Red Hat Linux Linux Kernel Vulnerabilities & Security Advisories
2147 advisories tracked · Red Hat Security Data API · 1 listed in the CISA Known Exploited Vulnerabilities catalog
Every row below is a published Red Hat Linux advisory that VulniPulse classified as Linux Kernel, with the CVEs, affected and fixed releases and exploitation status the vendor stated. Severity mix: 780 high, 1364 medium, 1 low.
Android app · Google Play
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 32 official vendor sources and 160+ reviewed platform categories.
Source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat Linux Kernel advisories
Medium [CVE-2026-68234] fix bo->pin leaking in amdgpu_bo_create_reserved
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix bo->pin leaking in amdgpu_bo_create_reserved amdgpu_bo_create_reserved() only allocates a new BO when *bo_ptr (struct amdgpu_bo **bo_ptr as input parameter) is NULL, it simply skips creation when *bo_ptr is non-NULL. But it unconditionally reserves, pins, gart allocates and maps the BO afterwards. When the same non-NULL BO pointer is passed in again, for example firmware buffers that live in adev and are re-loaded on every resume / cp_resume / start under AMDGPU_FW_LOAD_DIRECT, amdgpu_bo_pin() just increases pin_count unconditionally, however the matching teardown only unpins once, so pin_count never drops to zero, so TTM is not able to move, swap or evict a BO, causing BO leaks. This commit fixes this issue by only pinning the bo once at creation, and repeated calls no longer take additional pin references. (cherry picked from commit 3ddc0ae76202c447b6aec61e907b852bc94671cf) The `amdgpu_bo_create_reserved` function unconditionally increments a pin counter for a Buffer Object (BO) even if it is already pinned. This occurs when the function is called multiple times with the same BO, such as during firmware buffer re-loading. As a result, the pin count never drops to zero, preventing the Translation Table Manager (TTM) from properly managing memory.
Medium [CVE-2026-68420] reject optional IPTFS templates in outbound policies
In the Linux kernel, the following vulnerability has been resolved: xfrm: reject optional IPTFS templates in outbound policies syzbot reported a stack-out-of-bounds read in xfrm_state_find() which flows from xfrm_tmpl_resolve_one(). Commit 3d776e31c841 ("xfrm: Reject optional tunnel/BEET mode templates in outbound policies") disallowed optional tunnel and BEET in outbound policies to prevent this. Later when IPTFS added, it was not covered by that fix and can still trigger the out-of-bounds read; Extend the check to disallow optional IPTFS in outbound policies as well. IPTFS should be identical to tunnel mode. IN and FWD policies are not affected: xfrm_tmpl_resolve_one() is only reachable via the outbound path. Affected products named by the advisory: Red Hat Enterprise Linux 6; Red Hat package: kernel.
Medium [CVE-2026-68336] fix devconf_all NULL dereference when IPv6 is disabled
In the Linux kernel, the following vulnerability has been resolved: bonding: fix devconf_all NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the devconf_all is never initialized because inet6_init() exits before addrconf_init() is called which initializes it. bond_send_validate(), however, will still call bond_ns_send_all() even ipv6 is indeed disabled. It will lead to NULL derefence of net->ipv6.devconf_all in ip6_pol_route(). BUG: kernel NULL pointer dereference, address: 000000000000000c [...] Workqueue: bond0 bond_arp_monitor [bonding] RIP: 0010:ip6_pol_route+0x69/0x480 [...] Call Trace:? srso_return_thunk+0x5/0x5f? __pfx_ip6_pol_route_output+0x10/0x10 fib6_rule_lookup+0xfe/0x260? wakeup_preempt+0x8a/0x90? srso_return_thunk+0x5/0x5f? srso_return_thunk+0x5/0x5f? sched_balance_rq+0x369/0x810 ip6_route_output_flags+0xd7/0x170 bond_ns_send_all+0xde/0x280 [bonding] bond_ab_arp_probe+0x296/0x320 [bonding]? srso_return_thunk+0x5/0x5f bond_activebackup_arp_mon+0xb4/0x2c0 [bonding] process_one_work+0x196/0x370 worker_thread+0x1af/0x320? srso_return_thunk+0x5/0x5f? __pfx_worker_thread+0x10/0x10 kthread+0xe3/0x120? __pfx_kthread+0x10/0x10 ret_from_fork+0x199/0x260? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Fix this by adding ipv6_mod_enabled() condition check in the caller.
