Red Hat Linux Security Advisories & CVEs
5837 advisories tracked · Red Hat Security Data API · direct feeds checked every minute; rate-limited backstops use a safe source cadence
Android app · Google Play
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 34 official vendor sources and 160+ reviewed platform categories.
Security advisories for your Red Hat release
Pick your distribution release to see every advisory issued for it and its severity mix. Fixes ship as errata — keep the system patched. This is the release's advisory history, not a per-package scan.
Official source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat advisories
Medium [CVE-2026-68475] fix memory region leak on ioremap failure
In the Linux kernel, the following vulnerability has been resolved: reset: sunxi: fix memory region leak on ioremap failure In sunxi_reset_init(), when ioremap() fails, the memory region obtained via request_mem_region() is not released, leading to a resource leak. Add an err_mem_region label to properly release the memory region before freeing the data structure. This oversight can lead to a resource leak within the system. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Medium [CVE-2026-68469] fix permanently busy scans after multiple roam iterations
In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix permanently busy scans after multiple roam iterations In order for the firmware to sleep, the driver has to confirm a previously received sleep request. The normal sequence of evets goes like this: EVENT_SLEEP -> adapter->ps_state = PS_STATE_PRE_SLEEP -> sleep-confirm -> SLEEP -> EVENT_AWAKE -> AWAKE. Before sending the sleep-confirm command, the driver must make sure there are no commands either running or waiting to be completed. mwifiex_ret_802_11_associate() unconditionally sets ps_state = PS_STATE_AWAKE when it processes the association command response, outside of the normal powersave management flow. If EVENT_SLEEP arrives while the association command is in flight, ps_state is PRE_SLEEP when the association command response is parsed, and the forced AWAKE overwrites it. The deferred sleep-confirm is never sent. A subsequent scan_start command is correctly acknowledged, but the firmware doesn't generate scan_result events. The scan request never finishes, and additional requests from userspace fail with -EBUSY. After testing on both IW412 and W8997, I could only trigger the bug on the IW412 and observed the firmwares behave differently. On the IW412 the firmware still sends EVENT_SLEEP while the authentication / association process is ongoing.
Medium [CVE-2026-72054] require CAP_NET_ADMIN in the device netns for changelink
In the Linux kernel, the following vulnerability has been resolved: net: ip_vti: require CAP_NET_ADMIN in the device netns for changelink vti_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate vti_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. An attacker with `CAP_NET_ADMIN` privileges in one network namespace (netns) but not in another, can exploit an insufficient capability check in the `vti_changelink()` function. This allows them to rewrite a Virtual Tunnel Interface (VTI) tunnel that resides in the second network namespace, leading to unauthorized modification of network configurations and potential traffic redirection. This creates a cross namespace authorization bypass after a VTI device is created in or moved to a different network namespace than the request context. For the CVSS the PR:L is used for the paranoid score because CAP_NET_ADMIN in a reduced namespace, container root, or delegated network admin context is not equivalent to full host administrator control.
Medium [CVE-2026-72103] avoid leaking the caller's thread keyring via the table device file
In the Linux kernel, the following vulnerability has been resolved: dm: avoid leaking the caller's thread keyring via the table device file The refactoring in commit a28d893eb327 ("md: port block device access to file") accidentally causes the caller's thread keyring to be kept alive long beyond the caller's lifetime. As a result, "cryptsetup luksSuspend" silently fails to wipe the LUKS volume key from memory. In detail: "cryptsetup luksOpen" uses its supposedly ephemeral thread keyring to pass the volume key to the kernel. dm-crypt's crypt_set_keyring_key() copies the key material into its own crypt_config structure and then drops its own reference to the key in the keyring with key_put(). With this fix, restoring pre-v6.9 behavior, the copy in the thread keyring is then promptly garbage collected, such that exactly one copy of the volume key remains. This single copy is correctly wiped from memory on "cryptsetup luksSuspend". This second copy is only freed on "luksClose". "luksSuspend" neither knows about this copy nor has any way to remove it, so the key remains recoverable from RAM after a suspend that is documented to have wiped it. This fix should not introduce new security problems, as the code is anyway gated by CAP_SYS_ADMIN. The device-mapper core, not the calling task, is the legitimate owner of this long-lived file.
