Red Hat Linux Security Advisories & CVEs
6007 advisories tracked · Red Hat Security Data API · direct feeds checked every minute; rate-limited backstops use a safe source cadence
Android app · Google Play
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 34 official vendor sources and 160+ reviewed platform categories.
Security advisories for your Red Hat release
Pick your distribution release to see every advisory issued for it and its severity mix. Fixes ship as errata — keep the system patched. This is the release's advisory history, not a per-package scan.
Official source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat advisories
Medium [CVE-2026-53373] do not try to unmap a VMA if mmap_prepare invoked from mmap
In the Linux kernel, the following vulnerability has been resolved: mm/vma: do not try to unmap a VMA if mmap_prepare() invoked from mmap() The mmap_prepare hook functionality includes the ability to invoke mmap_prepare() from the mmap() hook of existing 'stacked' drivers, that is ones which are capable of calling the mmap hooks of other drivers/file systems (e.g. overlayfs, shm). As part of the mmap_prepare action functionality, we deal with errors by unmapping the VMA should one arise. This works in the usual mmap_prepare case, as we invoke this action at the last moment, when the VMA is established in the maple tree. However, the mmap() hook passes a not-fully-established VMA pointer to the caller (which is the motivation behind the mmap_prepare() work), which is detached. So attempting to unmap a VMA in this state will be problematic, with the most obvious symptom being a warning in vma_mark_detached(), because the VMA is already detached. It's also unncessary - the mmap() handler will clean up the VMA on error. So to fix this issue, this patch propagates whether or not an mmap action is being completed via the compatibility layer or directly. If the former, then we do not attempt VMA cleanup, if the latter, then we do. This patch also updates the userland VMA tests to reflect the change. A flaw was found in the Linux kernel's memory management (mm/vma) component.
Medium [CVE-2026-53378] Fix blob property reference tracking in state lifecycle
In the Linux kernel, the following vulnerability has been resolved: drm/colorop: Fix blob property reference tracking in state lifecycle The colorop state blob property handling had memory leaks during state duplication, destruction, and reset operations. The implementation failed to follow the established pattern from drm_crtc's handling of DEGAMMA/GAMMA blob properties. Issues fixed: - drm_colorop_atomic_destroy_state() was freeing state memory without releasing the blob reference, causing a leak - drm_colorop_reset() was directly freeing old state with kfree() instead of properly destroying it, leaking blob references - drm_colorop_cleanup() had duplicate blob cleanup code Changes: - Add __drm_atomic_helper_colorop_destroy_state() helper to properly release blob references before freeing state memory - Update drm_colorop_atomic_destroy_state() to call the helper - Fix drm_colorop_reset() to use drm_colorop_atomic_destroy_state() for proper cleanup of old state - Simplify drm_colorop_cleanup() to use the common destruction path This matches the well-tested pattern used by drm_crtc since 2016 and ensures proper reference counting throughout the state lifecycle. Co-developed by Claude Sonnet 4.5. A flaw was found in the Linux kernel's Direct Rendering Manager (DRM) color operation module (drm/colorop).