Medium [CVE-2026-68403] initialize SDIO data work before cleanup
In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: initialize SDIO data work before cleanup brcmf_sdio_probe() stores the newly allocated bus in sdiodev->bus before allocating the ordered workqueue. If that allocation fails, the function jumps to fail and calls brcmf_sdio_remove(). brcmf_sdio_remove() unconditionally cancels bus->datawork. Initialize the work item before the first failure path that can reach brcmf_sdio_remove(), so the cleanup path always observes a valid work object. This issue was found by our static analysis tool and then confirmed by manual review of the probe error path and the remove-time work drain. The problem pattern is an early setup failure that reaches a cleanup helper which cancels an embedded work item before its initializer has run. A QEMU PoC forced alloc_ordered_workqueue() to fail at the same point in brcmf_sdio_probe(), before INIT_WORK(&bus->datawork) is reached. The resulting fail path calls brcmf_sdio_remove(), and DEBUG_OBJECTS reports the invalid work drain with brcmf_sdio_probe() and brcmf_sdio_remove() in the stack. During the driver's initialization and cleanup process, an uninitialized work item could be accessed and cancelled. This issue occurs if a specific memory allocation fails, leading to an invalid work drain.
Medium [CVE-2026-68301] fix memory leak on slave unregistration by removing synced VLANs
In the Linux kernel, the following vulnerability has been resolved: net: hsr: fix memory leak on slave unregistration by removing synced VLANs When an HSR master device is brought UP, it auto-adds VLAN 0 via vlan_vid0_add(), which propagates VID 0 to its slave devices (slave A and B). If a slave device is later unregistered while HSR is active (e.g., during netns cleanup or interface destruction), hsr_del_port() is called to detach the slave port from the HSR master. However, hsr_del_port() currently does not delete the VLAN IDs that were synced to the slave device by HSR. When the slave device is destroyed, its vlan_info / vlan_vid_info structure remains allocated, leading to a memory leak. Fix this by calling vlan_vids_del_by_dev(port->dev, master->dev) in hsr_del_port() before unlinking slave A or slave B ports, matching the propagation logic in hsr_ndo_vlan_rx_add_vid() / hsr_ndo_vlan_rx_kill_vid() and the cleanup behavior in bonding and team drivers. A flaw was found in the Linux kernel's High-availability Seamless Redundancy (HSR) networking module. When an HSR slave device is unregistered, the system fails to properly remove synced Virtual Local Area Networks (VLANs). This oversight causes the slave device to retain a reference count on these VLANs, leading to a memory leak. A local attacker could potentially exploit this to cause resource exhaustion.
Medium [CVE-2026-68396] wake eh reliably when using scsi_schedule_eh
In the Linux kernel, the following vulnerability has been resolved: scsi: core: wake eh reliably when using scsi_schedule_eh Drivers which use the scsi_schedule_eh function to run the error handler currently risk the error handler thread never waking once all commands are timed out or inactive. There is no enforced memory order between setting the host into error recovery state and counting busy commands. This can result in a race with scsi_dec_host_busy where neither CPU sees both conditions of all commands inactive and the host error state to request waking the error handler. To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will occur after the error state is globally visible and will be seen by any current scsi_dec_host_busy callers. As a result, the system may experience a denial of service due to the failure of the error handler to properly manage SCSI device errors. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-366. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE.
