Red Hat Linux Linux Kernel Vulnerabilities & Security Advisories
2148 advisories tracked · Red Hat Security Data API · 1 listed in the CISA Known Exploited Vulnerabilities catalog
Every row below is a published Red Hat Linux advisory that VulniPulse classified as Linux Kernel, with the CVEs, affected and fixed releases and exploitation status the vendor stated. Severity mix: 781 high, 1364 medium, 1 low.
Android app · Google Play
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 32 official vendor sources and 160+ reviewed platform categories.
Source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat Linux Kernel advisories
Medium [CVE-2026-64334] fix hard lockup on disconnect
In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix hard lockup on disconnect If submitting the OOB write urb fails persistently (e.g if the device is being disconnected) the driver would loop indefinitely with interrupts disabled. Check for urb submission errors when sending OOB commands to avoid hanging if, for example, open(), set_termios() or close() races with a physical disconnect. This is issue was flagged by Sashiko when reviewing an unrelated change to the driver. This vulnerability occurs when a USB device using the driver is disconnected, and operations such as opening or closing the device are happening concurrently. Persistent errors in sending out-of-band (OOB) write Universal Serial Bus Request Blocks (URBs) can cause the driver to enter an indefinite loop with interrupts disabled. This leads to a system hard lockup, resulting in a Denial of Service (DoS). Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-835. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-64511] Fix possible NULL pointer dereference
In the Linux kernel, the following vulnerability has been resolved: ACPI: NFIT: core: Fix possible NULL pointer dereference After commit 9b311b7313d6 ("ACPI: NFIT: Install Notify() handler before getting NFIT table"), acpi_nfit_probe() installs an ACPI notify handler for the NFIT device before checking the presence of the NFIT table. If that table is not there, 0 is returned without allocating the acpi_desc object and setting the driver data pointer of the NFIT device. If the platform firmware triggers an NFIT_NOTIFY_UC_MEMORY_ERROR notification on the NFIT device at that point, acpi_nfit_uc_error_notify() will dereference a NULL pointer. Prevent that from occurring by adding an acpi_desc check against NULL to acpi_nfit_uc_error_notify(). This vulnerability allows a local attacker to cause a system crash by triggering a specific notification related to Non-Volatile Memory (NVM) before the NVM table is fully set up. This improper handling of NVM notifications can lead to a critical error, resulting in a denial of service for the affected system. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-476. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-64496] Fix event FIFO reset race
In the Linux kernel, the following vulnerability has been resolved: iio: event: Fix event FIFO reset race `iio_event_getfd()` creates the event file descriptor with `anon_inode_getfd()`, which allocates a new fd, creates the anonymous file and installs it in the process fd table before returning to the caller. The IIO code resets the event FIFO after `anon_inode_getfd()` has returned, but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace. But since fd tables are shared between threads, another thread can guess the newly allocated fd number and issue a `read()` on it as soon as the fd has been installed. This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run in parallel with the `kfifo_reset_out()` in `iio_event_getfd()`. The kfifo documentation says that `kfifo_reset_out()` is only safe when it is called from the reader thread and there is only one concurrent reader. Otherwise it is dangerous and must be handled in the same way as `kfifo_reset()`. If that happens, `kfifo_to_user()` can advance the FIFO `out` index based on state from before the reset, after the reset has already moved the `out` index to the current `in` index. A later `read()` can then see an underflowed FIFO length and copy more data than the event FIFO buffer contains. This can result in an out-of-bounds read and leak adjacent kernel memory to userspace.
