Red Hat Linux Security Advisories & CVEs
4699 advisories tracked · Red Hat Security Data API · direct feeds checked every minute; rate-limited backstops use a safe source cadence
Android app · Google Play
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 34 official vendor sources and 160+ reviewed platform categories.
Security advisories for your Red Hat release
Pick your distribution release to see every advisory issued for it and its severity mix. Fixes ship as errata — keep the system patched. This is the release's advisory history, not a per-package scan.
Official source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat advisories
High [CVE-2026-68100] validate num_subauth when copying ACE in set_ntacl_dacl
In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate num_subauth when copying ACE in set_ntacl_dacl set_ntacl_dacl() copies each ACE from the attacker-controlled stored security descriptor verbatim into the response DACL without checking sid.num_subauth. The ACE bytes (including an unchecked num_subauth) originate from an authenticated SMB2_SET_INFO(SecInfo=DACL) that is stored raw via ksmbd_vfs_set_sd_xattr(); parse_dacl() rejects a bad ACE with `break` rather than an error, so parse_sec_desc() still returns success and the malformed SD reaches the xattr intact. On a subsequent SMB2_QUERY_INFO(SecInfo=DACL) for an inode carrying a POSIX access ACL, build_sec_desc() -> set_ntacl_dacl() -> set_posix_acl_entries_dacl() walks the copied ACEs and reads ntace->sid.sub_auth[ntace->sid.num_subauth - 1] with num_subauth taken straight from the stored SD. Since sub_auth[] is fixed at SID_MAX_SUB_AUTHORITIES (15), a crafted num_subauth (e.g. 255) drives an out-of-bounds heap read of ~1 KB with an offset fully controlled by an authenticated client. The sibling functions already gate this field: parse_dacl() -- num_subauth == 0 || > SID_MAX_SUB_AUTHORITIES parse_sid() -- num_subauth > SID_MAX_SUB_AUTHORITIES smb_copy_sid() -- min_t(u8, num_subauth, SID_MAX_SUB_AUTHORITIES) set_ntacl_dacl() is the lone inconsistent path that omits the check.
High [CVE-2026-68099] restore DACL size on check_add_overflow to avoid malformed ACL
In the Linux kernel, the following vulnerability has been resolved: ksmbd: restore DACL size on check_add_overflow() to avoid malformed ACL check_add_overflow() unconditionally writes the truncated sum into *d even on overflow, per its contract in include/linux/overflow.h. The four check_add_overflow() guards in set_posix_acl_entries_dacl() and set_ntacl_dacl() break out of the ACE-building loops on overflow, but the truncated *size is then consumed downstream at the end of set_ntacl_dacl(): pndacl->size = cpu_to_le16(le16_to_cpu(pndacl->size) + size); This produces an on-wire NT ACL whose pndacl->size under-reports the bytes actually written by the preceding fill_ace_for_sid()/memcpy() calls, yielding a malformed ACL that can trigger out-of-bounds reads when re-parsed by clients or ksmbd itself. Restore *size to its pre-addition value on each overflow branch (via `*size -= ace_sz` / `size -= nt_ace_size`) so that after the break, *size once again holds the cumulative size of the successfully-written ACEs. The ksmbd DACL builders are the only check_add_overflow() sites found where an overflow path breaks out of a loop and the destination value is consumed afterward. The other nearby break-style cases either return -EINVAL on overflow (transport_ipc.c) or break without consuming the overflowed destination value afterward (buildid.c).
High [CVE-2026-68093] Bump asid_generation on CPU online to avoid ASID collision after hotplug
In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Bump asid_generation on CPU online to avoid ASID collision after hotplug If a vCPU stays scheduled out (or blocked) while the last pCPU it ran on goes through a hotplug cycle (online->offline->online), and the vCPU then resumes execution on the same pCPU, then it is possible for it to run with an ASID that has now been assigned to a different vCPU, resulting in stale TLB translations being used. svm_enable_virtualization_cpu() resets asid_generation to 1 and sets next_asid to max_asid + 1 on every CPU online event, including hotplug cycles. Because next_asid starts beyond the pool boundary, the first call to new_asid() after an online event always wraps the pool, incrementing asid_generation to 2 and assigning ASIDs starting from min_asid. Consider two vCPUs from different VMs, vCPU-A pinned to CPU-X holding asid_generation=2 and ASID=N from before the hotplug event: 1. 2. One or more vCPUs migrate to CPU-X and call new_asid(), wrapping the pool and consuming ASIDs starting from min_asid. 3. vCPU-A enters pre_svm_run() on CPU-X: current_vmcb->cpu is unchanged so the migration branch is skipped. Its saved asid_generation=2 matches sd->asid_generation=2, so the generation check silently passes and vCPU-A continues running with ASID=N — the same ASID just freshly assigned to vCPU-B.