Medium [CVE-2026-68277] fix OOB reads on 2-byte fields in sideband reply parsers
In the Linux kernel, the following vulnerability has been resolved: drm/dp/mst: fix OOB reads on 2-byte fields in sideband reply parsers Three sideband reply parsers read 16-bit fields as: val = (raw->msg[idx] msg[idx+1]); and check bounds only after the fact. When idx == raw->curlen, raw->msg[idx+1] reads one byte past the received message data into the following struct fields (curchunk_len, curchunk_idx, curlen). Affected functions: - drm_dp_sideband_parse_enum_path_resources_ack() full_payload_bw_number and avail_payload_bw_number fields - drm_dp_sideband_parse_allocate_payload_ack() allocated_pbn field - drm_dp_sideband_parse_query_payload_ack() allocated_pbn field Fix by using a single combined check (idx + 2 > curlen) before each 2-byte read. Since the check is strictly tighter than idx > curlen, no separate step is needed. [added fixes tag] A flaw was found in the Linux kernel's `drm/dp/mst` (Direct Rendering Manager/DisplayPort/Multi-Stream Transport) sideband reply parsers. This out-of-bounds read vulnerability occurs when processing 2-byte fields in sideband replies, where the system attempts to read beyond the allocated buffer. A local attacker could potentially exploit this to read sensitive information from adjacent memory locations, leading to information disclosure.
Medium [CVE-2026-68312] fix cifsFileInfo leak on kmalloc failure in deferred close drain paths
In the Linux kernel, the following vulnerability has been resolved: cifs: fix cifsFileInfo leak on kmalloc failure in deferred close drain paths In cifs_close_deferred_file(), cifs_close_all_deferred_files(), and cifs_close_deferred_file_under_dentry(), when a pending deferred close is cancelled via cancel_delayed_work(), the subsequent kmalloc_obj() to add the file to the local processing list may fail under memory pressure. The loop breaks immediately, but the cancelled work is no longer pending (it would have called _cifsFileInfo_put()), and the cfile is never added to file_head for processing. The cifsFileInfo reference and the open server handle both leak. Fix by saving the cfile that failed allocation in a local variable, breaking as before, and calling _cifsFileInfo_put() on it after releasing the lock. Any files later in the iteration are unaffected since their deferred work is still pending and will fire normally. A flaw was found in the Linux kernel's Common Internet File System (CIFS) implementation. This resource leak could potentially lead to a Denial of Service (DoS) over time due to resource exhaustion. This issue affects CIFS/SMB client mounts. Systems not mounting CIFS shares are not affected. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-911.
Medium [CVE-2026-68116] Fix source list corruption on a failed replace
In the Linux kernel, the following vulnerability has been resolved: vxlan: mdb: Fix source list corruption on a failed replace When replacing the source list of an MDB remote entry, all existing sources are first marked for deletion and vxlan_mdb_remote_srcs_add() is then called to add the new source list. Sources present in the new list have their deletion mark cleared, and any sources left marked afterwards are removed. If vxlan_mdb_remote_srcs_add() fails partway through, its error path deletes all entries on the remote's source list. That rollback is only correct for its other caller, vxlan_mdb_remote_add(), where the remote was just allocated and the list contains solely entries added during the call. On the replace path the list also holds pre-existing sources, so a failed replace tears them down together with their (S, G) forwarding entries instead of leaving the entry unchanged. An EXCLUDE filter that loses sources starts forwarding traffic that should be blocked, while an INCLUDE filter that loses sources drops traffic that should be forwarded. Mark entries created during the current pass with a new VXLAN_SGRP_F_NEW flag. On failure, delete only those entries and clear the deletion mark on the pre-existing ones, so a failed replace leaves the source list untouched. Retain the flag until the whole operation succeeds and then clear it.