Medium [CVE-2026-53379] free control handler on error in ov8856_init_controls
In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov8856: free control handler on error in ov8856_init_controls() The control handler wasn't freed if adding controls failed, add an error exit label and convert the existing error return to use it. This vulnerability occurs due to improper error handling where a control handler is not correctly released if an error occurs during its initialization. This oversight could potentially lead to resource exhaustion, which may result in a denial of service (DoS) condition, making the system unavailable to legitimate users. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
Medium [CVE-2026-53376] Add upper bound check for num_of_nodes
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add upper bound check for num_of_nodes drm/amdkfd: Add upper bound check for num_of_nodes in kfd_ioctl_get_process_apertures_new. (cherry picked from commit 98ff46a5ea090c14d2cdb4f5b993b05d74f3949f) A flaw was found in the AMD Kernel Fusion Driver (AMDKFD) in the Linux kernel. This vulnerability exists in the `kfd_ioctl_get_process_apertures_new` function, where a missing upper bound check for the `num_of_nodes` argument could allow a local attacker to provide an excessively large value. This could lead to an out-of-bounds read or write, potentially resulting in information disclosure or a denial of service to the system. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-125. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-53375] Prevent partial address patches
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vce: Prevent partial address patches In the case that only one of lo/hi is valid, the patching could result in a bad address written to in FW. A flaw was found in the Linux kernel, specifically within the drm/amdgpu/vce component responsible for video encoding. This vulnerability arises when the system attempts to update a memory address using incomplete information, where only a portion of the address is valid. This can result in data being written to an unintended memory location in the firmware, which could allow an attacker to execute unauthorized code or disrupt system operations. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-787. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-53400] fix adapter registration race
In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix adapter registration race Adapters can be looked up based on their id using i2c_get_adapter() which takes a reference to the embedded struct device. Make sure that the adapter (including its struct device) has been initialised before adding it to the IDR to avoid accessing uninitialised data which could, for example, lead to NULL-pointer dereferences or use-after-free. Note that the i2c-dev chardev, which is registered from a bus notifier, currently uses i2c_get_adapter() so the adapter needs to be added to the IDR before registration. A flaw was found in the Linux kernel, specifically within its I2C (Inter-Integrated Circuit) core component. This vulnerability arises from a timing issue during the registration of I2C adapters, where an adapter could be accessed before it is fully prepared. This premature access to uninitialized data may lead to system instability, crashes, or a denial of service (DoS). Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-824. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-53385] fix null-ptr-deref in vcs_notifier during concurrent vcs_write
In the Linux kernel, the following vulnerability has been resolved: vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write A KASAN null-ptr-deref was observed in vcs_notifier(): BUG: KASAN: null-ptr-deref in vcs_notifier+0x98/0x130 Read of size 2 at addr qmp_cmd_name: qmp_capabilities, arguments: {} The issue is a race condition in vcs_write(). When the console_lock is temporarily dropped (to copy data from userspace), the vc_data pointer obtained from vcs_vc() may become stale. After re-acquiring the lock, vcs_vc() is called again to re-validate the pointer. If the vc has been deallocated in the meantime, vcs_vc() returns NULL, and the while loop breaks (with written > 0). However, after the loop, vcs_scr_updated(vc) is still called with the now-NULL vc pointer, leading to a null pointer dereference in the notifier chain (vcs_notifier dereferences param->vc). Fix this by adding a NULL check for vc before calling vcs_scr_updated(). A race condition in the `vcs_write()` function can lead to a null pointer dereference. This occurs when the `vc_data` pointer becomes stale during concurrent write operations, and a subsequent call attempts to use the now-invalid pointer. A local attacker could exploit this vulnerability to cause a system crash, resulting in a Denial of Service (DoS).
Medium [CVE-2026-63809] use kvfree for replaced sysctl write buffer
In the Linux kernel, the following vulnerability has been resolved: bpf: use kvfree() for replaced sysctl write buffer proc_sys_call_handler() allocates its temporary sysctl buffer with kvzalloc() and passes it to __cgroup_bpf_run_filter_sysctl(). Since kvzalloc() may fall back to vmalloc() for large allocations, freeing that buffer with kfree() is wrong and can corrupt memory. Use kvfree() to safely handle both kmalloc and kvzalloc()/vmalloc allocations. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc5. Reproduced the bug based on v7.1-rc4 in a QEMU x86_64 guest booted with KASAN and CONFIG_FAILSLAB enabled. To exercise the replacement path, the test tree also included the accompanying fix for the stale ret == 1 check in __cgroup_bpf_run_filter_sysctl(). The reproducer confines failslab injections to the proc_sys_call_handler() range, uses stacktrace-depth=32, and injects fail-nth=1 while writing 8191 bytes to /proc/sys/kernel/domainname from a task in the target cgroup. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
Medium [CVE-2026-63804] fix use-after-free in gfs2_qd_dealloc
In the Linux kernel, the following vulnerability has been resolved: gfs2: fix use-after-free in gfs2_qd_dealloc gfs2_qd_dealloc(), called as an RCU callback from gfs2_qd_dispose(), accesses the superblock object sdp through qd->qd_sbd after freeing qd. It does so to decrement sd_quota_count and wake up sd_kill_wait. However, by the time the RCU callback runs, gfs2_put_super() may have already freed sdp via free_sbd(). This can happen when gfs2_quota_cleanup() is called during unmount: it disposes of quota objects via call_rcu() and then waits on sd_kill_wait with a 60-second timeout. If the timeout expires, or if gfs2_gl_hash_clear() triggers additional qd_put() calls that schedule more RCU callbacks after the wait completes, gfs2_put_super() will proceed to free the superblock while RCU callbacks referencing it are still pending. Add an rcu_barrier() before free_sbd() in gfs2_put_super() to ensure all pending RCU callbacks (including gfs2_qd_dealloc) have completed before the superblock is freed. A flaw was found in the Linux kernel's GFS2 file system. This use-after-free vulnerability occurs when the `gfs2_qd_dealloc` function attempts to access memory that has already been released during the unmounting process. This can lead to system instability or crashes, potentially resulting in a denial of service for affected systems.