Medium [CVE-2026-64357] fix exchmaps reservation limit check
In the Linux kernel, the following vulnerability has been resolved: xfs: fix exchmaps reservation limit check xfs_exchmaps_estimate_overhead() adds the bmbt and rmapbt overhead to a local resblks variable, but the final UINT_MAX check still tests req->resblks. That is the reservation value from before the overhead was added. The computed value is stored back in req->resblks and later passed to xfs_trans_alloc(), whose block reservation argument is unsigned int. Check the computed reservation so the existing limit applies to the value that will be used. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-190. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-64275] elan_i2c - prevent division by zero and arithmetic underflow
In the Linux kernel, the following vulnerability has been resolved: Input: elan_i2c - prevent division by zero and arithmetic underflow The Elan I2C touchpad driver queries the device for its physical dimensions and trace counts to calculate the device resolution and width. However, if the device firmware or device tree provides invalid zero values for x_traces or y_traces, it results in a fatal division-by-zero exception leading to a kernel panic during device probe. Add checks to ensure these parameters are non-zero before performing the division. If invalid trace values are detected, fall back to a safe default of 1. Additionally, prevent an arithmetic underflow in the touch reporting logic. Previously, if the calculated or fallback width was smaller than ETP_FWIDTH_REDUCE (90), the subtraction would underflow, resulting in a massive unsigned integer being reported to userspace. Clamp the adjusted width to a minimum of 0 to safely handle small physical dimensions and fallback scenarios. Completing the probe with safe fallback values ensures the sysfs nodes are created, keeping the firmware update path intact so a recovery firmware can be flashed to the device. This vulnerability occurs when the driver receives invalid zero values for touchpad dimensions from device firmware or the device tree, or when a calculated width is too small.
Medium [CVE-2026-64316] caam - use print_hex_dump_devel to guard key hex dumps
In the Linux kernel, the following vulnerability has been resolved: crypto: caam - use print_hex_dump_devel to guard key hex dumps Use print_hex_dump_devel() for dumping sensitive key material in *_setkey() and gen_split_key() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. This vulnerability allows for information disclosure where sensitive cryptographic key material could be leaked at runtime. This occurs when the `CONFIG_DYNAMIC_DEBUG` option is enabled, due to improper guarding of key dumps in the `*_setkey()` and `gen_split_key()` functions. This could allow a local attacker to gain access to sensitive information. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-64464] fix ring sg table pages leak
In the Linux kernel, the following vulnerability has been resolved: xhci: sideband: fix ring sg table pages leak xhci_ring_to_sgtable() allocates a temporary pages array and uses it to build the returned sg_table with sg_alloc_table_from_pages(). The error paths free the pages array, but the success path returns the sg_table without freeing it. This leaks the temporary array every time a sideband client gets an endpoint or event ring buffer. The returned sg_table has its own scatterlist entries and does not depend on the temporary array after construction. A flaw was found in the Linux kernel's xHCI (eXtensible Host Controller Interface) sideband functionality. A memory leak occurs in the `xhci_ring_to_sgtable()` function because a temporary memory array is not properly released after use. This continuous leakage of memory can lead to system instability and a Denial of Service (DoS) over time, impacting the availability of the system. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-64356] fix memory leak in xfs_dqinode_metadir_create
In the Linux kernel, the following vulnerability has been resolved: xfs: fix memory leak in xfs_dqinode_metadir_create() If xfs_metadir_create() fails in xfs_dqinode_metadir_create(), the current code returns directly, leaking the allocated update and transaction state. If the subsequent commit fails, the caller-owned inode reference is left behind. Fix this memory leak by routing the create failure path through xfs_metadir_cancel(). For both create and commit failures, finish and release any inode returned to the caller, mirroring the unwind pattern in xfs_metadir_mkdir(). The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. Runtime validation used kprobe fault injection during `mount -o uquota` on a metadir XFS image. Injecting xfs_metadir_create() reproduced the old active-update path that left mount stuck later in mount setup; after this change, the same injection reported cancel_hits=1 and irele_hits=1. This vulnerability occurs during the creation of XFS metadata directories, where a failure in the creation process or a subsequent commit can lead to a memory leak.