Medium [CVE-2026-68221] fix memory leaks in probe and remove
In the Linux kernel, the following vulnerability has been resolved: media: nuvoton: npcm-video: fix memory leaks in probe and remove npcm_video_probe() allocates the npcm_video structure with kzalloc_obj() but never frees it on any probe error path or in npcm_video_remove(), leaking the allocation on every failed probe and every normal unbind. Additionally, when npcm_video_setup_video() fails, the reserved memory association established by of_reserved_mem_device_init() in npcm_video_init() is not released, leaking the rmem_assigned_device entry on the global list. Fix both by adding kfree(video) to all probe error paths and to npcm_video_remove(), and adding the missing of_reserved_mem_device_release() call when npcm_video_setup_video() fails. The `npcm_video_probe()` function allocates memory that is not properly freed on error paths or during device removal, leading to memory leaks. These issues can lead to resource exhaustion, potentially resulting in a Denial of Service (DoS) for the system. This issue affects systems using the Nuvoton NPCM video driver on BMC/embedded platforms. Probe error paths and remove() fail to free npcm_video allocations and reserved memory associations, leaking resources on each failed probe or unbind. Systems without NPCM video hardware are not affected. Red Hat severity: Moderate. Weakness: CWE-772.
Medium [CVE-2026-68133] fix PTP Call Trace during PTP release
In the Linux kernel, the following vulnerability has been resolved: ice: fix PTP Call Trace during PTP release If a PF reset occurs when the PTP state is ICE_PTP_UNINIT, then ice_ptp_rebuild() will update the state to ICE_PTP_ERROR. This will result in the following PTP release call trace during driver unload: kernel BUG at lib/list_debug.c:52! ice_ptp_release+0x332/0x3c0 [ice] ice_deinit_features.part.0+0x10e/0x120 [ice] ice_remove+0x100/0x220 [ice] This was observed when passing PF1 through to a VM. ice_ptp_init() fails because ctrl_pf is NULL and sets the state to ICE_PTP_UNINIT. Fix by detecting the ICE_PTP_UNINIT state in ice_ptp_rebuild() and returning without error, preventing the invalid state transition to ICE_PTP_ERROR. The only valid path to ICE_PTP_ERROR is from ICE_PTP_RESETTING after a failed rebuild. A local attacker, by triggering a Physical Function (PF) reset while the Precision Time Protocol (PTP) state is uninitialized, could cause an invalid state transition. This could lead to a kernel bug and a system crash, resulting in a Denial of Service (DoS). Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-617. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.
Medium [CVE-2026-68251] replace BUG_ON with WARN_ON
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/sdma6.0: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit c17a508a7d652da3728f8bbc481bfffe96d65a87) This vulnerability could lead to a kernel crash, resulting in a Denial of Service (DoS). The issue stems from the use of the `BUG_ON()` macro, which, when triggered, causes the system to halt unexpectedly. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-617. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-68292] prevent tstamp ring allocation for non-PF VSI types
In the Linux kernel, the following vulnerability has been resolved: ice: prevent tstamp ring allocation for non-PF VSI types The pf->txtime_txqs bitmap tracks which Tx queues have ETF (Earliest TxTime First) offload enabled. This bitmap is indexed by queue number and is set by ice_offload_txtime(), which only operates on PF VSI queues. However, ice_is_txtime_ena() does not check the VSI type before consulting the bitmap. When ETF offload is enabled on PF Tx queue 0, bit 0 is set in pf->txtime_txqs. During a subsequent PCI reset rebuild, the CTRL VSI's Tx queue 0 is reconfigured and ice_is_txtime_ena() is called for that ring. This causes ice_vsi_cfg_txq() to spuriously allocate a tstamp_ring for the CTRL VSI ring. Since CTRL VSI rings have no associated netdev, ice_clean_tx_ring() takes an early return at the!netdev check before reaching ice_free_tx_tstamp_ring(), leaking the allocation. Each PCI reset leaks one 64-byte tstamp_ring. Fix this by restricting ice_is_txtime_ena() to return true only for PF VSI rings, since txtime_txqs is only meaningful for PF VSI queues. During a Peripheral Component Interconnect (PCI) reset, the driver incorrectly allocates a timestamp ring due to a faulty check of the Virtual Station Interface (VSI) type. This allocated memory is not properly released, leading to a memory leak.
