Red Hat Linux Linux Kernel Vulnerabilities & Security Advisories
2148 advisories tracked · Red Hat Security Data API · 1 listed in the CISA Known Exploited Vulnerabilities catalog
Every row below is a published Red Hat Linux advisory that VulniPulse classified as Linux Kernel, with the CVEs, affected and fixed releases and exploitation status the vendor stated. Severity mix: 781 high, 1364 medium, 1 low.
Android app · Google Play
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 32 official vendor sources and 160+ reviewed platform categories.
Source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat Linux Kernel advisories
Medium [CVE-2026-64223] consume only present negotiated TTLM maps
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: consume only present negotiated TTLM maps ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements against the number of link-map entries indicated by link_map_presence. ieee80211_parse_neg_ttlm() must consume the same layout. The parser advanced its cursor for every TID, including TIDs whose presence bit is clear and therefore have no map bytes in the element. A sparse map can then make a later present TID read past the validated element. The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by valid_links before being applied to driver state, so a peer cannot turn the read into a policy change. Under KUnit + KASAN with an exact-sized element allocation the OOB read is reported as a slab-out-of-bounds; whether the same trigger fires under the production RX path depends on surrounding allocator state. Advance the cursor only when the current TID has a map present. This vulnerability, an out-of-bounds read, occurs when parsing negotiated Time-To-Live Map (TTLM) elements. A remote attacker could craft a sparse map, causing the parser to read beyond the intended memory boundary. While direct policy changes are prevented, this issue can lead to memory corruption, potentially impacting system stability.
Medium [CVE-2026-64244] set mem->altmap after successful device registration
In the Linux kernel, the following vulnerability has been resolved: drivers/base/memory: set mem->altmap after successful device registration If __add_memory_block() fails at xa_store() (under memory pressure for example), device_unregister() is called, which eventually triggers memory_block_release() with mem->altmap still set, causing a WARN_ON(mem->altmap). This was triggered by modifying virtio-mem driver. Fix this by delaying the assignment of mem->altmap until after __add_memory_block() has succeeded. This vulnerability occurs when a memory block fails to register, but its associated memory map is not properly cleared during device removal. This can lead to a system warning and potential instability or a kernel crash, allowing a local attacker to cause a Denial of Service (DoS). Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-64253] clear PF_BLOCK_TS in copy_process
In the Linux kernel, the following vulnerability has been resolved: kernel/fork: clear PF_BLOCK_TS in copy_process() PF_BLOCK_TS is only set in blk_time_get_ns() when current->plug is non-NULL, and blk_finish_plug() clears it via __blk_flush_plug() before NULLing the plug pointer. copy_process() breaks the invariant by inheriting PF_BLOCK_TS from the parent while resetting the child's plug to NULL. Clear PF_BLOCK_TS alongside that assignment so callers can rely on "PF_BLOCK_TS set implies current->plug!= NULL" and dereference current->plug unguarded. The `copy_process()` function, responsible for creating new processes, incorrectly inherits a flag (`PF_BLOCK_TS`) from the parent process while simultaneously setting a related pointer (`current->plug`) to null in the child process. This inconsistency can lead to the kernel attempting to access a null pointer without proper validation. A local attacker could potentially exploit this to trigger a system crash, leading to a Denial of Service (DoS). Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-476. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE.
Medium [CVE-2026-64222] avoid double free of pool->stack on AQ init failure
In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: avoid double free of pool->stack on AQ init failure otx2_pool_aq_init() frees pool->stack when mailbox sync or retry allocation fails, but leaves the pointer unchanged. Later, otx2_sq_aura_pool_init() unwinds the partial setup through otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific cn20k_pool_aq_init() implementation has the same bug in its corresponding error path. Set pool->stack to NULL immediately after the local free so the shared cleanup path does not free the same stack again while cleaning up partially initialized pool state. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime validation was not performed because reproducing this path requires OcteonTX2/CN20K hardware. This vulnerability involves a double free of memory during the initialization of the Accelerated Queue (AQ) when an error occurs. Specifically, the `pool->stack` memory is freed twice, which can lead to memory corruption. A local attacker could potentially exploit this to cause system instability or a denial of service (DoS).