High [CVE-2026-59087] heap buffer overflow in `file-seattle-filmworks` load — `fread` writes attacker-controlled length into undersized allocation
A flaw was found in the GIMP image manipulation program, specifically within its Seattle Filmworks file loader. A remote attacker could exploit this vulnerability by tricking a user into opening a specially crafted Seattle Filmworks file. This could lead to a heap overflow, allowing the attacker to write several kilobytes of controlled data beyond the intended memory buffer. Such an overflow can result in memory corruption, potentially leading to arbitrary code execution or a denial of service. This flaw is rated as Important because it allows for arbitrary code execution or denial of service within the context of the GIMP application. Exploitation requires a user to open a specially crafted Seattle Filmworks file, which can trigger a heap buffer overflow in the file loader. Red Hat severity: Important — CVSS 7.8 (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H). Weakness: CWE-787. Affected Red Hat products: Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE.
High [CVE-2026-72568] Denial of Service via Out-of-Bounds Read in Cluster Bus
An out-of-bounds read vulnerability in Redis through 8.8.1 allows an adjacent unauthenticated attacker to cause denial of service or information disclosure by sending a specially crafted PING message to the Redis Cluster Bus port. This CVE has been marked as rejected by the assigning CNA. Red Hat severity: not rated. Weakness: CWE-125. Affected Red Hat products: Red Hat Enterprise Linux 9; Red Hat Hardened Images. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected. Red Hat fixing advisory: RHSA-2026:65120, RHSA-2026:43236.
High [CVE-2026-71393] integer overflow via a malicious font file
GNU Emacs for Android is vulnerable to an integer overflow in sfnt_read_name_table() in src/sfnt.c. The function computes an allocation size using a 32-bit length value from a TrueType font file without overflow checking. On 32-bit targets, a crafted font causes the calculation to wrap, resulting in an undersized heap allocation. A subsequent read() call writes beyond the buffer, causing a heap buffer overflow. An attacker can deliver a malicious font file via email, EWW (Emacs Web Wowser), or documents with custom faces, causing Emacs to load it. This can lead to heap memory corruption and potential code execution. This issue was fixed in commit d51a4722316efe0960994d371e1859099894d1ca An integer overflow can occur when a specially crafted font file is processed on 32-bit systems due to an improper overflow checking. This can cause an undersized heap allocation and subsequently a heap-based buffer overflow, resulting in memory corruption and a denial of service. To exploit this flaw, a user needs to load a malicious font file or a document with custom faces, limiting its exposure. Additionally, this flaw is specific to GNU Emacs for Android on 32-bit target systems. For these reasons, this vulnerability has been rated with a moderate severity. Red Hat severity: Moderate — CVSS 7.8 (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H). Weakness: CWE-190.
High [CVE-2026-71392] integer overflow via a malicious font file
GNU Emacs for Android is vulnerable to an integer overflow in the sfnt_read_cmap_format_12() function in src/sfnt.c. When processing a crafted TrueType font file, an unguarded addition in the xmalloc allocation call wraps around on 32-bit builds, causing a heap buffer overflow write. An attacker can deliver a malicious font file via email, EWW (Emacs Web Wowser), or documents with custom faces, causing Emacs to load it. This results in heap memory corruption that can lead to code execution. This issue was fixed in commit c4e20777c26548722a37b03db93243e83a0d6188 An integer overflow can occur when a specially crafted font file is processed on 32-bit systems due to an unguarded addition during memory allocation. This can cause an undersized heap allocation and subsequently a heap-based buffer overflow, resulting in memory corruption and a denial of service. To exploit this flaw, a user needs to load a malicious font file or a document with custom faces, limiting its exposure. Additionally, this flaw is specific to GNU Emacs for Android on 32-bit target systems. For these reasons, this vulnerability has been rated with a moderate severity. Red Hat severity: Moderate — CVSS 7.8 (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H). Weakness: CWE-190.