Medium [CVE-2026-68372] Deattach Type-C connector on component unbind
In the Linux kernel, the following vulnerability has been resolved: usb: core: port: Deattach Type-C connector on component unbind connector_unbind() is the mirror of connector_bind(), but it is missing the symmetric call to typec_deattach() that connector_bind() makes via: if (port_dev->child) typec_attach(port_dev->connector, &port_dev->child->dev); When a Thunderbolt dock is unplugged, two teardown paths race: 1. The component framework calls connector_unbind() first, which sets port_dev->connector = NULL without calling typec_deattach(). This leaves port->usb2_dev/port->usb3_dev in struct typec_port pointing at the USB device that is about to be freed. 2. usb_disconnect() then calls typec_deattach(port_dev->connector,...), but port_dev->connector is already NULL, so the call is a no-op and port->usb2_dev is never cleared. 3. Concurrently, UCSI detects a PD partner-disconnect event and calls typec_unregister_partner(), which reads port->usb2_dev (now a dangling pointer to freed memory) and passes it to typec_partner_unlink_device() -> sysfs_remove_link() -> dev_name() on the freed device, corrupting the typec/UCSI partner state. This corruption leaves the Thunderbolt tunnel in an inconsistent state on the next dock hot-plug. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
Medium [CVE-2026-68107] avoid rereading IB param length
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn4: avoid rereading IB param length Reuse the parameter length returned by vcn_v4_0_enc_find_ib_param() instead of rereading it from the IB. This avoids a potential TOCTOU issue if the IB contents change between reads. (cherry picked from commit dbb02b4755f8c1f3773263f2d779872c1c0c073a) Specifically, within the `drm/amdgpu/vcn4` component, a time-of-check to time-of-use (TOCTOU) vulnerability exists. This occurs because the system re-reads the IB parameter length instead of reusing an already obtained value. This could allow a local attacker to potentially manipulate the IB contents between reads, leading to unexpected behavior or a denial of service. This issue affects AMDGPU systems using VCN 4 video encode. Systems without AMD GPUs are not affected. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-367. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat OpenShift Container Platform 4. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-68259] Check bounds in allocate_event_notification_slot
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check bounds in allocate_event_notification_slot The valid event ids go from 0 to KFD_SIGNAL_EVENT_LIMIT allocate_event_notification_slot has an option to specify an event id to allocate at, used by CRIU. We weren't checking the bounds on that value. Check them. v2: Lower bounds check is unecessary because of idr_alloc already rejecting negative numbers. Upper bounds check should be KFD_SIGNAL_EVENT_LIMIT since the signal mode mappings might not yet exist (cherry picked from commit 6853f1f6cbbeb3f53ebbbd7286536aeb2c5d5f50) A missing bounds check in the `allocate_event_notification_slot` function within the `drm/amdkfd` component allows a local attacker to provide an out-of-bounds event ID. This could lead to memory corruption, potentially resulting in a denial of service or privilege escalation. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-787. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-68189] Protect UUID list traversal
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Protect UUID list traversal The hci_sync conversion moved class-of-device and EIR generation from an HCI request built under hdev->lock to asynchronous command sync work. The worker holds hdev->req_lock, but that lock does not serialize access to hdev->uuids against add_uuid() and remove_uuid(), which update the list under hdev->lock. The following interleaving can therefore occur: CPU0 (command sync work) CPU1 (management socket) fetch uuid from the list list_del(&uuid->list) kfree(uuid) read uuid->size KASAN reports the resulting use-after-free: BUG: KASAN: slab-use-after-free in eir_create+0xb8f/0xee0 Read of size 1 at addr ffff88810dbd8620 by task kworker/u17:0/87 Workqueue: hci0 hci_cmd_sync_work Call Trace: eir_create+0xb8f/0xee0 hci_update_eir_sync+0x1c0/0x330 hci_cmd_sync_work+0x13c/0x290 process_one_work+0x63a/0x1070 worker_thread+0x45b/0xd10 Allocated by task 86: __kasan_kmalloc+0x8f/0xa0 add_uuid+0x18a/0x4b0 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 92: __kasan_slab_free+0x43/0x70 kfree+0x131/0x3c0 remove_uuid+0x25e/0x560 hci_sock_sendmsg+0x1033/0x1ea0 Hold hdev->lock while generating and committing the class-of-device and EIR snapshots. Release it before sending an HCI command, so controller waits do not happen under the device lock.