Medium [CVE-2026-64239] delete tried region in regions_rmdirs
In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: delete tried region in regions_rmdirs() DAMON sysfs maintains the DAMOS tried region directory objects via a linked list. When the user requests refresh of the directories, DAMON sysfs removes all the region directories first, and then generate updated regions directory on the empty space. The removal function (damon_sysfs_scheme_regions_rm_dirs()) only puts the kobj objects. Deletion of the container region object from the linked list is done inside the kobj release callback function. If somehow the callback invocation is delayed, the list will contain regions list that gonna be freed. If the updated region directories creation is started in this situation, the list can be corrupted and use-after-free can happen. Because the kobj objects are managed by only DAMON sysfs, the issue cannot happen in normal situation. But, such delays can be made on kernels that built with CONFIG_DEBUG_KOBJECT_RELEASE. On the kernel, the issue can indeed be reproduced like below. # damo start --damos_action stat # cd /sys/kernel/mm/damon/admin/kdamonds/0/ # for i in {1..10}; do echo update_schemes_tried_regions > state; done # dmesg | grep underflow [ 89.296152] refcount_t: underflow; use-after-free. Fix the issue by removing the region object from the list when decrementing the reference count.
Medium [CVE-2026-64210] Fix unlocked writing to ICOSQ
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix unlocked writing to ICOSQ During napi poll, when the affinity changes and there's still XSK work to be done, we trigger an ICOSQ interrupt on the new CPU. However, this triggering on the ICOSQ is done unprotected. There are 2 such races: A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is running from a different CPU due to affinity change. This can happen because IRQ triggering is done after napi_complete_done(). At this point the NAPI can be scheduled on a different CPU. Like this: CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI) ------------------------------- -------------------------------- napi_complete_done() clears SCHED mlx5e_cq_arm(...) napi_schedule_prep() sets SCHED mlx5e_napi_poll() mlx5e_xsk_alloc_rx_mpwqe() mlx5e_icosq_sync_lock() // noop memcpy 640 B UMR body advance sq->pc by 10 mlx5e_trigger_irq(&c->icosq) wqe_info[pi] = {NOP, 1} mlx5e_post_nop() advances sq->pc B) mlx5e_trigger_irq() is called on the ICOSQ when mlx5e_trigger_napi_icosq() is running. But ICOSQ has an optimized locking scheme that doesn't work for this scenario. Kick the async ICOSQ instead which is always locked.
Medium [CVE-2026-64225] add bounds check to cgx_speed_mbps index
In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: CGX: add bounds check to cgx_speed_mbps index cgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values 0-15. If it returns a value >= 13, this causes an out-of-bounds array access. Add a bounds check and default to speed 0 if the index is out of range. Specifically, the `RESP_LINKSTAT_SPEED` function can produce an index value that exceeds the allocated size of the `cgx_speed_mbps` array, leading to memory corruption. This could result in a system crash (Denial of Service). A flaw was found in the Linux kernel octeontx2-af driver, in the CGX (Converged Gigabit Ethernet) firmware interface used by Marvell OcteonTX2 network adapters. Because this index is not validated before use, an unexpected firmware response can cause an out-of-bounds array access, leading to memory corruption and a kernel crash. This is classified as CWE-125 (Out-of-bounds Read) and results in a Denial of Service impact. Exploitation requires a system with an affected OcteonTX2 CGX-based network adapter present, consistent with the AV:L and PR:L values in the CVSS vector. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-125.
Medium [CVE-2026-64245] fix a possible UAF in fb_find_mode
In the Linux kernel, the following vulnerability has been resolved: fbdev: modedb: fix a possible UAF in fb_find_mode() If mode_option is NULL, it is assigned from mode_option_buf: if (!mode_option) { fb_get_options(NULL, &mode_option_buf); mode_option = mode_option_buf; } Later, name is assigned from mode_option: const char *name = mode_option; However, mode_option_buf is freed before name is no longer used: kfree(mode_option_buf); while name is still accessed by: if ((name_matches(db[i], name, namelen) || Since name aliases mode_option_buf, this may result in a use-after-free. Fix this by extending the lifetime of mode_option_buf until the end of the function by using scope-based resource management for cleanup. A flaw was found in the Linux kernel's framebuffer device (fbdev) subsystem. Specifically, within the fb_find_mode() function, a use-after-free (UAF) vulnerability exists. This occurs because a memory buffer is released while still being referenced, potentially allowing an attacker to access or manipulate freed memory. Such an exploit could lead to system instability, denial of service, or potentially arbitrary code execution. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9.