High [CVE-2026-19389] integer overflow/underflow in asfdemux bounds checks leading to out-of-bounds read
integer overflow/underflow in asfdemux bounds checks leading to out-of-bounds read. Red Hat rates this important (CVSS 7.1). Weakness: CWE-190. Red Hat lists fixing advisory RHSA-2026:55865 with package gstreamer1-plugins-bad-free-0:1.22.12-7.el9_8.4, gstreamer1-plugins-ugly-free-0:1.22.12-6.el9_8.2, gstreamer1-plugins-ugly-free-0:1.26.7-2.el10_2.2. Affected products named by the advisory: Red Hat Enterprise Linux 9; Red Hat Enterprise Linux 10. Affected products named by the advisory: Red Hat Enterprise Linux 10.0 Extended Update Support; Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions; Red Hat Enterprise Linux 9.4 Update Services for SAP Solutions; Red Hat Enterprise Linux 9.6 Extended Update Support.
High [CVE-2026-19387] heap out-of-bounds write in adpcmdec IMA/DVI ADPCM decoder
heap out-of-bounds write in adpcmdec IMA/DVI ADPCM decoder. Red Hat rates this important (CVSS 7.6). Weakness: CWE-787. Red Hat lists fixing advisory RHSA-2026:55865 with package gstreamer1-plugins-bad-free-0:1.26.7-2.el10_2.7, gstreamer1-plugins-bad-free-0:1.22.12-7.el9_8.4, gstreamer1-plugins-ugly-free-0:1.22.12-6.el9_8.2, gstreamer1-plugins-bad-free-0:1.16.1-9.el8_10.2. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9; Red Hat Enterprise Linux 8. Affected products named by the advisory: Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions; Red Hat Enterprise Linux 10.0 Extended Update Support; Red Hat Enterprise Linux 9.6 Extended Update Support; Red Hat Enterprise Linux 8.6 Advanced Mission Critical Update Support; and 7 more.
High [CVE-2026-68388] handle overlapping allocated ranges in fallocate
In the Linux kernel, the following vulnerability has been resolved: smb/client: handle overlapping allocated ranges in fallocate smb3_simple_fallocate_range() can skip holes when an allocated range returned by the server starts before the current fallocate offset. The skipped hole is not zero-filled, but fallocate still returns success. A later write to that hole may therefore fail with ENOSPC. The function queries allocated ranges so that it can preserve existing contents and write zeroes only into holes. For example, assume the fallocate request is [100, 400) and the only allocated range returned by the server is [0, 200): Request: [100, 400) Server range: [ 0, 200) allocated Correct: [100, 200) allocated data, skip [200, 400) hole, zero-fill Current: [100, 300) skipped [300, 400) zero-filled afterwards The current code adds the full server range length, 200, to the current offset 100 and moves to 300. Ignore ranges that end before the current offset and reject ranges whose end offset overflows. This also prevents a malformed range length from causing an out-of-bounds zero-buffer read. The `smb3_simple_fallocate_range()` function, which manages file allocation, can incorrectly process overlapping allocated ranges provided by a server. This can result in parts of a file not being properly zero-filled, leading to potential data integrity issues.
High [CVE-2026-68315] validate stream count in sctp_process_strreset_inreq
In the Linux kernel, the following vulnerability has been resolved: sctp: validate stream count in sctp_process_strreset_inreq() When processing a RESET_IN_REQUEST from a peer, sctp_process_strreset_inreq() derives the stream count from the parameter length but does not check whether the resulting RESET_OUT_REQUEST would exceed SCTP_MAX_CHUNK_LEN. The OUT request header (sctp_strreset_outreq, 16 bytes) is 8 bytes larger than the IN request header (sctp_strreset_inreq, 8 bytes). Generally, the IP payload is bounded to 65535 bytes, so the stream list cannot be large enough to trigger the overflow. However, on interfaces with MTU > 65535 (e.g., loopback with IPv6 jumbograms), a stream list that fits within the incoming IN parameter can cause a __u16 overflow in sctp_make_strreset_req() when computing the OUT request size, leading to an undersized skb allocation and a kernel BUG: net/core/skbuff.c:207 skb_panic net/core/skbuff.c:2625 skb_put net/sctp/sm_make_chunk.c:1535 sctp_addto_chunk net/sctp/sm_make_chunk.c:3695 sctp_make_strreset_req net/sctp/stream.c:655 sctp_process_strreset_inreq The local setsockopt path validates the generated reset request size. However, for an incoming-only reset, it accounts for the smaller IN request even though the peer must generate an OUT request with the same stream list. Such a request cannot be completed successfully by the peer.