Medium [CVE-2026-72082] Fix refcount leak in efct_hw_io_abort
In the Linux kernel, the following vulnerability has been resolved: scsi: elx: efct: Fix refcount leak in efct_hw_io_abort() When efct_hw_reqtag_alloc() fails in efct_hw_io_abort(), the error path returns -ENOSPC without releasing the reference obtained via kref_get_unless_zero() earlier in the function. All other error paths correctly drop the reference. This causes a permanent reference leak on the io_to_abort object. Additionally, the abort_in_progress flag is left set to true on this path, which means future abort attempts for the same I/O will immediately return -EINPROGRESS even though the abort was never submitted, effectively blocking recovery. Fix this by adding the missing kref_put() call and reset abort_in_progress to false, matching the cleanup done in the efct_hw_wq_write() failure path below. A flaw was found in the Linux kernel's SCSI (Small Computer System Interface) `elx: efct` module. This vulnerability occurs when an I/O abort operation fails to properly release a resource reference. This can lead to a permanent resource leak, which prevents subsequent attempts to abort the same I/O operation. Consequently, this issue can block system recovery and potentially result in a denial of service (DoS) condition. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772.
Medium [CVE-2026-72081] Fix I/O leak on unsupported additional CDB
In the Linux kernel, the following vulnerability has been resolved: scsi: elx: efct: Fix I/O leak on unsupported additional CDB efct_dispatch_fcp_cmd() allocates an efct_io before dispatching an unsolicited FCP command. Free the allocated IO before returning from this error path. When processing an unsolicited Fibre Channel Protocol (FCP) command that contains an unsupported additional Command Descriptor Block (CDB), the system fails to properly free allocated I/O resources. This resource leak can lead to resource exhaustion over time, potentially resulting in a Denial of Service (DoS) for the system. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Medium [CVE-2026-72113] add missing device refcount for CAN filter removal
In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing device refcount for CAN filter removal sashiko-bot remarked a problem with a concurrent device unregistration in isotp.c which also is present in the bcm.c code. A former fix for raw.c commit c275a176e4b6 ("can: raw: add missing refcount for memory leak fix") introduced a netdevice_tracker which solves the issue for bcm.c too. bcm_release(), bcm_delete_rx_op() and bcm_notifier() relied on dev_get_by_index(ifindex) to re-find the device for an rx_op before unregistering its filter. If a concurrent NETDEV_UNREGISTER has already unlisted the device from the ifindex table, that lookup fails and can_rx_unregister() is silently skipped, leaving a stale CAN filter pointing at the soon-to-be-freed bcm_op/socket. Hold a netdev_hold()/netdev_put() tracked reference on op->rx_reg_dev from the moment the rx filter is registered in bcm_rx_setup() until it is unregistered in bcm_rx_unreg(), and use that reference directly in bcm_release() and bcm_delete_rx_op() instead of re-looking the device up by ifindex. A flaw was found in the Linux kernel's Controller Area Network (CAN) Broadcast Manager (BCM) module. This vulnerability arises from a missing device reference count during the removal of CAN filters.
Medium [CVE-2026-68473] correct check for CONFIG_PPC_E500 in mask_user_address
In the Linux kernel, the following vulnerability has been resolved: powerpc/uaccess: correct check for CONFIG_PPC_E500 in mask_user_address() mask_user_address() incorrectly checks for CONFIG_E500 instead of CONFIG_PPC_E500, causing mask_user_address_isel() to not be used on E500 hardware. Fix the check to use the correct name. This error prevents the mask_user_address_isel() function from being used on PowerPC E500 hardware, which could lead to improper handling of user addresses and potentially impact system security or stability. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-1025. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Medium [CVE-2026-72013] Prevent NULL pointer dereference in machine_kexec_prepare
