Red Hat Linux Security Advisories & CVEs
12207 advisories tracked · Red Hat Security Data API · direct feeds checked every minute; rate-limited backstops use a safe source cadence
Android app · Google Play
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 34 official vendor sources and 160+ reviewed platform categories.
Security advisories for your Red Hat release
Pick your distribution release to see every advisory issued for it and its severity mix. Fixes ship as errata — keep the system patched. This is the release's advisory history, not a per-package scan.
Official source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat advisories
High [CVE-2026-74682] fix OOB write on Type II inbound URBs
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write on Type II inbound URBs data_ep_set_params() sizes each URB transfer buffer before it adds the Format Type II transfer delimiter: u->packets = urb_packs; u->buffer_size = maxsize * u->packets; if (fmt->fmt_type == UAC_FORMAT_TYPE_II) u->packets++; /* for transfer delimiter */ u->urb = usb_alloc_urb(u->packets, GFP_KERNEL); buffer_size is computed from the pre-increment packet count and never recomputed, so for a Type II endpoint the buffer is one packet short of the packet count the URB is built with. prepare_inbound_urb() then lays out one iso frame per packet and never consults buffer_size: offs = 0; for (i = 0; i packets; i++) { urb->iso_frame_desc[i].offset = offs; urb->iso_frame_desc[i].length = ep->curpacksize; offs += ep->curpacksize; } urb->transfer_buffer_length = offs; urb->number_of_packets = urb_ctx->packets; The last descriptor therefore points one packet past the end of the transfer buffer, where the host controller writes device data on every inbound transfer. prepare_silent_urb() and prepare_playback_urb() bound their fill loops by ctx->buffer_size, so only capture is affected. fmt_type comes from the device's audio streaming descriptors, so any device advertising a Type II capture format hits this once userspace sets hw_params on the stream.
High [CVE-2026-74587] fix use-after-free of cached ASCONF chunk
In the Linux kernel, the following vulnerability has been resolved: sctp: fix use-after-free of cached ASCONF chunk addip_last_asconf caches the outstanding outbound ASCONF chunk. The normal ASCONF-ACK completion path releases the chunk and clears the pointer. However, sctp_asconf_queue_teardown() releases the cached chunk without clearing addip_last_asconf. During peer restart handling, sctp_sf_do_dupcook_a() queues SCTP_CMD_PURGE_ASCONF_QUEUE, which invokes sctp_asconf_queue_teardown() while the association remains alive and leaves the pointer dangling. A delayed authenticated ASCONF-ACK can then reach sctp_sf_do_asconf_ack(), which accesses the stale chunk and passes it to sctp_process_asconf_ack(), causing a use-after-free and a second release. Clearing the pointer exposes a race with T4 expiry. Peer restart handling queues the timer stop before the purge, but SCTP_CMD_TIMER_STOP uses timer_delete(), which does not wait for a callback already running on another CPU. Such a callback can reach sctp_sf_t4_timer_expire() after the purge and dereference NULL. Clear addip_last_asconf after releasing the cached chunk, and make sctp_sf_t4_timer_expire() consume a stale T4 expiry if no outstanding ASCONF remains. A flaw was found in the Linux kernel's Stream Control Transmission Protocol (SCTP) implementation.
High [CVE-2026-74594] Shut down rtpoll_timer in psi_cgroup_free
In the Linux kernel, the following vulnerability has been resolved: sched/psi: Shut down rtpoll_timer in psi_cgroup_free() psi_schedule_rtpoll_work() is called locklessly from the scheduler hotpath and can race psi_trigger_destroy() taking down the last rtpoll trigger under rtpoll_trigger_lock: psi_schedule_rtpoll_work() psi_trigger_destroy() rcu_read_lock(); task = rcu_dereference(rtpoll_task); rcu_assign_pointer(rtpoll_task, NULL); timer_delete(&rtpoll_timer); mod_timer(&rtpoll_timer,...); rcu_read_unlock(); synchronize_rcu(); kthread_stop(task_to_destroy); The group can then be freed with the re-armed timer still pending, and poll_timer_fn() runs on freed memory. 461daba06bdc ("psi: eliminate kthread_worker from psi trigger scheduling mechanism") deleted the timer synchronously after the synchronize_rcu(), which prevented this but raced trigger creation instead: the deletion could cancel the timer that a new trigger set armed during the grace period and, as creation also reinitialized the timer at the time, corrupt it. 8f91efd870ea ("psi: Fix race between psi_trigger_create/destroy") moved the initialization into group_init() and the deletion into the locked section, trading the creation races for the window above. Neither placement in the destruction path works. Affected products named by the advisory: Red Hat Enterprise Linux 8; Red Hat package: kernel-rt.