Medium [CVE-2026-64294] do file ownership checks with the proper mount idmap
In the Linux kernel, the following vulnerability has been resolved: mm: do file ownership checks with the proper mount idmap Ever since idmapped mounts were introduced, inode ownership checks (for side-channel protection) in mincore() and madvise(MADV_PAGEOUT) were done against the nop_mnt_idmap, which completely ignores the file's mount's idmap. This results in odd edgecases like: 1) mount/bind-mount with an idmap userA:userB:1 2) userB runs an owner_or_capable() check on file that is owned by userA on-disk/in-memory, but owned by userB after idmap translation 3) owner_or_capable() mysteriously fails as the correct idmap wasn't supplied In the case of mincore/madvise MADV_PAGEOUT, this is usually benign, because file_permission(file, MAY_WRITE) will probably succeed, as it uses the proper idmap internally, but it does not need to be the case on e.g a 0444 file where even the owner itself doesn't have permissions to write to it. Since this is clearly not trivial to get right, introduce a file_owner_or_capable() that can carry the correct semantics, and switch the various users in mm to it. The issue was found by manual code inspection & an off-list discussion with Jan Kara. A flaw was found in the Linux kernel's memory management subsystem.
Medium [CVE-2026-64423] remove multicast group from hash table on device destruction
In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: remove multicast group from hash table on device destruction When a device is destroyed under RTNL, ip_mc_destroy_dev() iterates through the multicast list and calls ip_ma_put() on each membership, scheduling them for RCU reclamation. However, they are not unlinked from the device's multicast hash table (mc_hash). Since the device remains published in dev->ip_ptr until after ip_mc_destroy_dev() completes, concurrent RCU readers traversing mc_hash can still locate and access the multicast group after its refcount is decremented. If the RCU callback runs and frees the group while a reader is accessing it, a use-after-free occurs. Fix this by unlinking the multicast group from mc_hash using ip_mc_hash_remove() before scheduling it for reclamation. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; and 1 more.
Medium [CVE-2026-64478] avoid kobject path lookup in DualSense match
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: avoid kobject path lookup in DualSense match The DualSense jack-detection input handler verifies that a matching input device belongs to the same physical controller by building kobject path strings for both the input device and the USB audio device, then comparing the path prefix. This was observed when a weak physical connection caused the controller to rapidly disconnect and reconnect. During that repeated hotplug, snd_dualsense_ih_match() can run while the controller's USB device is being disconnected. kobject_get_path() walks ancestor kobjects and dereferences their names; if the USB device kobject name is no longer valid, this can fault in strlen(): RIP: 0010:strlen+0x10/0x30 Call Trace: kobject_get_path+0x34/0x150 snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio] input_register_device+0x566/0x6a0 ps_probe+0xb89/0x1590 [hid_playstation] The same ownership check can be done without building kobject path strings. The input device is parented below the HID device, USB interface and USB device, so walking the input device parent chain and comparing against the mixer USB device preserves the check without dereferencing kobject names during disconnect. This action can cause the kernel to attempt to access an invalid memory location, leading to a system crash and a denial of service.
Medium [CVE-2026-64368] do not limit zeroing to orig_size when only red zoning is enabled
In the Linux kernel, the following vulnerability has been resolved: mm/slab: do not limit zeroing to orig_size when only red zoning is enabled When init (zeroing) on allocation is requested, for kmalloc() we generally have to zero the full object size even if a smaller size is requested, in order to provide krealloc()'s __GFP_ZERO guarantees. But if we track the requested size, krealloc() uses that information to do the right thing, so we can zero only the requested size. With red zoning also enabled, any extra size became part of the red zone, so it must not be zeroed and thus we must zero only the requested size. However the current check is imprecise, and will trigger also when only SLAB_RED_ZONE is enabled without SLAB_STORE_USER (which enables tracking the requested size). This means enabling red zoning alone can compromise krealloc()'s __GFP_ZERO contract. Fix this by using slub_debug_orig_size() instead, which is the exact check for whether the requested size is tracked. We don't need to care if red zoning is also enabled or not. Also update and expand the comment accordingly. A flaw was found in the Linux kernel's memory management subsystem. This issue occurs when the kernel's memory allocator attempts to zero out newly allocated memory, but an incorrect check prevents the full memory region from being cleared under specific configurations.