In the Linux kernel, the following vulnerability has been resolved: riscv: Prevent NULL pointer dereference in machine_kexec_prepare() A NULL pointer dereference issue is noticed in riscv's machine_kexec_prepare(), where image->segment[i].buf might be NULL and copied unchecked. The NULL buf comes from ima_add_kexec_buffer(), where kbuf is added by kexec_add_buffer(), but kbuf.buffer is NULL, then it is copied without a check in machine_kexec_prepare(): kexec_file_load -> kimage_file_alloc_init() -> kimage_file_prepare_segments() -> ima_add_kexec_buffer() -> kexec_add_buffer() -> machine_kexec_prepare() -> memcpy() Address this by adding a check before the data copy attempt. Specifically, within the riscv architecture's `machine_kexec_prepare()` function, a NULL pointer dereference can occur. This vulnerability arises when a NULL buffer is copied without proper validation during the kexec preparation process. An attacker could potentially exploit this to cause a system crash, leading to a denial of service. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-476. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Medium [CVE-2026-72094] Fix potential NULL pointer dereference
In the Linux kernel, the following vulnerability has been resolved: dma-buf: dma-fence: Fix potential NULL pointer dereference The commit mentioned in the fixes tag below introduced a mechanism through which fence producers can fully decouple from fence consumers. This, desirable, mechanism is based on the fence's signaled-bit as the "decoupling point". A sophisticated interaction between RCU and atomic instructions attempts to ensure that fence consumers can still interact with fence producers through the dma_fence_ops (callback pointers into the producer). This is the desired behavior: to check for decoupling, the signaled-bit is first checked. If it's not yet signaled, RCU ensures that the ops pointer cannot yet be NULL. Hereby, dma_fence_signal_timestamp_locked() first sets the signaled-bit, and then sets the ops pointer to NULL. These set and load operations could occur out of order on weakly ordered platforms. This problem can be solved very elegantly by using the ops pointer itself as the synchronization point. The pointer is either NULL, or cannot become NULL while it is being used thanks to RCU. Replace the signaled-bit check in dma_fence_timeline_name() and dma_fence_driver_name(). This can lead to a NULL pointer dereference, potentially causing a system crash and resulting in a Denial of Service (DoS).
Medium [CVE-2026-72022] fix SAP refcount leak in llc_ui_autobind
In the Linux kernel, the following vulnerability has been resolved: llc: fix SAP refcount leak in llc_ui_autobind() llc_ui_autobind() opens a SAP after choosing a dynamic LSAP. llc_sap_open() returns a reference owned by the caller, and llc_sap_add_socket() takes a second reference for the socket's membership in the SAP hash tables. llc_ui_bind() drops the caller's reference after adding the socket, but llc_ui_autobind() keeps it. When the socket is closed, llc_sap_remove_socket() releases only the socket reference, leaving the SAP on llc_sap_list with sk_count == 0. This is user-visible because repeated autobind and close cycles can consume all dynamic SAP values and make later autobinds fail with -EUSERS. Drop the caller's reference after a successful autobind, matching llc_ui_bind()'s ownership model. A flaw was found in the Linux kernel's Logical Link Control (LLC) subsystem. The `llc_ui_autobind()` function fails to properly release a reference to a Service Access Point (SAP) after a successful autobind operation. This can result in a denial of service, preventing subsequent autobind operations from succeeding. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-911.
Medium [CVE-2026-72108] dm thin metadata: fix metadata snapshot consistency on commit failure
In the Linux kernel, the following vulnerability has been resolved: dm thin metadata: fix metadata snapshot consistency on commit failure __reserve_metadata_snap() and __release_metadata_snap() modify the superblock's held_root directly in the block_manager's buffer. If the subsequent metadata commit fails, the held_root gets flushed to disk through the abort_transaction path, resulting in inconsistent metadata. Reproducer 1: __reserve_metadata_snap() 1. Create a 2 MiB metadata device and make the region after the 14th block inaccessible, to trigger metadata commit failure in the subsequent reserve_metadata_snap operation. The 14th block will be the shadow destination for the index block. dmsetup create tmeta --table "0 112 linear /dev/sdc 0 112 3984 error" 2. Create a 16 MiB thin-pool dmsetup create tdata --table "0 32768 zero" dd if=/dev/zero of=/dev/mapper/tmeta bs=4k count=1 dmsetup create tpool --table "0 32768 thin-pool /dev/mapper/tmeta \ /dev/mapper/tdata 128 0 1 skip_block_zeroing" 3. Take a metadata snapshot to trigger metadata commit failure and transaction abort. However, the held_root is written to disk, breaking metadata consistency. dmsetup message tpool 0 "reserve_metadata_snap" thin_check v1.2.2 result: Bad reference count for metadata block 6. Expected 2, but space map contains 1. Reproducer 2: __release_metadata_snap() 1. 1 metadata blocks have leaked.