High [CVE-2026-74641] bound the hwdep mmap fault offset
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: bound the hwdep mmap fault offset snd_us428ctls_vm_fault() turns the faulting page offset into a kernel address with no bound of any kind: offset = vmf->pgoff us428ctls_sharedmem + offset; page = virt_to_page(vaddr); get_page(page); vmf->page = page; return 0; snd_us428ctls_mmap() checks only the length of the mapping, never the offset, and us428ctls_sharedmem is a single page from alloc_pages_exact(). For a character device file_mmap_size_max() returns ULONG_MAX, so the mm layer imposes no ceiling either. Every page offset above zero resolves to a struct page outside the object, and the handler installs it into the caller's address space read-write; the vma is not marked read-only. The caller picks the page frame with a single mmap() argument and gets read-write access to a page of kernel memory it does not own; an offset that lands in an unpopulated vmemmap region oopses instead. A process that can open the hwdep node of an attached US-X2Y reaches this after loading the FPGA image through the same node; no capability check is involved. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; and 1 more.
High [CVE-2026-74688] clear control chunk transport if it is being removed
In the Linux kernel, the following vulnerability has been resolved: sctp: clear control chunk transport if it is being removed sctp_make_heartbeat_ack() caches the destination transport in chunk->transport without taking a reference. When src_out_of_asoc_ok is enabled, the HEARTBEAT ACK may remain queued on control_chunk_list instead of being transmitted immediately. If the peer transport is removed while the chunk is still queued, sctp_assoc_rm_peer() drops the transport and schedules it for RCU freeing, but only clears cached transport pointers in out_chunk_list. The queued control chunk therefore retains a dangling transport pointer. Fix this by also clearing chunk->transport for queued control chunks in control_chunk_list when removing the transport. A flaw was found in the Linux kernel's Stream Control Transmission Protocol (SCTP) implementation. A remote attacker could exploit this use-after-free condition by triggering the transmission of the queued control chunk, potentially leading to a denial of service or arbitrary code execution. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6.
High [CVE-2026-74721] Fix page-insertion errors in amdxdna_insert_pages
In the Linux kernel, the following vulnerability has been resolved: accel/amxdna: Fix page-insertion errors in amdxdna_insert_pages() Two error paths in amdxdna_insert_pages() called vma->vm_ops->close(vma) before returning an error code to the caller. This is incorrect: amdxdna_gem_obj_mmap() registers an HMM interval notifier before calling amdxdna_insert_pages(), and on a hard error it jumps to hmm_unreg to undo that registration. Calling vm_ops->close() manually — which drops the shmem pages_pin_count and the GEM object reference that backs the VMA — before the mmap syscall has even returned causes those resources to be released while the VMA is still alive. The kernel VMA teardown will call vm_ops->close() a second time when the process later unmaps the range, producing a reference count underflow. Replace both hard-error returns with a deferred-fault approach that keeps the VMA alive and retries page insertion through the HMM range-fault path. Specifically, an error in the `amdxdna_insert_pages()` function causes system resources to be released too early. This premature release can lead to a critical error when the system later attempts to free the same resources, resulting in a reference count underflow. This vulnerability could allow a local attacker to cause the system to crash, leading to a denial of service.