Medium [CVE-2026-68288] fix info leak in NET_DM_ATTR_PAYLOAD
In the Linux kernel, the following vulnerability has been resolved: net: drop_monitor: fix info leak in NET_DM_ATTR_PAYLOAD net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() open code the NET_DM_ATTR_PAYLOAD attribute to avoid zeroing the packet payload before overwriting it with skb_copy_bits(). skb_put() reserves nla_total_size(payload_len), i.e. the header plus the NLA_ALIGN() padding, but only payload_len bytes are copied in. When payload_len is not a multiple of 4 the 1-3 padding bytes are never initialized and are leaked to user space inside the netlink message. KMSAN confirms the leak for the software path when the packet payload length is not 4-byte aligned: BUG: KMSAN: kernel-infoleak in _copy_to_iter _copy_to_iter __skb_datagram_iter skb_copy_datagram_iter netlink_recvmsg sock_recvmsg __sys_recvfrom Uninit was created at: kmem_cache_alloc_node_noprof __alloc_skb net_dm_packet_work Bytes 173-175 of 176 are uninitialized Use __nla_reserve(), which sets up the attribute header and zeroes the padding, instead of open coding the attribute construction. A local attacker could exploit this to obtain sensitive kernel memory information. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-908.
Medium [CVE-2026-68153] remove debugfs files before client teardown
In the Linux kernel, the following vulnerability has been resolved: libceph: remove debugfs files before client teardown ceph_destroy_client() tears down the monitor client before removing the per-client debugfs files. A concurrent read of the monmap debugfs file can enter monmap_show() after ceph_monc_stop() has freed monc->monmap, triggering a use-after-free. Remove the debugfs files before stopping the OSD and monitor clients. debugfs_remove() drains active handlers and prevents new accesses, so the debugfs callbacks can no longer race the rest of client teardown. During the process of tearing down a client, the monitor client is stopped before its associated debugfs files are removed. This type of flaw can potentially lead to system instability or a denial of service. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-68416] fix double free and WARN_ON in add_mtd_device error paths
In the Linux kernel, the following vulnerability has been resolved: mtd: fix double free and WARN_ON in add_mtd_device() error paths When device_register() or mtd_nvmem_add() fails inside add_mtd_device() for a partition, the error handling triggers mtd_release() via put_device() or device_unregister(). mtd_release() calls release_mtd_partition() which frees the mtd_info structure. However, callers such as mtd_add_partition() and add_mtd_partitions() also call free_partition() in their error paths, resulting in a double free. Additionally, release_mtd_partition() hits WARN_ON(!list_empty( &mtd->part.node)) because the partition node is still linked in the parent's partitions list when the release callback fires from the add_mtd_device() error path. Fix this by overriding dev->type and dev->release before put_device() in the error paths, so that device_release() invokes a no-op function instead of mtd_release(). For the mtd_nvmem_add() failure case, device_unregister() is replaced with device_del() to separate the device removal from the final kobject reference drop, allowing the override to take effect before put_device() is called. The callers' error paths (list_del + free_partition) remain the sole owners of mtd_info lifetime on add_mtd_device() failure, which is the expected contract.