denial of Service (DoS). In some cases, it may also lead to privilege escalation by allowing unauthorized access to sensitive kernel memory. Red Hat severity: Important — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-787. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
High [CVE-2026-64251] Linux kernel: Use-after-free in pwrseq_debugfs_seq_next can lead to denial of service
In the Linux kernel, the following vulnerability has been resolved: pwrseq: core: fix use-after-free in pwrseq_debugfs_seq_next() pwrseq_debugfs_seq_next() declares 'next' with __free(put_device), which causes put_device() to be called on the returned pointer when the variable goes out of scope. This results in a use-after-free since the seq_file framework receives a pointer whose reference has already been dropped. Simply removing __free(put_device) would fix the UAF but would leak the reference acquired by bus_find_next_device(), as stop() only calls up_read(&pwrseq_sem) and never releases the device reference. Fix this by making the reference counting consistent across all seq_file callbacks, matching the standard pattern used by PCI and SCSI: - start(): use get_device() so it returns a referenced pointer. - next(): explicitly put_device(curr) to release the previous device's reference (no NULL check needed - the seq_file framework only calls next() while the previous return was non-NULL). - stop(): put_device(data) to release the last iterated device's reference, with a NULL guard since stop() may be called with NULL when start() returned NULL or next() reached end-of-sequence. A local attacker with access to the debugfs interface could exploit a use-after-free vulnerability in the `pwrseq_debugfs_seq_next()` function.
High [CVE-2026-64208] crypto/krb5, rxrpc: Fix lack of pre-decrypt/pre-verify length checks
In the Linux kernel, the following vulnerability has been resolved: crypto/krb5, rxrpc: Fix lack of pre-decrypt/pre-verify length checks Change the krb5 crypto library to provide facilities to precheck the length of the message about to be decrypted or verified. Fix AF_RXRPC to make use of this to validate DATA packets secured with RxGK. This vulnerability arises from a lack of proper length checks before decrypting or verifying incoming messages. A remote attacker could exploit this by sending specially crafted messages, leading to a Denial of Service (DoS) condition where the system becomes unavailable. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-120. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
High [CVE-2026-64216] netfs Use-After-Free vulnerability allows local denial of service and memory corruption
In the Linux kernel, the following vulnerability has been resolved: netfs: Fix potential UAF in netfs_unlock_abandoned_read_pages() netfs_unlock_abandoned_read_pages(rreq) accesses the index of the folios it is wanting to unlock and compares that to rreq->no_unlock_folio so that it doesn't unlock a folio being read for netfs_perform_write() or netfs_write_begin(). However, given that netfs_unlock_abandoned_read_pages() is called _after_ NETFS_RREQ_IN_PROGRESS is cleared, the one folio that it's not allowed to dereference is the one specified by ->no_unlock_folio as ownership immediately reverts to the caller. Fix this by storing the folio pointer instead and using that rather than the index. Also fix netfs_unlock_read_folio() where the same applies. A local user, by interacting with a mounted `netfs` filesystem, could trigger a Use-After-Free (UAF) vulnerability. This flaw occurs when the system attempts to unlock abandoned read pages, potentially leading to a kernel crash and a denial of service. In some cases, this could also result in memory corruption, allowing for information disclosure or data manipulation. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE.
High [CVE-2026-64191] Reject I2C block transfers with invalid length
In the Linux kernel, the following vulnerability has been resolved: i2c: stub: Reject I2C block transfers with invalid length The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0] as the transfer length. The existing check only clamps it to avoid overrunning the chip->words[256] register array, but does not validate it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union i2c_smbus_data.block buffer (34 bytes total). The driver is a development/test tool (CONFIG_I2C_STUB=m, not built by default) that must be loaded with a chip_addr= parameter. Affected products named by the advisory: Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 7; and 1 more.