High [CVE-2026-74616] reject clones that overrun skb_shared_info tailroom
In the Linux kernel, the following vulnerability has been resolved: xdp: reject clones that overrun skb_shared_info tailroom xdpf_clone() clones broadcast copies into a single page and sets frame_sz to PAGE_SIZE. __xdp_build_skb_from_frame() later treats that page like a normal XDP frame and expects the usual skb_shared_info tailroom at the end of the buffer. The current check only rejects frames whose linear xdp_frame header, headroom, and packet data exceed PAGE_SIZE. A source frame backed by a larger allocation can still satisfy that check while extending into the clone's required shared-info area. When such a clone is converted back into an skb, build_skb_around() places skb_shared_info over live packet bytes and later writes can corrupt XDP return metadata. Reject clones unless their linear area fits inside SKB_WITH_OVERHEAD(PAGE_SIZE), matching the tailroom requirement already enforced by the XDP-to-skb conversion path. A flaw was found in the Linux kernel's XDP (eXpress Data Path) component. When XDP frames are cloned, a specially crafted frame can cause the `skb_shared_info` structure to overwrite live packet data. This improper handling of memory during frame cloning can lead to corruption of XDP return metadata, potentially resulting in system instability or a denial of service. Red Hat severity: Important — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H).
High [CVE-2026-74662] publish queues before arming timer
In the Linux kernel, the following vulnerability has been resolved: inet: frags: publish queues before arming timer inet_frag_create() arms the fragment queue timer before inserting the queue into the fqdir rhashtable. If the namespace fragment timeout is zero or negative, the timer can run before the queue is published. The timer callback then marks the queue complete, tries to remove a node that is not in the hash table yet, and drops the anticipated hash reference. Creation can subsequently publish the completed queue without restoring that reference, leaving a stale hash node after the caller drops the remaining reference. Publish the queue first and arm the timer while holding the queue lock. This makes timer expiry wait until the queue is visible in the hash table, so inet_frag_kill() can remove the node and balance the hash reference. A flaw was found in the Linux kernel's internet fragmentation (inet: frags) code. A race condition exists where the fragment queue timer can be activated before the queue is properly registered. This premature timer activation can lead to an inconsistent state, resulting in a stale hash node. This issue may cause memory corruption or resource exhaustion, potentially leading to a system crash or Denial of Service (DoS). Red Hat severity: Important — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-367.
High [CVE-2026-74611] restore msg_iter before TLS 1.3 optimistic retry
In the Linux kernel, the following vulnerability has been resolved: tls: rx: restore msg_iter before TLS 1.3 optimistic retry tls_decrypt_sg() advances msg->msg_iter when it maps user pages for the optimistic TLS 1.3 zero-copy path. If the decrypted record turns out not to be unpadded application data, tls_decrypt_sw() retries into a kernel skb, but leaves the iterator advanced. The subsequent copy from the skb then writes decrypted bytes again at a later point in the caller iovecs while recvmsg() reports only the post-retry length. A TLS peer can trigger this after the receiver enables TLS_RX_EXPECT_NO_PAD. Revert the iterator by the number of bytes consumed by the optimistic mapping before retrying without zero-copy. Add a selftest which sends a TLS 1.3 control record with TLS_RX_EXPECT_NO_PAD enabled and verifies that recvmsg() does not overwrite later iovecs beyond the returned length. A flaw was found in the Linux kernel's Transport Layer Security (TLS) 1.3 implementation. When processing TLS 1.3 records with optimistic zero-copy enabled, the tls_decrypt_sg() function fails to properly restore the message iterator during a retry. A remote attacker, by sending a specially crafted TLS 1.3 control record, can exploit this to cause the kernel to write decrypted data to unintended memory locations. This can lead to data corruption or potentially information disclosure.