Medium [CVE-2026-64206] cancel pending_rx_work before taking conn->lock
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock l2cap_conn_del() takes conn->lock and then calls cancel_work_sync() for pending_rx_work. process_pending_rx() takes the same mutex, so teardown can deadlock against the worker it is flushing. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the l2cap_conn_ready() -> queue_work(..., &conn->pending_rx_work) submit path, the l2cap_conn_del() -> cancel_work_sync(&conn->pending_rx_work) teardown path, and the process_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep WARNING: possible circular locking dependency detected process_pending_rx+0x21/0x2a [vuln_msv] l2cap_conn_del.constprop.0+0x3f/0x4e [vuln_msv] *** DEADLOCK *** Cancel pending_rx_work before taking conn->lock, matching the existing lock-before-drain ordering used for the two delayed works in the same teardown path. The pending_rx queue is still purged after the work has been cancelled and conn->lock has been acquired. A flaw was found in the Linux kernel's Bluetooth Logical Link Control and Adaptation Protocol (L2CAP) subsystem. A local attacker could trigger a deadlock during connection teardown due to a circular locking dependency between `l2cap_conn_del()` and `process_pending_rx()` functions.
Medium [CVE-2026-64190] fix NULL pointer dereference in team_xmit during mode change
In the Linux kernel, the following vulnerability has been resolved: net: team: fix NULL pointer dereference in team_xmit during mode change __team_change_mode() clears team->ops with memset() before restoring safe dummy handlers via team_adjust_ops(). A concurrent team_xmit() running under RCU on another CPU can read team->ops.transmit during this window and call a NULL function pointer, crashing the kernel. The race requires a mode change (CAP_NET_ADMIN) concurrent with transmit on the team device. BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: 0010 [#1] SMP KASAN NOPTI RIP: 0010:0x0 Call Trace: team_xmit (drivers/net/team/team_core.c:1853) dev_hard_start_xmit (net/core/dev.c:3904) __dev_queue_xmit (net/core/dev.c:4871) packet_sendmsg (net/packet/af_packet.c:3109) __sys_sendto (net/socket.c:2265) The original code assumed that no ports means no traffic, so mode changes could freely memset()/memcpy() the ops. AF_PACKET with forced carrier breaks that assumption. Prevent the race instead of making it safe: replace memset()/memcpy() with per-field updates that never touch transmit or receive. Those two handlers are managed solely by team_adjust_ops(), which already installs dummies when tx_en_port_count == 0 (always true during mode change since no ports are present).
Medium [CVE-2026-64187] fail recovery on a committed log item with no regions
In the Linux kernel, the following vulnerability has been resolved: xfs: fail recovery on a committed log item with no regions If the first op of a transaction is a bare transaction header (len == sizeof(struct xfs_trans_header)), xlog_recover_add_to_trans() adds an item but no region, leaving it on r_itemq with ri_cnt == 0 and ri_buf == NULL. The header can be split across op records, so later ops may still add regions; the item is only invalid if the transaction commits with none. The runtime commit path never emits such a transaction, so this only happens on a crafted log. It came from an AI-assisted code audit of the recovery parser. xlog_recover_reorder_trans() calls ITEM_TYPE() on the item, which reads *(unsigned short *)item->ri_buf[0].iov_base and faults on the NULL ri_buf. Reject it there, before the commit handlers that also read ri_buf[0]. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; and 2 more.