High [CVE-2026-64192] Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized
In the Linux kernel, the following vulnerability has been resolved: bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized When CONFIG_BPF_LSM=y is set, BPF inode storage maps (BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However, if the BPF LSM is not explicitly enabled at boot time (e.g. omitted from the "lsm=" boot parameter), lsm_prepare() is never executed for the BPF LSM. Consequently, the BPF inode security blob offset (bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at its default compiled size of 8 bytes instead of being updated to a valid offset past the reserved struct rcu_head (typically 16 bytes or more). When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE map, bpf_inode() evaluates inode->i_security + 8. This erroneously aliases the struct rcu_head.func callback pointer at the beginning of the inode->i_security blob. During subsequent map element cleanup or inode destruction, writing NULL to owner_storage clears the queued RCU callback pointer. When rcu_do_batch() later executes the queued callback, it attempts an instruction fetch at address 0x0, triggering an immediate kernel panic. Fix this by introducing a global bpf_lsm_initialized boolean flag marked with __ro_after_init. Set this flag to true inside bpf_lsm_init() when the LSM framework successfully registers the BPF LSM.
High [CVE-2026-64189] fix race between dump and ip_set_list resize
In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix race between dump and ip_set_list resize The release path of ip_set_dump_do() and ip_set_dump_done() read inst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw() of the array pointer. These run from netlink_recvmsg() without the nfnl mutex and without an RCU read-side critical section. A concurrent ip_set_create() can grow the array: it publishes the new array, calls synchronize_net() and then kvfree()s the old one. Since the dump paths read the array outside any RCU reader, synchronize_net() does not wait for them and the old array can be freed while they still index into it, causing a use-after-free. The dumped set itself stays pinned via set->ref_netlink, so only the array load needs protecting. Take rcu_read_lock() around it, matching ip_set_get_byname() and __ip_set_put_byindex(). BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) Read of size 8 at addr ffff88800b5c4018 by task exploit/150 Call Trace:... kasan_report (mm/kasan/report.c:595) ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) netlink_dump (net/netlink/af_netlink.c:2325) netlink_recvmsg (net/netlink/af_netlink.c:1976) sock_recvmsg (net/socket.c:1159) __sys_recvfrom (net/socket.c:2315)...
High [CVE-2026-64098] use uninterruptible resv lock for plane updates
In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use uninterruptible resv lock for plane updates virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and ignore its return value. The function can fail with -EINTR from dma_resv_lock_interruptible() (signal during lock wait) or with -ENOMEM from dma_resv_reserve_fences() (fence slot allocation), leaving the resv lock not held. The queue path then walks the object array and calls dma_resv_add_fence(), which requires the lock held; with lockdep enabled this trips dma_resv_assert_held(): WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840 Call Trace: virtio_gpu_array_add_fence virtio_gpu_queue_ctrl_sgs virtio_gpu_queue_fenced_ctrl_buffer virtio_gpu_cursor_plane_update drm_atomic_helper_commit_planes drm_atomic_helper_commit_tail commit_tail drm_atomic_helper_commit drm_atomic_commit drm_atomic_helper_update_plane __setplane_atomic drm_mode_cursor_universal drm_mode_cursor_common drm_mode_cursor_ioctl drm_ioctl __x64_sys_ioctl Beyond the WARN, mutating the dma_resv fence list without the lock races with concurrent readers/writers and can corrupt the list. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
High [CVE-2026-64069] Fix cancellation of a DIO and single read subrequests
In the Linux kernel, the following vulnerability has been resolved: netfs: Fix cancellation of a DIO and single read subrequests When the preparation of a new subrequest for a read fails, if the subrequest has already been added to the stream->subrequests list, it can't simply be put and abandoned as the collector may see it. Also, if it hasn't been queued yet, it has two outstanding refs that both need to be put. Both DIO read and single-read dispatch fail at this; further, both differ in the order they do things to the way buffered read works. Fix cancellation of both DIO-read and single-read subrequests that failed preparation by the following steps: (1) Harmonise all three reads (buffered, dio, single) to queue the subreq before prepping it. (2) Make all three call netfs_queue_read() to do the queuing. (3) Set NETFS_RREQ_ALL_QUEUED independently of the queuing as we don't know the length of the subreq at this point. (4) In all cases, set the error and NETFS_SREQ_FAILED flag on the subreq and then call netfs_read_subreq_terminated() to deal with it. This will pass responsibility off to the collector for dealing with it. This can lead to resource leaks or unexpected behavior, potentially impacting system stability. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10.