Medium [CVE-2026-63832] add wcid publish check in mt76_sta_add
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: add wcid publish check in mt76_sta_add Since mt7925_mac_sta_add publishes wcid, add publish check in mt76_sta_add to avoid reinitializing the wcid->poll_list. Found dev->sta_poll_list corruption when using mt7925 and 7.1-rc4. According to the corruption information, prev->next was changed to itself. wlan0: disconnect from AP 90:fb:5d:94:8b:e3 for new auth to 90:fb:5d:94:8b:e2 wlan0: authenticate with 90:fb:5d:94:8b:e2 (local address=84:9e:56:9c:7e:6b) wlan0: send auth to 90:fb:5d:94:8b:e2 (try 1/3) slab kmalloc-8k start ffff8c80958a6000 pointer offset 4160 size 8192 list_add corruption. prev->next should be next (ffff8c808a7488f8), but was ffff8c80958a7040. (prev=ffff8c80958a7040). mt76_wcid_add_poll+0x95/0xd0 [mt76] mt7925_mac_add_txs.part.0+0xa5/0xe0 [mt7925_common] mt7925_rx_check+0xa7/0xc0 [mt7925_common] mt76_dma_rx_poll+0x50d/0x790 [mt76] mt792x_poll_rx+0x52/0xe0 [mt792x_lib] This vulnerability occurs due to improper handling of Wi-Fi station additions, where the driver fails to adequately verify existing client connections. A remote attacker could exploit this by manipulating Wi-Fi authentication processes, leading to corruption of internal kernel data structures. This corruption can cause system instability and a denial of service, making the affected system unresponsive.
Medium [CVE-2026-53403] Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var
In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var info->var, a framebuffer's current mode, is expected to have a matching entry in info->modelist. var_to_display() relies on this and treats a failed fb_match_mode() as "This should not happen". fb_set_var() keeps it true by adding the mode to the list on every change, and do_register_framebuffer() does the same at registration. store_modes() replaces the modelist from userspace. fb_new_modelist() validates the new modes but does not check that info->var still has a match. It relies on fbcon_new_modelist() to re-point consoles, but that only handles consoles mapped to the framebuffer. With fbcon unbound there are none, so info->var is left describing a mode that is no longer in the list. A later console takeover runs var_to_display(), where fb_match_mode() returns NULL and leaves fb_display[i].mode NULL. fbcon_switch() passes it to display_to_var(), and fb_videomode_to_var() dereferences the NULL mode. When a new modelist is set from userspace, the fb_new_modelist function fails to ensure that the current framebuffer mode remains valid within the updated list. This can lead to a null-pointer dereference if a console attempts to take over, resulting in a system crash and a Denial of Service (DoS).