High [CVE-2026-68426] fix stale skb->prev after async crypto steals a GSO segment
In the Linux kernel, the following vulnerability has been resolved: xfrm: fix stale skb->prev after async crypto steals a GSO segment skb_gso_segment() leaves the segment list head with ->prev pointing at the last segment, an invariant validate_xmit_skb_list() relies on when it sets its tail pointer (tail = skb->prev). When validate_xmit_xfrm() walks a GSO list and some segments are stolen by async crypto (->xmit() returns -EINPROGRESS), those segments are unlinked from the list but the head ->prev is never updated. If the last segment is the one stolen, the returned head still has ->prev pointing at it, even though it is now owned by the crypto engine and may be freed. validate_xmit_skb_list() later does tail->next = skb, writing through that stale pointer -- a use-after-free. Repoint skb->prev at the last retained segment before returning. This vulnerability arises when asynchronous cryptographic operations incorrectly handle network packet segments, leaving a pointer to memory that has already been released. An attacker could potentially exploit this use-after-free condition to cause a system crash (denial of service) or, in some scenarios, execute unauthorized code. Red Hat severity: Important — CVSS 7.3 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:L/A:H). Weakness: CWE-825.
High [CVE-2026-68201] drain a slave's callback before its master detaches it
In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: drain a slave's callback before its master detaches it snd_timer_close_locked() drains the closing instance's own in-flight callback (IFLG_CALLBACK) before freeing it, but not its slaves'. When a master instance is closed, remove_slave_links() clears each slave's ->timer; the slave's own close then reads timer == NULL and takes the branch that skips the drain entirely (snd_timer_stop_slave() also no-ops on a NULL timer). So a slave whose callback is still running when the master is closed is freed underneath the live callback, leading to use-after-free. Drain the slaves too before remove_slave_links() severs them. snd_timer_stop() has already taken this instance off the active list, so no new slave callback can be queued. Take the slaves off the ack list so a pending one can't fire either, then wait for any that is already in flight. A flaw was found in the ALSA (Advanced Linux Sound Architecture) timer component of the Linux kernel. When a master timer instance is closed, it does not properly ensure that all associated slave timer callbacks have finished executing before detaching them. This oversight can lead to a use-after-free vulnerability, where a freed memory region is accessed, potentially causing system instability, crashes, or allowing an attacker to execute arbitrary code.
High [CVE-2026-68086] write all dirty file folios when collapsing
In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: write all dirty file folios when collapsing [There is no upstream commit, as this code was removed by upstream commit 044925f9b565 ("mm: fs: remove filemap_nr_thps*() functions and their users")] As-is, khugepaged and writable-file opening exclude each other. A file cannot be open writeable and have THPs (because the filesystem is not aware of them). khugepaged will never collapse file pages for files that are opened writeable. On an open(O_RDWR/O_WRONLY), the page cache for that particular file is dropped. This is fine because nothing could've been dirtied. However, there is an edge-case: collapse_file() might not be able to coexist with concurrent writers, but it can coexist with dirty folios (from previous writers). Therefore, the following can happen: open(file, O_RDWR) write(file) close(file) madvise(file_mapping, MADV_COLLAPSE, some non-dirty range) open(file, O_RDWR) nr_thps > 0 truncate_inode_pages() /* THPs are cleared out, but so are the dirty folios */ When this edge-case happens, there is data loss, as the dirty folios are fully discarded. Fix it by fully writing back the page cache (and waiting) when collapsing file THPs. Doing so provides the guarantee that no dirty folio will be observed while there are active THPs.
High [CVE-2026-68236] set new_stream to NULL after release
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: set new_stream to NULL after release In dm_update_crtc_state(), the skip_modeset path releases new_stream via dc_stream_release() but does not set the pointer to NULL. If a later error (e.g., color management failure) triggers the fail label, the error path calls dc_stream_release() again on the same dangling pointer, causing a double release and potential use-after-free. Fix this by setting new_stream to NULL after the initial release. (cherry picked from commit 99f3af19073b3ddbfd96e789124cce12c4277b28) Specifically, within the `dm_update_crtc_state()` function, a stream pointer is released but not subsequently set to NULL. This issue could potentially lead to memory corruption or a denial of service. Red Hat severity: Important — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-763. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
High [CVE-2026-68293] Fix MCIA register buffer overflow on 32 dword reads
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix MCIA register buffer overflow on 32 dword reads The MCIA register can return up to 32 dwords (128 bytes) when the device advertises the mcia_32dwords capability, but struct mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just 12 dwords (48 bytes) of data. mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then memcpy()s that many bytes out of the register, potentially reading past the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this is caught as a buffer overflow while reading the module EEPROM via ethtool: detected buffer overflow in memcpy kernel BUG at lib/string_helpers.c:1048! RIP: 0010:fortify_panic+0x13/0x20 Call Trace: mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core] mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core] mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core] eeprom_prepare_data+0xf3/0x170 ethnl_default_doit+0xf1/0x3b0 Extend the mcia_reg layout to 32 dwords. This leads to a buffer overflow, which can cause a kernel bug and result in a system crash, leading to a Denial of Service (DoS). Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-120.