High [CVE-2026-64176] fix driver-set TX rates on old devices
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix driver-set TX rates on old devices On old devices such as 7265D, rates are still encoded in version 1 format, which doesn't use the CCK/OFDM rate index (0-3/0-7) but rather their PLCP value (e.g. 10 for 1 Mbps CCK rate.) While introducing v3 rates, I changed the driver from internally handling v1 rates and converting to v2, to internally handling v3 and converting to v1 or v2 according to the firmware. I accordingly changed the code in iwl_mvm_mac80211_idx_to_hwrate() to no longer have different values for different APIs. This was correct. However, I later reverted this part of the change, because it was reported that I had broken beacon rates, causing a FW assert/crash. This caused TX_CMD rates to be set incorrectly, potentially causing a warning when reported back from the device as having been used. Fix this (hopefully correctly now) by handling beacon rates in the TX_CMD that's embedded in the beacon template command separately. Restore iwl_mvm_mac80211_idx_to_hwrate() to return only the rate index, not PLCP value, fixing the real TX_CMD. A flaw was found in the Linux kernel's iwlwifi driver, affecting older Intel wireless devices. This vulnerability arises from incorrect handling of transmit (TX) rates, specifically when the driver attempts to set these rates.
High [CVE-2026-64152] Handle unmap error when iommu_debug is enabled
In the Linux kernel, the following vulnerability has been resolved: iommu: Handle unmap error when iommu_debug is enabled Sashiko noticed a latent bug where the map error flow called iommu_unmap() which calls iommu_debug_unmap_begin()/iommu_debug_unmap_end() however since this is an error path the map flow never actually established the original iommu_debug_map() it will malfunction. Lift the unmap error handling into iommu_map_nosync() and reorder it so the trace_map()/iommu_debug_map() records the partial mapping and then immediately unmaps it. This avoid creating the unbalanced tracking and provides saner tracing instead of a unmap unmatched to any map. A flaw was found in the Linux kernel's Input/Output Memory Management Unit (IOMMU) subsystem when `iommu_debug` is enabled. This issue occurs because an error handling path attempts to unmap memory without a proper initial mapping, leading to an inconsistent state within the IOMMU's debugging and tracing mechanisms. This malfunction could result in unbalanced tracking, potentially affecting system stability or the accuracy of IOMMU debugging information. Red Hat severity: Moderate — CVSS 7.1 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H). Weakness: CWE-832. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE.
High [CVE-2026-64174] advance loop vars in cfg80211_merge_profile
In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: advance loop vars in cfg80211_merge_profile() cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSS profile that has been split across multiple consecutive MBSSID elements. Its while-loop calls cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, sub_elem) but never advances mbssid_elem or sub_elem inside the body. Each iteration therefore searches for a continuation that follows the same fixed pair; the helper returns the same next_mbssid; and the same next_sub bytes are memcpy()'d into merged_ie at a growing offset until the buffer fills. Advance both mbssid_elem and sub_elem to the just-consumed continuation so the next call to cfg80211_get_profile_continuation() searches for a further continuation beyond it (or returns NULL when none exists). A specially-crafted malicious beacon can take advantage of this bug to cause the kernel to spend an excessive amount of time in cfg80211_merge_profile (up to as much as 2ms per beacon received), which could theoretically be abused in some way. A remote attacker, by sending a specially-crafted malicious Wi-Fi beacon, could exploit a vulnerability in the cfg80211_merge_profile() function. This flaw causes the kernel to spend an excessive amount of processing time, leading to a Denial of Service (DoS) condition.