Medium [CVE-2026-72043] Fix missing dirty page tracking in {pte,pmd}_wrprotect
In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect() When hardware page table walker (PTW) is enabled on LoongArch, the CPU may set _PAGE_DIRTY directly in the page table entry during a write TLB miss, without going through the software TLB store handler. The software TLB store handler (tlbex.S:254) sets both _PAGE_DIRTY and_PAGE_MODIFIED together: ori t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED) Since hardware PTW only sets _PAGE_DIRTY, the software-only bit, i.e. _PAGE_MODIFIED is left unchanged. This creates a window where a PTE has _PAGE_DIRTY set (hardware knows the page is dirty) but _PAGE_MODIFIED clear (software is unaware). When fork()/clone() triggers copy-on-write, __copy_present_ptes() calls pte_wrprotect(), which unconditionally clears both the _PAGE_WRITE and _PAGE_DIRTY bits: pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_DIRTY); Since _PAGE_MODIFIED was never set, the dirtiness information is lost completely. Subsequently, when memory pressure triggers page reclaim, page_mkclean() / try_to_unmap() sees the page as clean (i.e. pte_dirty() returns false) and the page may be freed without writeback, causing data corruption.
Medium [CVE-2026-72085] Free unsubmitted command instead of double-putting it
In the Linux kernel, the following vulnerability has been resolved: scsi: xen: scsiback: Free unsubmitted command instead of double-putting it scsiback_get_pend_req() obtains a command tag and returns a vscsibk_pend whose embedded se_cmd has only been memset to 0, so its cmd_kref is 0; the se_cmd is initialised (kref_init() via target_init_cmd()) only later, in scsiback_cmd_exec(), on the successful VSCSIIF_ACT_SCSI_CDB path. The two error paths in scsiback_do_cmd_fn() taken before the command is submitted -- a failed scsiback_gnttab_data_map() and an unknown ring_req.act -- call transport_generic_free_cmd(&pending_req->se_cmd, 0), which kref_put()s a refcount of 0. That underflows it ("refcount_t: underflow; use-after-free") and, as the release function is not run, leaks the command tag. Impact: a pvSCSI guest can leak every command tag of a LUN's session, stopping the LUN, by submitting requests with a bad grant reference or an unknown request type; under panic_on_warn the refcount underflow panics the host. Add a helper that just returns the tag with target_free_tag() and sends the error response. It frees the tag while the v2p reference still pins the session, and snapshots the response fields beforehand because freeing the tag can let another ring reuse the pending_req slot.
Medium [CVE-2026-72016] Fix NULL kobject warning in cpuhp_smt_enable
In the Linux kernel, the following vulnerability has been resolved: cpu/hotplug: Fix NULL kobject warning in cpuhp_smt_enable() On arm64, when booting with `maxcpus` greater than the number of present CPUs (e.g., QEMU -smp cpus=4,maxcpus=8), some CPUs are marked as 'present' but have not yet been registered via register_cpu(). Consequently, the per-cpu device objects for these CPUs are not yet initialized. In cpuhp_smt_enable(), the code iterates over all present CPUs. Calling _cpu_up() for these unregistered CPUs eventually leads to sysfs_create_group() being called with a NULL kobject (or a kobject without a directory), triggering the following warning in fs/sysfs/group.c: WARNING: fs/sysfs/group.c:137 at internal_create_group+0x41c/0x4bc, CPU#2: sh/181 [...] Call trace: internal_create_group+0x41c/0x4bc (P) sysfs_create_group+0x18/0x24 topology_add_dev+0x1c/0x28 cpuhp_invoke_callback+0x104/0x20c __cpuhp_invoke_callback_range+0x94/0x11c _cpu_up+0x200/0x37c When booting with ACPI, arm64 smp_prepare_cpus() currently sets all enumerated CPUs as "present" regardless of their status in the MADT. This causes issues with SMT hotplug control. For instance, with QEMU's "-smp 4,maxcpus=8" configuration, the MADT GICC entries are populated as follows: 1. The first four CPUs: `Enabled` set but `Online Capable` not set. 2.
Medium [CVE-2026-72110] bpf,fork: wipe ->bpf_storage before bailouts that access it
In the Linux kernel, the following vulnerability has been resolved: bpf,fork: wipe ->bpf_storage before bailouts that access it Currently, copy_process() can bail out to free_task() before p->bpf_storage has been initialized, with this call graph (shown here for the!CONFIG_MEMCG case): copy_process dup_task_struct arch_dup_task_struct [copies the entire task_struct, including ->bpf_storage member] [RLIMIT_NPROC check fails] delayed_free_task free_task bpf_task_storage_free rcu_dereference(task->bpf_storage) bpf_local_storage_destroy In this case, the nascent task's ->bpf_storage member that bpf_local_storage_destroy() operates on is a plain copy of the parent's ->bpf_storage pointer, not a real initialized pointer. This leads to badness (kernel hangs, UAF). This is reachable as long as the process calling fork() has been inserted into a task storage map. A local user, by initiating a `fork()` operation from a process within a task storage map, can trigger a condition where the `bpf_storage` is not properly initialized. This can lead to a Use-After-Free (UAF) vulnerability, which occurs when the system attempts to use memory after it has been freed. Exploitation of this flaw could result in kernel hangs or other system instability, effectively causing a denial of service. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825.