Medium [CVE-2026-64517] Fix double-free of managed BO in error path
In the Linux kernel, the following vulnerability has been resolved: drm/xe/gsc: Fix double-free of managed BO in error path The error path in xe_gsc_init_post_hwconfig() explicitly frees a BO allocated with xe_managed_bo_create_pin_map() via xe_bo_unpin_map_no_vm(). Since the managed BO already has a devm cleanup action registered, this causes a double-free when devm unwinds during probe failure. Remove the explicit free and let devm handle it, consistent with all other xe_managed_bo_create_pin_map() callers. (cherry picked from commit 71d61e3e299a17139e47f980a4d6f425b2c59bf7) This vulnerability, located in the graphics subsystem (drm/xe/gsc), involves a double-free error during the initialization of a graphics component. An attacker could potentially exploit this memory corruption issue to cause a system crash, leading to a denial of service. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-1341. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-64507] Enable IBPB flush on BPF JIT allocation
In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Enable IBPB flush on BPF JIT allocation Enable hardening against JIT spraying when Spectre-v2 mitigations are in use. Specifically, issue an IBPB flush on BPF JIT memory reuse. Skip enabling the IBPB flush if the BPF dispatcher is already using a retpoline sequence. Guard the enabling under CONFIG_BPF_JIT so that bugs.c still builds with CONFIG_BPF_JIT=n. This vulnerability involves an incomplete defense against Spectre-v2, a type of attack that can expose sensitive information by exploiting how modern processors predict future operations. This could potentially allow an attacker to bypass existing Spectre-v2 protections, leading to the unauthorized disclosure of information. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-515. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-64514] gate must_wait writability check on pte_present
In the Linux kernel, the following vulnerability has been resolved: userfaultfd: gate must_wait writability check on pte_present() userfaultfd_must_wait() and userfaultfd_huge_must_wait() read the PTE without taking the page table lock and then apply pte_write() / huge_pte_write() to it. Those accessors decode bits from the present encoding only; on a swap or migration entry they read the offset bits that happen to share the same position and return an undefined result. The intent of the check is "is this fault still WP-blocked?". A non-marker swap entry means the page is in transit -- the userfault context the original fault delivered against is no longer the same, and the swap-in or migration completion path will re-deliver a fresh fault if userspace still needs to handle it. Worst case under the current code the garbage write bit says "wait", and the thread stays asleep until a UFFDIO_WAKE that may never arrive. Gate the writability check on pte_present() so the lockless re-check only inspects present-PTE bits when the entry is actually present. The non-present, non-marker case returns "don't wait" and lets the fault path retry. This vulnerability occurs when the userfaultfd_must_wait() and userfaultfd_huge_must_wait() functions incorrectly read Page Table Entries (PTEs) without proper locking during memory operations.
Medium [CVE-2026-64299] Prevent out-of-bounds read in glob matching
In the Linux kernel, the following vulnerability has been resolved: tracing: Prevent out-of-bounds read in glob matching String event fields are not necessarily NUL-terminated, so the filter predicate functions (filter_pred_string(), filter_pred_strloc() and filter_pred_strrelloc()) pass the field length to the regex match callbacks, and the length-aware matchers honour it. regex_match_glob() was the exception: it ignored the length and called glob_match(), which scans the string until it hits a NUL byte. One example is the dynamic char array of the xfs_* namespace tracepoints, which is copied without a trailing NUL. For such a field, glob matching reads past the end of the event field, causing a KASAN slab-out-of-bounds read in glob_match(), reached via regex_match_glob() and filter_match_preds() from the xfs_lookup tracepoint. Add a length-bounded glob_match_len() and use it from regex_match_glob() so glob matching always stops at the field boundary. The matching loop is factored into a shared helper so glob_match() keeps its behaviour. This vulnerability allows a local attacker to trigger an out-of-bounds read by providing specially crafted input to glob matching functions. The issue arises because these functions did not correctly handle string event fields that were not properly terminated.
Medium [CVE-2026-64324] validate free block extents against the partition length
In the Linux kernel, the following vulnerability has been resolved: udf: validate free block extents against the partition length udf_free_blocks() checks the logical block number and count against the partition length, but drops the extent offset from that final bound. A crafted extent can pass the guard while logicalBlockNum + offset + count points past the partition, which later indexes past the space bitmap array. A single ftruncate(2) on a file backed by such an extent reliably panics the kernel. This is a local availability issue. On desktop systems where UDisks/polkit allows the active user to mount removable UDF media without CAP_SYS_ADMIN, an unprivileged local user can supply the crafted filesystem and trigger the panic by truncating a writable file on it. Systems that require root or CAP_SYS_ADMIN to mount the image have a higher prerequisite. No confidentiality or integrity impact is claimed: the reproduced primitive is an out-of-bounds read of a bitmap pointer slot followed by a kernel panic. Use the already computed logicalBlockNum + offset + count value for the partition length check. Also make load_block_bitmap() reject an out-of-range block group before indexing s_block_bitmap[], so corrupted callers cannot walk past the flexible array. A flaw was found in the Linux kernel's Universal Disk Format (UDF) filesystem.