High [CVE-2026-74639] re-anchor capture URBs on resubmission
In the Linux kernel, the following vulnerability has been resolved: ALSA: us144mkii: re-anchor capture URBs on resubmission capture_urb_complete() resubmits each capture URB without anchoring it: usb_get_urb(urb); ret = usb_submit_urb(urb, GFP_ATOMIC); Anchoring is a property of a submission, not of the URB. The giveback path calls usb_unanchor_urb() before urb->complete(), so an URB resubmitted from its own completion handler is off the anchor. The capture URBs are anchored once, at stream start, so from the first completion onward tascam->capture_anchor is empty. tascam_free_urbs(), tascam_disconnect(), tascam_suspend() and the stop-work path all call usb_kill_anchored_urbs(&tascam->capture_anchor) to reap the capture URBs before anything is freed. With the anchor empty those calls return immediately and the URBs stay queued on the host controller. tascam_free_urbs() then returns the capture transfer buffers with usb_free_coherent(), and snd_card_free() releases the snd_card allocation that embeds tascam (card->private_data). The controller completes the queued URBs afterwards, writing device-supplied data into the freed transfer buffer, and capture_urb_complete() dereferences the freed driver object. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
High [CVE-2026-74630] prevent in6_dev_get from resurrecting inet6_dev
In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent in6_dev_get() from resurrecting inet6_dev in6_dev_get() reads dev->ip6_ptr under RCU and then unconditionally increments its refcount. Device teardown can clear the pointer and drop the last reference between these operations. The increment then resurrects an object whose RCU free has already been queued, so callers can use it after it is freed. Use refcount_inc_not_zero() and return NULL when the object has already reached zero. RCU keeps the memory accessible through the attempted reference acquisition, and a successful increment pins the object for the caller. An independent run on the exact unpatched 6f5156d7a31a (v7.2-rc3) kernel reproduced the invalid reference acquisition as UID 1000: refcount_t: addition on 0; use-after-free. ip6_mc_source+0xef4/0x17e0 It was followed by the corresponding reference underflow in ip6_mc_source(). The supplied trace from the same unpatched revision additionally shows the access after the RCU read-side section ends: BUG: KASAN: slab-use-after-free in mutex_lock+0x76/0xe0 Write of size 8 at addr ffff888015b50240 by task poc/1219 Bug found and triaged by OpenAI Security Research and validated by Trail of Bits.
High [CVE-2026-74697] Disable EOP for TPA on all chips to prevent data corruption
In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Disable EOP for TPA on all chips to prevent data corruption EOP (End of frame padding) on the AGG ring may cause overlapping of zero padding at the end of one segment with the next segment's data. If Relaxed Ordering (RO) is enabled, the zero padding may overwrite valid data in the next segment and corrupt the data. Older chips (P5 and older) do not automatically disable RO when EOP is enabled. On some ARM systems, data corruption was reported on 57508 (P5) chips with RO enabled. On older network chips, if Relaxed Ordering (RO) is active, this overlap can cause valid data to be overwritten with zeros. This can lead to data corruption, impacting the integrity of information processed by the system. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-805. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
High [CVE-2026-74640] fix OOB write in fcp_meter_ctl_get
In the Linux kernel, the following vulnerability has been resolved: ALSA: FCP: fix OOB write in fcp_meter_ctl_get() fcp_ioctl_set_meter_map() bounds the user-supplied Level Meter map size by the driver's own limit of 255 if (map.map_size 255 || map.meter_slots 255) return -EINVAL; and passes it to fcp_add_new_ctl() as the control's channel count, where it is stored as elem->channels. Every control read writes into struct snd_ctl_elem_value, whose integer array is declared long value[128], so the limit is 128, not 255. fcp_meter_ctl_get() stores one 64-bit word per channel into that array with no bound of its own: for (i = 0; i channels; i++) { int idx = private->meter_level_map[i]; int value = idx value.integer.value[i] = value; } snd_ctl_elem_read_user() serves that object from memdup_user(_control, sizeof(*control)), 1224 bytes on LP64 out of kmalloc-2048. offsetof(struct snd_ctl_elem_value, value) is 72, so element i is written at byte 72 + 8 * i and element 144 already lands past the allocation. At map_size 255 the last store ends at byte 2112, 888 bytes past the object and 64 bytes into the adjacent slab object. The stored words come from the device and meter_level_map[] selects which word lands in which slot, so extent and contents are both controlled.