Medium [CVE-2026-64205] fix hardware state machine corruption in error path
In the Linux kernel, the following vulnerability has been resolved: i2c: i801: fix hardware state machine corruption in error path A severe livelock and subsequent Hung Task panic were observed in the i2c-i801 driver during concurrent Fuzzing. The crash is caused by an unconditional hardware register cleanup in the error handling path of i801_access(). When i801_check_pre() fails (e.g., returning -EBUSY because the SMBus controller is actively used by BIOS/ACPI), the kernel does not actually acquire the hardware ownership. However, the code jumps to the 'out' label and executes: iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv)); This forcefully clears the INUSE_STS lock and resets the hardware status flags without owning the controller. Doing so interrupts ongoing BIOS/ACPI transactions and totally corrupts the SMBus hardware state machine. Consequently, all subsequent i801_access() calls fail at the pre-check stage, triggering an endless stream of "SMBus is busy, can't use it!" error logs. Over a slow serial console, this printk flood monopolizes the CPU (Console Livelock), starving other processes trying to acquire the mmap_lock down_read semaphore, ultimately triggering the hung task watchdog. Fix this by moving the 'out' label below the hardware register cleanup.
Medium [CVE-2026-64173] Do not call map->ops->elt_free if elt_alloc fails
In the Linux kernel, the following vulnerability has been resolved: tracing: Do not call map->ops->elt_free() if elt_alloc() fails In paths where tracing_map_elt_alloc() failed to allocate objects, the map->ops->elt_alloc() call was never successful. In this case, map->ops->elt_free() should not be called. An issue in the tracing subsystem's memory management could lead to incorrect deallocation of tracing map elements. Specifically, the system attempts to free memory that was never successfully allocated, which can result in memory corruption. This vulnerability may lead to system instability or a denial of service (DoS) condition. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-1341. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-64121] report ethtool stats over num_tx_queues
In the Linux kernel, the following vulnerability has been resolved: net: ifb: report ethtool stats over num_tx_queues ifb_dev_init() allocates dp->tx_private to dev->num_tx_queues entries via kzalloc_objs(*txp, dev->num_tx_queues). Both IFB per-queue RX and TX stats live in those entries: ifb_xmit() updates txp->rx_stats using the skb queue mapping, ifb_ri_tasklet() updates txp->tx_stats, and ifb_stats64() aggregates both over dev->num_tx_queues. The ethtool stats callbacks instead size and walk the per-queue stats with dev->real_num_rx_queues and dev->real_num_tx_queues. With an asymmetric device where the RX queue count exceeds the TX queue count, for example: ip link add name ifb10 numtxqueues 1 numrxqueues 8 type ifb ethtool -S ifb10 ifb_get_ethtool_stats() indexes past the tx_private allocation and copies adjacent slab data through ETHTOOL_GSTATS. Use dev->num_tx_queues consistently for the stats strings, the stats count, and the stats data walks. This reports one RX stats group and one TX stats group for each backing ifb_q_private entry, which is the queue set IFB can actually populate. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
Medium [CVE-2026-64134] Don't setup bogus iov_iter for silencing
In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Don't setup bogus iov_iter for silencing At transition to the iov_iter for PCM data transfer, we blindly applied the iov_iter setup also for silencing (i.e. data = NULL), and it leads to a calculation of bogus iov_iter. Fortunately this didn't cause troubles on most of architectures but it goes wrong on RISC-V now, causing a NULL dereference. Handle the NULL data case to treat the silencing in interleaved_copy() for addressing the bug above. noninterleaved_copy() has already the NULL data handling, so it doesn't need changes. A flaw was found in the Linux kernel's Advanced Linux Sound Architecture (ALSA) Pulse Code Modulation (PCM) subsystem. This vulnerability can be triggered by a local user, potentially causing a system crash (Denial of Service). Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-476. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-64058] Fix netfs_read_folio to wait on writeback
In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_read_folio() to wait on writeback Fix netfs_read_folio() to wait for an ongoing writeback to complete so that it can trust the dirty flag and whatever is attached to folio->private (folio->private may get cleaned up by the collector before it clears the writeback flag). A flaw was found in the Linux kernel's network file system (netfs) component. This can lead to the system incorrectly trusting the dirty flag and prematurely cleaning up private data associated with a folio, potentially resulting in data integrity issues or unexpected system behavior. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-367. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
Medium [CVE-2026-64038] (lm90) Stop work before releasing hwmon device
In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Stop work before releasing hwmon device Sashiko reports: In lm90_probe(), the devm action to cancel the alert_work and report_work (lm90_restore_conf) is registered in lm90_init_client() before devm_hwmon_device_register_with_info() is called. Because devm executes cleanup actions in reverse order during module unbind or probe failure, the hwmon device is unregistered and freed first. If lm90_alert_work() or lm90_report_alarms() runs in the window between the hwmon device being freed and the delayed works being cancelled, lm90_update_alarms() will dereference the freed data->hwmon_dev here. Fix the problem by canceling the workers separately after registering the hwmon device and before registering the interrupt handler. This ensures that the workers are canceled after interrupts are disabled and before the hwmon device is released. Add "shutdown" flag to indicate that device shutdown is in progress to prevent workers from being re-armed. A flaw was found in the Linux kernel's hardware monitoring (hwmon) subsystem. A timing issue in the lm90 driver can cause the system to attempt to access freed memory during module cleanup. This use-after-free vulnerability could lead to system instability and a Denial of Service (DoS).