Medium [CVE-2026-64297] check return value of module_extend_max_pages
In the Linux kernel, the following vulnerability has been resolved: module: decompress: check return value of module_extend_max_pages() module_extend_max_pages() calls kvrealloc() internally and returns -ENOMEM on allocation failure. If the initial allocation fails, info->pages remains NULL and info->max_pages remains 0. Subsequent calls to module_get_next_page() will attempt to dynamically grow the array by calling module_extend_max_pages(info, 0) since info->used_pages is 0. This results in kvrealloc(NULL, 0) returning ZERO_SIZE_PTR, which is treated as a success, leading to a dereference of ZERO_SIZE_PTR and a kernel oops. Fix: add the missing error check after module_extend_max_pages() and return immediately on failure. This matches the pattern used by every other kvrealloc() caller in the module loading path. [Sami: Corrected the analysis in the commit message.] An unchecked return value in the `module_extend_max_pages()` function within the module decompression logic can lead to a null pointer dereference. This vulnerability can be triggered if memory allocation fails during module loading, resulting in a kernel oops. This can allow a local attacker to cause a denial of service (DoS) by crashing the system. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-476. Affected Red Hat products: Red Hat Enterprise Linux 10.
Medium [CVE-2026-64365] fix UAF on inrange_timer at driver unbind
In the Linux kernel, the following vulnerability has been resolved: HID: letsketch: fix UAF on inrange_timer at driver unbind letsketch_driver does not provide a.remove callback, but letsketch_probe() arms a per-device timer: timer_setup(&data->inrange_timer, letsketch_inrange_timeout, 0); The timer is re-armed from letsketch_raw_event() with a 100 ms timeout on every pen-in-range report, and its callback dereferences data->input_tablet to deliver a synthetic BTN_TOOL_PEN release. letsketch_data is allocated with devm_kzalloc(), and its input_dev fields are devm-allocated via letsketch_setup_input_tablet(). On device unbind (USB unplug or rmmod), the HID core runs its default teardown and devm cleanup frees both letsketch_data and the input devices. Because no.remove callback exists, nothing drains the timer first: if raw_event armed it within ~100 ms of the unbind, the pending timer fires on freed memory. This is a UAF read of data and of data->input_tablet, followed by input_report_key() / input_sync() into the freed input_dev. The same problem can occur on the probe error path: if hid_hw_start() enabled I/O on an always-poll-quirk device and then failed, raw_event may have armed the timer before devm releases data. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
Medium [CVE-2026-64292] Move vevent memory allocation outside spinlock
In the Linux kernel, the following vulnerability has been resolved: iommufd: Move vevent memory allocation outside spinlock The veventq memory allocation happens inside the spinlock. Given its depth is decided by the user space, this leaves a vulnerability, where userspace can allocate large queues to exhaust atomic memory reserves. Move the allocation outside the spinlock and use GFP_NOWAIT, which can fail fast under memory pressure without dipping into the GFP_ATOMIC reserves or direct-reclaiming from the threaded IRQ handler. On allocation failure, queue the lost_events_header (so userspace learns of the drop) and return -ENOMEM so the caller learns of the kernel-side memory pressure. This is intentionally distinct from the queue-overflow path, which also queues the lost_events_header but returns 0: a full queue is an expected userspace-pacing condition rather than a kernel error. A subsequent change will cap the upper bound of the veventq_depth. A local user can exploit this vulnerability by allocating large `veventq` queues, which are processed inside a spinlock. This can lead to the exhaustion of atomic memory reserves, resulting in a Denial of Service (DoS) condition. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-770. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9.