High [CVE-2026-74674] fix incorrect flush address in direct page table reclaim
In the Linux kernel, the following vulnerability has been resolved: mm: fix incorrect flush address in direct page table reclaim When zap_pte_range reclaims a page table, it does: pte_free_tlb(tlb, pmd_pgtable(pmdval), addr); and this is unconditionally wrong: if this code executes, addr *always* points one past the end of the range covered by the table. The addr parameter is used to flush the TLB (really the paging-structure-cache) to drop references to the to-be-freed table, and any architecture that cares about the parameter will flush the wrong address. (But they'll still free the correct page). I think it's worth contemplating why the kernel works at all. If we hit the offending line of code, we will first clear the PMD entry (line 1954, zap_empty_pte_table), then we will issue pending flushes if force_flush is set (tlb_flush_mmu_tlbonly(tlb)), then we will skip the retry on line 1979 (phew!), and then we will do the offending pte_free_tlb call. *Or* we will clear the PMD entry immediately before pte_free_tlb (line 1983, zap_pte_table_if_empty). If we have any pending flushes (i.e. we actually zapped any last-level entries) at the time we clear the PMD entry, then the flush really ought to flush all references to the table (Linus certainly seems to think it will on all architectures [0]).
High [CVE-2026-74724] avoid out-of-bounds write in ip_vs_nat_icmp
In the Linux kernel, the following vulnerability has been resolved: ipvs: avoid out-of-bounds write in ip_vs_nat_icmp Sashiko warns that local attacker can modify the packet while it is processed by IPVS. Some places read the IP ihl field multiple times which can cause out-of-bounds access. One such place is ip_vs_nat_icmp where we can write after the validated area. Fix it by providing ciph argument just like it is done for IPv6 and use ciph->len as offset to the embedded transport header. Modify some IPv4 header checks by reading the ihl field only once. A flaw was found in the Linux kernel's IPVS (IP Virtual Server) component. A local attacker can exploit this vulnerability by manipulating packets processed by IPVS, specifically within the `ip_vs_nat_icmp` function. This manipulation can lead to an out-of-bounds write due to improper handling of the IP header length field. This allows the attacker to write data beyond the intended memory area, potentially corrupting data or leading to further system compromise. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-787. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6.
High [CVE-2026-74612] fix skb length accounting after XDP frag adjustment
In the Linux kernel, the following vulnerability has been resolved: veth: fix skb length accounting after XDP frag adjustment veth exposes non-linear skb fragments through an xdp_buff. If an XDP program adjusts the fragment area, veth_xdp_rcv_skb() copies xdp_frags_size back to skb->data_len but leaves skb->len containing the old fragment contribution. After a fragment shrink, this makes skb_headlen() larger than the actual linear area. In the reproduced UDP receive path, __skb_datagram_iter() copied 1024 bytes past the actual linear tail to userspace, starting at struct skb_shared_info. The copied bytes included the affected skb's nr_frags, xdp_frags_size, and a kernel pointer from skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same amount and truncated at the end. Subtract the old data_len before replacing it and add the new data_len afterwards, keeping skb->len and skb->data_len synchronized. Additionally, bpf_xdp_pull_data() can advance data_end while leaving frags present. The skb is then still non-linear, so the old __skb_put(skb, off) triggers SKB_LINEAR_ASSERT(). Use skb_set_tail_pointer() and update skb->len explicitly instead, following bpf_prog_run_generic_xdp(). Unlike __skb_put(), skb_set_tail_pointer() does not require a linear skb. A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by 1024 bytes from its fragment area.