Medium [CVE-2026-64128] drop ISO_END frames received without prior ISO_START
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: drop ISO_END frames received without prior ISO_START ISO data PDUs carry a packet-boundary flag indicating START, CONT, END or SINGLE. The ISO_CONT branch of iso_recv() guards against a missing ISO_START by checking conn->rx_len before touching conn->rx_skb, but ISO_END does not. If a peer sends an ISO_END as the first packet on a fresh ISO connection, conn->rx_skb is still NULL and conn->rx_len is zero, so skb_put(conn->rx_skb,...) dereferences NULL and oopses. For BIS, where receivers sync to a broadcaster without pairing, any broadcaster on the air can trigger this. Mirror the ISO_CONT check at the top of ISO_END so a stray end fragment is logged and dropped instead of crashing the host. A flaw was found in the Linux kernel's Bluetooth Isochronous Stream (ISO) subsystem. This can lead to a null pointer dereference, causing the kernel to crash and resulting in a denial of service. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-476. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-64159] Fix zeropoint update where i_size > remote_i_size
In the Linux kernel, the following vulnerability has been resolved: netfs: Fix zeropoint update where i_size > remote_i_size Fix the update of the zero point[*] by netfs_release_folio() when there is uncommitted data in the pagecache beyond the folio being released but the on-server EOF is in this folio (ie. i_size > remote_i_size). The update needs to limit zero_point to remote_i_size, not i_size as i_size is a local phenomenon reflecting updates made locally to the pagecache, not stuff written to the server. remote_i_size tracks the server's i_size. [*] The zero point is the file position from which we can assume that the server will just return zeros, so we can avoid generating reads. Note that netfs_invalidate_folio() probably doesn't need fixing as zero_point should be updated by setattr after truncation or fallocate. Found with: fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \ /xfstest.test/junk --replay-ops=junk.fsxops using the following as junk.fsxops: truncate 0x0 0x1bbae 0x82864 write 0x3ef2e 0xf9c8 0x1bbae write 0x67e05 0xcb5a 0x4e8f6 mapread 0x57781 0x85b6 0x7495f copy_range 0x5d3d 0x10329 0x54fac 0x7495f write 0x64710 0x1c2b 0x7495f mapread 0x64000 0x1000 0x7495f on cifs with the default cache option. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat package: kernel.
Medium [CVE-2026-64057] Fix the locking used by afs_get_link
In the Linux kernel, the following vulnerability has been resolved: afs: Fix the locking used by afs_get_link() The afs filesystem in the kernel doesn't do locking correctly for symbolic links. There are a number of problems: (1) It doesn't do any locking around afs_read_single() to prevent races between multiple ->get_link() calls, thereby allowing the possibility of leaks. (2) It doesn't use RCU barriering when accessing the buffer pointers during RCU pathwalk. (3) It can race with another thread updating the contents of the symlink if a third party updated it on the server. Fix this by the following means: (0) Move symlink handling into its own file as this makes it more complicated. (1) Take the validate_lock around afs_read_single() to prevent races between multiple ->get_link() calls. (2) Keep a separate copy of the symlink contents with an rcu_head. This is always going to be a lot smaller than a page, so it can be kmalloc'd and save quite a bit of memory. It also needs a refcount for non-RCU pathwalk. (3) Split the symlink read and write-to-cache routines in afs from those for directories. (4) Discard the I/O buffer as soon as the write-to-cache completes as this is a full page (plus a folio_queue). (5) If there's no cache, discard the I/O buffer immediately after reading and copying if there is no cache.