Medium [CVE-2026-72106] fix a possible overflow in list_version_get_info
In the Linux kernel, the following vulnerability has been resolved: dm-ioctl: fix a possible overflow in list_version_get_info sizeof(tt->version) is 12 bytes, but the code writes 16 bytes into the output buffer - info->vers->version[0], info->vers->version[1], info->vers->version[2] and info->vers->next. This can cause buffer overflow. Fix this buffer overflow by replacing "sizeof(tt->version)" with "sizeof(struct dm_target_versions)". This vulnerability, a buffer overflow, occurs in the `list_version_get_info` function when the code attempts to write more data than the allocated buffer size. A local attacker could potentially exploit this to cause a denial of service or achieve privilege escalation. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-131. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-72093] Fix use-after-free in amdxdna_gem_dmabuf_mmap
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix use-after-free in amdxdna_gem_dmabuf_mmap() When vm_insert_pages() fails, the error path calls vma->vm_ops->close(vma) which internally calls drm_gem_vm_close() → drm_gem_object_put(), releasing the GEM object reference acquired at the start of the function. However, the close_vma label then falls through to put_obj, which calls drm_gem_object_put() a second time on the same object. If the first put releases the last reference, the object is freed and the second put accesses freed memory, causing a use-after-free. Fix by returning directly from close_vma instead of falling through to put_obj, since the close handler already performs all necessary cleanup including the object put. A flaw was found in the Linux kernel, specifically within the amdxdna graphics driver. This vulnerability is a use-after-free error, where a memory object is incorrectly freed twice when certain memory allocation operations fail. This leads to memory corruption. A local attacker could potentially exploit this flaw to cause a system crash (denial of service) or gain elevated privileges. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825.
Medium [CVE-2026-68460] fix potential deadlock in f2fs_balance_fs
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadlock in f2fs_balance_fs() When the f2fs filesystem space is nearly exhausted, we encounter deadlock issues as below: INFO: task A:1890 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:A state:D stack:0 pid:1890 tgid:1626 ppid:1153 flags:0x00000204 Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 io_schedule+0x44/0x68 folio_wait_bit_common+0x174/0x370 folio_wait_bit+0x20/0x38 folio_wait_writeback+0x54/0xc8 truncate_inode_partial_folio+0x70/0x1e0 truncate_inode_pages_range+0x1b0/0x450 truncate_pagecache+0x54/0x88 f2fs_file_write_iter+0x3e8/0xb80 do_iter_readv_writev+0xf0/0x1e0 vfs_writev+0x138/0x2c8 do_writev+0x88/0x130 __arm64_sys_writev+0x28/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 INFO: task kworker/u8:11:2680853 blocked for more than 120 seconds.
Medium [CVE-2026-72127] report NAPI thread PID in the caller's pid namespace
In the Linux kernel, the following vulnerability has been resolved: netdev-genl: report NAPI thread PID in the caller's pid namespace netdev_nl_napi_fill_one() reports the NAPI kthread PID in NETDEV_A_NAPI_PID using task_pid_nr(), which returns the PID in the initial pid namespace. NETDEV_CMD_NAPI_GET does not have GENL_ADMIN_PERM and the netdev genl family is netnsok, so a caller in a child pid namespace can issue it. That caller then sees the kthread's global PID, even though the kthread is not visible in its pid namespace, where the value should be 0. Translate the PID through the caller's pid namespace, the same way commit 3799c2570982 ("io_uring/fdinfo: translate SqThread PID through caller's pid_ns") did for the io_uring SQPOLL thread. The doit and dumpit paths both run synchronously in the caller's context, so task_active_pid_ns(current) is the caller's pid namespace. A local user in a child process ID (PID) namespace can issue a `NETDEV_CMD_NAPI_GET` command. This could lead to an information disclosure, potentially bypassing PID namespace isolation. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-272. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.