High [CVE-2026-68390] hold hdev->lock for hci_conn_params lookups
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold hdev->lock for hci_conn_params lookups hci_conn_params_lookup requires hdev->lock be held, otherwise the list iteration or param access is not safe. A flaw was found in the Linux kernel's Bluetooth subsystem, specifically within the `hci_sync` component. This vulnerability occurs because the `hci_conn_params_lookup` function does not properly hold a necessary lock (`hdev->lock`) during operations. This oversight can lead to unsafe list iterations or parameter access, potentially resulting in data corruption or system instability. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-414. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
High [CVE-2026-68400] Fix Endpoint Memory Access Descriptor offset calculation
In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Fix Endpoint Memory Access Descriptor offset calculation Use the descriptor's `ep_mem_offset` to calculate the start of the endpoint memory access array and to comply with the FF-A spec instead of defaulting to `sizeof(struct ffa_mem_region)`. This requires moving `ffa_mem_region_additional_setup()` earlier in the setup flow. Also, add sanity checks to ensure the calculated descriptor offsets do not exceed `max_fragsize`. This issue arises from defaulting to a fixed size instead of using the descriptor's specified offset, potentially causing out-of-bounds memory operations. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-823. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux for NVIDIA 26. Red Hat lists Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat OpenShift Container Platform 4 as not affected. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
High [CVE-2026-68117] clear sock->sk on the failed-insert path in tipc_sk_create
In the Linux kernel, the following vulnerability has been resolved: tipc: clear sock->sk on the failed-insert path in tipc_sk_create() When tipc_sk_create() fails to insert the new socket (tipc_sk_insert() returns non-zero), its error path frees the sk with sk_free() but leaves sock->sk pointing at the freed object: if (tipc_sk_insert(tsk)) { sk_free(sk); pr_warn("Socket create failed; port number exhausted\n"); return -EINVAL; } This is harmless for plain socket(): the syscall layer clears sock->ops before releasing, so tipc_release() is never called. It is not harmless on the accept() path. tipc_accept() creates the pre-allocated child socket with tipc_sk_create(net, new_sock, 0, kern); on failure it leaves new_sock->sk dangling and new_sock->ops non-NULL, and do_accept() then fput()s the new file, so __sock_release() -> tipc_release() runs lock_sock(new_sock->sk) on the freed sk -- a use-after-free write of the sk_lock spinlock. tipc_release() already guards this exact "failed accept() releases a pre-allocated child" case with "if (sk == NULL) return 0;", but the guard is bypassed because tipc_sk_create() left sock->sk non-NULL (dangling) rather than NULL. The tipc_sk_insert() failure is reached when the per-netns socket rhashtable hits its max_size (tsk_rht_params.max_size = 1048576, ~2M elements) -- i.e. once a netns holds ~2M TIPC sockets every insert returns -E2BIG.
High [CVE-2026-68147] Avoid dynamic allocation in fscrypt_get_devices
In the Linux kernel, the following vulnerability has been resolved: fscrypt: Avoid dynamic allocation in fscrypt_get_devices() When a blk_crypto_key starts being used or is evicted, fs/crypto/ calls fscrypt_get_devices() to get the filesystem's list of block devices, then iterates over them and calls blk_crypto_config_supported(), blk_crypto_start_using_key(), or blk_crypto_evict_key() on each one. Currently, the block device pointers are placed in a dynamically allocated array. This dynamic allocation is problematic because: - It can fail, especially at the fscrypt_destroy_inline_crypt_key() call site when it's invoked for inode eviction under direct reclaim. - fscrypt_destroy_inline_crypt_key() doesn't handle the failure. It just zeroizes and frees the blk_crypto_key without calling blk_crypto_evict_key(). That causes a use-after-free. For now, let's fix this in the straightforward and easily-backportable way by switching to an on-stack array. Currently the fscrypt multi-device functionality is used only by f2fs, which has a hardcoded limit of 8 block devices. An on-stack array works fine for that. (Of course, this solution won't scale up to large number of block devices. For that we'd need a different solution, like moving the block device iteration into the filesystem.