High [CVE-2026-74660] pin the NFLOG backend
In the Linux kernel, the following vulnerability has been resolved: netfilter: ebt_nflog: pin the NFLOG backend nf_log_unregister() runs after the per-net teardown so its final RCU grace period also drains readers that obtained the logger from a per-net binding. However, ebt_nflog passes an explicit ULOG log type to nf_log_packet() without holding a reference on the selected logger module, unlike the xt_NFLOG and nft_log frontends. An ebtables nflog rule can therefore remain callable while nfnetlink_log is unloaded. The resulting interleaving is: CPU 0 CPU 1 nfnetlink_log_fini() unregister_pernet_subsys() kfree(nfnl_log_pernet(net)) ebt_nflog_tg() nf_log_packet() nfulnl_log_packet() instance_lookup_get_rcu() The global ULOG logger is still registered at this point, so CPU 1 dereferences the per-net state after CPU 0 has freed it. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; and 1 more.
High [CVE-2026-74692] fix TOCTOU race between smc_listen_out and listener close
In the Linux kernel, the following vulnerability has been resolved: net/smc: fix TOCTOU race between smc_listen_out() and listener close smc_listen_out() reads lsmc->sk.sk_state without the listener lock, then acquires lock_sock_nested() only after the check passes. This opens a window where smc_close_active() can transition the listener to SMC_CLOSED, call smc_close_cleanup_listen() to drain the accept queue, and release the lock, all between the lockless read and the delayed lock acquisition: smc_listen_work (smc_hs_wq) smc_close_active() ------------------------------- ------------------------- release_sock(child) if (sk_state == SMC_LISTEN) TRUE lock_sock(listener) sk_state = SMC_CLOSED smc_close_cleanup_listen() release_sock(listener) flush_work(tcp_listen_work) lock_sock_nested(listener) smc_accept_enqueue(listener, child) /* child enqueued on dead listener */ smc_close_active() flushes only tcp_listen_work. Work items already dispatched onto smc_hs_wq for the CLC handshake continue running unguarded. smc_accept_enqueue() takes a sock_hold() on the child that is never released, so the child smc_sock, its clcsock, and the reference all leak. A remote peer that opens TCP connections while the server calls close() can exhaust kernel memory. Move lock_sock_nested() to before the sk_state check so that the test and the enqueue are atomic under the listener lock.
High [CVE-2026-74610] don't leave a full plaintext sk_msg ring unpushed
In the Linux kernel, the following vulnerability has been resolved: tls: don't leave a full plaintext sk_msg ring unpushed When the copy path in tls_sw_sendmsg_locked() adds the fragment that fills the plaintext sk_msg ring, it does not set full_record, so the record is left full and unpushed. A later splice() then adds to an already full ring: sk_msg_page_add() has no fullness check of its own, so sg.end wraps onto sg.start and the ring appears empty. Fragments added after that overwrite live entries, and sg.size no longer matches what is reachable between sg.start and sg.end, so pushing the record runs the scatterwalk off the end of the scatterlist. An unprivileged user can trigger this on a loopback TCP socket with the "tls" ULP attached: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:memcpy_from_scatterwalk+0x32/0xc0 Call Trace: skcipher_walk_next+0x1d1/0x2c0 gcm_encrypt_aesni_avx+0x1e9/0x220 bpf_exec_tx_verdict+0x3bb/0x860 tls_sw_sendmsg+0xa1a/0xca0 __sys_sendto+0x1da/0x1f0 Set full_record in the copy path when the ring becomes full, and push a record that is already full on entry to the sendmsg loop. A flaw was found in the Linux kernel's Transport Layer Security (TLS) implementation. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat package: kernel.
High [CVE-2026-74705] fix potential use-after-free in tunnel segmentation
In the Linux kernel, the following vulnerability has been resolved: udp: fix potential use-after-free in tunnel segmentation __skb_udp_tunnel_segment() gets the UDP header before ensuring the tunnel header is in the skb head. If the pull reallocates skb->head, the saved UDP header pointer is no longer valid. This vulnerability arises when the system attempts to process network packets, specifically in the __skb_udp_tunnel_segment() function. An attacker could potentially exploit a use-after-free condition, where the system attempts to use memory that has already been released, leading to system instability or potentially arbitrary code execution. Red Hat severity: Important — CVSS 8.8 (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-416. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.