Medium [CVE-2026-63821] fix memory leaks on USB write failures
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: fix memory leaks on USB write failures When rtw_usb_write_port() fails to submit a USB Request Block (URB) (e.g., due to device disconnect or ENOMEM), the completion callback is never executed. Currently, the driver ignores the return value of rtw_usb_write_port() in rtw_usb_write_data() and rtw_usb_tx_agg_skb(). Because these functions rely on the completion callback to free the socket buffers (skbs) and the transaction control block (txcb), a submission failure results in: 1. A memory leak of the allocated skb in rtw_usb_write_data(). 2. A memory leak of the txcb structure and all aggregated skbs in rtw_usb_tx_agg_skb(). If it fails, explicitly free the skb in rtw_usb_write_data(), and properly purge the tx_ack_queue and free the txcb in rtw_usb_tx_agg_skb(). The issue was discovered in practice during device disconnect/reconnect scenarios and memory pressure conditions. Tested by verifying normal TX operation continues after the fix without regressions. When the `rtw_usb_write_port()` function fails to submit a USB Request Block (URB), such as during a device disconnect or out of memory conditions, the system does not properly free allocated memory. This oversight leads to memory leaks of socket buffers and transaction control blocks.
Medium [CVE-2026-63810] Avoid mounting the bdev pseudo-filesystem in userspace
In the Linux kernel, the following vulnerability has been resolved: block: Avoid mounting the bdev pseudo-filesystem in userspace The bdev pseudo-filesystem is an internal kernel filesystem with which userspace should not interfere. Unregister it so that userspace cannot even attempt to mount it. This fixes a bug [1] that occurs when attempting to access files, because the system call move_mount() uses pointers declared in the inode_operations structure, which for the bdev pseudo-filesystem are always equal to 0. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
Medium [CVE-2026-53402] fix out-of-bounds read in err_out of fbcon_do_set_font
In the Linux kernel, the following vulnerability has been resolved: fbdev: fbcon: fix out-of-bounds read in err_out of fbcon_do_set_font() When fbcon_do_set_font() fails (e.g., due to a memory allocation failure inside vc_resize() under heavy memory pressure), it jumps to the `err_out` label to roll back the console state. However, the current rollback logic forgets to restore the `hi_font` state, leading to a severe state machine corruption. Earlier in the function, `set_vc_hi_font()` might be called to change `vc->vc_hi_font_mask` and mutate the screen buffer. If `vc_resize()` subsequently fails, the `err_out` path restores `vc_font.charcount` but entirely skips rolling back the `vc_hi_font_mask` and the screen buffer. This mismatch leaves the terminal in a desynchronized state. Because `vc_hi_font_mask` remains set, the VT subsystem will still accept character indices greater than 255 from userspace and write them to the screen buffer. Subsequent rendering calls (e.g., `fbcon_putcs()`) will then use these inflated indices to access the reverted, 256-character font array, leading to a deterministic out-of-bounds read and potential kernel memory disclosure. Fix this by adding the missing rollback logic for the `hi_font` mask and screen buffer in the error path.
Medium [CVE-2026-53394] avoid leaking pre-allocated openowner on unconfirmed retry race
In the Linux kernel, the following vulnerability has been resolved: nfsd: avoid leaking pre-allocated openowner on unconfirmed retry race When find_or_alloc_open_stateowner() encounters an unconfirmed owner, it calls release_openowner() and sets oo = NULL. Control then falls through past the `if (oo)` guard -- which would have freed any pre-allocated `new` -- and unconditionally executes `new = alloc_stateowner(...)`. If `new` was already allocated on a prior iteration, the pointer is silently overwritten and the previous allocation (slab object + owner name buffer) is leaked. This requires a race: two NFSv4.0 OPEN threads with the same owner string, where a concurrent thread inserts a new unconfirmed owner into the hash between retry iterations. The window is narrow but repeatable under adversarial conditions. Fix by adding `goto retry` after `oo = NULL` so the already-allocated `new` is reused on the next iteration rather than overwritten. A flaw was found in the Linux kernel's Network File System (NFS) version 4.0 (NFSv4.0) OPEN implementation. This can lead to a memory leak where pre-allocated memory for an openowner is not properly released, potentially causing a Denial of Service (DoS) over time due to resource exhaustion. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772.