High [CVE-2026-64061] Fix early put of sink folio in netfs_read_gaps
In the Linux kernel, the following vulnerability has been resolved: netfs: Fix early put of sink folio in netfs_read_gaps() Fix netfs_read_gaps() to release the sink page it uses after waiting for the request to complete. The way the sink page is used is that an ITER_BVEC-class iterator is created that has the gaps from the target folio at either end, but has the sink page tiled over the middle so that a single read op can fill in both gaps. The bug was found by KASAN detecting a UAF on the generic/075 xfstest in the cifsd kernel thread that handles reception of data from the TCP socket: BUG: KASAN: use-after-free in _copy_to_iter+0x48a/0xa20 Write of size 885 at addr ffff888107f92000 by task cifsd/1285 CPU: 2 UID: 0 PID: 1285 Comm: cifsd Not tainted 7.0.0 #6 PREEMPT(lazy) Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x17f/0x4f1 kasan_report+0x100/0x1e0 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x3c/0x60 _copy_to_iter+0x48a/0xa20 __skb_datagram_iter+0x2c9/0x430 skb_copy_datagram_iter+0x6e/0x160 tcp_recvmsg_locked+0xce0/0x1130 tcp_recvmsg+0xeb/0x300 inet_recvmsg+0xcf/0x3a0 sock_recvmsg+0xea/0x100 cifs_readv_from_socket+0x3a6/0x4d0 [cifs] cifs_read_iter_from_socket+0xdd/0x130 [cifs] cifs_readv_receive+0xaad/0xb10 [cifs] cifs_demultiplex_thread+0x1148/0x1740 [cifs] kthread+0x1cf/0x210 A flaw was found in the Linux kernel's network file system (netfs).
High [CVE-2026-64048] reject CHID-0 ACCEPT that matches an empty ism_dev slot
In the Linux kernel, the following vulnerability has been resolved: net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slot On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt() populates V2 entries starting at index 1, so when no V1 device is selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] == NULL and ism_chid[0] == 0. smc_v2_determine_accepted_chid() then matches the peer's CHID against the array starting from index 0 using the CHID alone. A malicious peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches the empty slot, ini->ism_selected becomes 0, and the subsequent ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at offsetof(struct smcd_dev, lgr_lock) == 0x68: BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0 Write of size 4 at addr 0000000000000068 by task exploit/144 Call Trace: _raw_spin_lock_bh smc_conn_create (net/smc/smc_core.c:1997) __smc_connect (net/smc/af_smc.c:1447) smc_connect (net/smc/af_smc.c:1720) __sys_connect __x64_sys_connect do_syscall_64 Require ism_dev[i] to be non-NULL before accepting a CHID match. A flaw was found in the Linux kernel's Server-Message-Block Direct (SMC-D) client. A remote attacker can exploit this vulnerability by sending a specially crafted SMC-Dv2 proposal with a Channel Identifier (CHID) of 0.
High [CVE-2026-64115] fix UAF when peer resets connection during handshake
In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: fix UAF when peer resets connection during handshake vmci_transport_recv_connecting_server() returned err = 0 for a peer RST in its default switch arm: err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST? 0: -EINVAL; That made vmci_transport_recv_listen() skip vsock_remove_pending(), leaving the pending socket on the listener's pending_links with sk_state = TCP_CLOSE while destroy: still dropped the explicit reference taken before schedule_delayed_work(). One second later vsock_pending_work() observed is_pending=true and performed full cleanup: vsock_remove_pending() then the two trailing sock_put(sk) calls -- the first reached refcount 0 and __sk_freed the socket, and the second wrote into the freed object: BUG: KASAN: slab-use-after-free in refcount_warn_saturate Write of size 4 at addr ffff88800b1cac80 by task kworker Workqueue: events vsock_pending_work Treat peer RST like any other unexpected packet type (err = -EINVAL). All destroy: arms now return err 0/100 patched. A remote attacker could exploit a Use-After-Free (UAF) vulnerability when a peer resets a connection during the handshake process. This occurs because the system incorrectly handles…
High [CVE-2026-64175] stop TX during firmware restart
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: stop TX during firmware restart When iwlwifi firmware crashes (e.g., NMI_INTERRUPT_UNKNOWN on Intel BE201/Wi-Fi 7), iwl_mld_nic_error() sets mld->fw_status.in_hw_restart to true. However, iwl_mld_tx_from_txq() does not check this flag before dequeuing frames from mac80211 and pushing them to the transport layer. Since the firmware is dead, iwl_trans_tx() returns -EIO for each frame, which then gets freed immediately. Under high-throughput conditions (e.g., Tailscale UDP traffic or active SSH sessions), this creates a tight dequeue-send-fail-free loop that wastes CPU cycles and generates rapid skb allocation churn, leading to memory pressure from slab fragmentation. The RX path already has this guard (iwl_mld_rx_mpdu checks in_hw_restart at rx.c:1906), and so does the TXQ allocation worker (iwl_mld_add_txqs_wk at tx.c:156). Add the same guard to iwl_mld_tx_from_txq() to stop all TX during firmware restart. Frames left in mac80211's TXQs are naturally drained after restart completes, when queue reallocation triggers iwl_mld_tx_from_txq() via iwl_mld_add_txq_list(), or when new upper-layer traffic invokes wake_tx_queue. Tested on ASUS Zenbook 14 UX3405CA with Intel BE201 (Wi-Fi 7) on kernel 6.19.5 where the firmware crashes approximately every 10-15 minutes under Tailscale traffic.