Medium [CVE-2026-63822] fix warning when unbinding
In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix warning when unbinding If there is an error during some initialization related to firmware, the buffers dp->tx_ring[i].tx_status are released. However this is released again when the device is unbinded (ath11k_pci), and we get: WARNING: CPU: 0 PID: 6231 at mm/slub.c:4368 free_large_kmalloc+0x57/0x90 Call Trace: free_large_kmalloc ath11k_dp_free ath11k_core_deinit ath11k_pci_remove... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set the buffers to NULL after releasing in order to avoid the double free. This vulnerability, a double free, occurs when memory buffers are incorrectly released twice during the device unbinding process after an initial firmware initialization error. This can lead to system instability or a kernel crash, potentially impacting system availability. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-1341. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-53387] add bounds check to veml6075_it_ms index
In the Linux kernel, the following vulnerability has been resolved: iio: light: veml6075: add bounds check to veml6075_it_ms index veml6075_it_ms has 5 elements but VEML6075_CONF_IT can yield values 0-7. If it returns a value >= 5, this causes an out-of-bounds array access. Add a bounds check and return -EINVAL if the index is out of range. The problem values are reserved so should never be read from the register. Hence this is hardening against fault device, missprogramming or bus corruption. The driver performs an out-of-bounds array access when processing certain index values from the `VEML6075_CONF_IT` register. This issue could potentially lead to system instability or a denial of service if triggered by a faulty device, misprogramming, or bus corruption. Red Hat severity: Moderate. Weakness: CWE-787. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Medium [CVE-2026-63803] sync per-proto timers before freeing hdlc state
In the Linux kernel, the following vulnerability has been resolved: hdlc_ppp: sync per-proto timers before freeing hdlc state Each PPP control protocol (LCP/IPCP/IPV6CP) embedded in struct ppp registers a timer via timer_setup(). That struct ppp is the hdlc->state allocation, which detach_hdlc_protocol() frees with kfree() in both teardown paths: unregister_hdlc_device() and the re-attach inside attach_hdlc_protocol(). The ppp proto never registered a.detach callback, so detach_hdlc_protocol() performs no timer synchronization before the kfree(). The only cancel, timer_delete(&proto->timer) in ppp_cp_event(), is partial (it does not wait for a running callback) and only runs on the ->CLOSED transition; ppp_stop()/ppp_close() do not sync either. A ppp_timer callback already executing (blocked on ppp->lock) survives the kfree and then dereferences proto->state / ppp->lock in freed memory, leading to a use-after-free. Fix this by adding a.detach helper that calls timer_shutdown_sync() on every per-proto timer. detach_hdlc_protocol() invokes proto->detach(dev) before kfree(hdlc->state), so timer_shutdown_sync() now runs on both free paths. timer_shutdown_sync() is used instead of timer_delete_sync() because the keepalive path re-arms the timer through add_timer()/mod_timer() and shutdown blocks any re-activation during teardown.
Medium [CVE-2026-63834] restrict number of unacked list entries
In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: restrict number of unacked list entries When the unacked_list is unbound, an attacker could send messages with small lengths and appropriated seqno + gaps to force the receiver to allocate more and more unacked_list entries. And the end either causing an out-of-memory situation or increase the management overhead for the (large) list that significant portions of CPU cycles are wasted in searching through the list. When limiting the list to a specific number, it is important to still correctly add a new entry to the list. But if the list became larger than the limit, the last entry of the list (with the highest seqno) must be dropped to still allow the earlier seqnos to finish and therefore to continue the process. Otherwise, the process might get stuck with too high seqnos which are not handled by batadv_tp_ack_unordered(). A remote attacker could exploit an unbound list of unacknowledged packets by sending specially crafted messages. This could force the system to allocate excessive memory or waste significant CPU cycles, leading to a Denial of Service (DoS) condition. Red Hat severity: Moderate. Weakness: CWE-770.
Medium [CVE-2026-63847] set no_user_fence for JPEG v2.5 ring
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v2.5 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 3216a7f4e2642bda5fd14f57586e835ae9202587) A flaw was found in the Linux kernel's AMD GPU JPEG driver. This issue occurs because the JPEG hardware component does not properly handle certain types of graphics commands, specifically 64-bit user fence writes. An attacker could craft and submit malicious commands, causing the system to reject these submissions. This could lead to a denial of service, making the graphics functionality unavailable. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-1287. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.