High [CVE-2026-64119] use list_del_rcu in l2tp_session_unhash
In the Linux kernel, the following vulnerability has been resolved: l2tp: use list_del_rcu in l2tp_session_unhash An unprivileged local user can pin a host CPU indefinitely in l2tp_session_get_by_ifname() by issuing L2TP_CMD_SESSION_GET on L2TP_ATTR_IFNAME concurrently with L2TP_CMD_SESSION_CREATE and L2TP_CMD_SESSION_DELETE on the same tunnel. All three commands take GENL_UNS_ADMIN_PERM, so CAP_NET_ADMIN in the netns user namespace suffices; on any host that has l2tp_core loaded the trigger is reachable from a standard `unshare -Urn` sandbox. l2tp_session_unhash() removes a session from tunnel->session_list with list_del_init(), but that list is walked by l2tp_session_get_by_ifname() with list_for_each_entry_rcu() under rcu_read_lock_bh(). list_del_init() leaves the deleted entry's next/prev self-pointing; a reader that has loaded the entry and then advances pos->list.next reads &session->list, container_of()s back to the same session, and list_for_each_entry_rcu() never reaches the list head. The CPU stays in strcmp() inside the walker, with BH and preemption disabled, so RCU grace periods on the host stall behind it and the wedged thread cannot be killed (SIGKILL is delivered on syscall return). Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat package: kernel.
High [CVE-2026-64041] fix possible buffer overflow
In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: fs210x: fix possible buffer overflow In fs210x_effect_scene_info(), a string was copied like this: strscpy(DST, SRC, strlen(SRC) + 1); A buffer overflow would happen if strlen(SRC) >= sizeof(DST). Actually, strscpy() must be used this way: strscpy(DST, SRC, sizeof(DST)); strscpy(DST, SRC); // defaults to sizeof(DST) An incorrect use of the `strscpy` function in `fs210x_effect_scene_info()` can lead to a buffer overflow. This occurs when a string is copied without proper size validation, potentially allowing a local attacker to cause a denial of service or information disclosure. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-120. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
High [CVE-2026-64071] fix use-after-free in nvme_free_host_mem
In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix use-after-free in nvme_free_host_mem() nvme_free_host_mem() frees dev->hmb_sgt via dma_free_noncontiguous() but never clears the pointer afterward. This leads to a use-after-free if nvme_free_host_mem() is called twice in the same error path. This is reproducible on Thunderbolt-attached NVMe devices (e.g., OWC Envoy Express behind a Dell WD22TB4 dock) where the device intermittently returns I/O errors during HMB setup due to PCIe link instability. BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:iommu_dma_free_noncontiguous+0x22/0x80 Call Trace: dma_free_noncontiguous+0x3b/0x130 nvme_free_host_mem+0x30/0xf0 [nvme] nvme_probe.cold+0xcc/0x275 [nvme] local_pci_probe+0x43/0xa0 pci_device_probe+0xeea/0x290 really_probe+0xf9/0x3b0 __driver_probe_device+0x8b/0x170 driver_probe_device+0x24/0xd0 __driver_attach_async_helper+0x6b/0x110 async_run_entry_fn+0x37/0x170 process_one_work+0x1ac/0x3d0 worker_thread+0x1b8/0x360 kthread+0xf7/0x130 ret_from_fork+0x2d8/0x3a0 ret_from_fork_asm+0x1a/0x30 Fix this by setting dev->hmb_sgt to NULL after freeing it, so the second call takes the multi-descriptor path which safely handles the already-cleaned-up state. A flaw was found in the Linux kernel's NVMe over PCI Express (NVMe-PCIe) driver.