Red Hat Linux Security Advisories & CVEs
12445 advisories tracked · Red Hat Security Data API · direct feeds checked every minute; rate-limited backstops use a safe source cadence
Android app · Google Play
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 34 official vendor sources and 160+ reviewed platform categories.
Security advisories for your Red Hat release
Pick your distribution release to see every advisory issued for it and its severity mix. Fixes ship as errata — keep the system patched. This is the release's advisory history, not a per-package scan.
Official source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat advisories
Medium [CVE-2026-72327] Reject invalid indirect BO handle in indirect CSD setup
In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Reject invalid indirect BO handle in indirect CSD setup v3d_get_cpu_indirect_csd_params() looks up the indirect buffer object from a userspace-supplied handle but never checks the result. A bogus or stale handle makes drm_gem_object_lookup() return NULL, which is then stored in info->indirect and only dereferenced later when the indirect CSD job runs, turning a userspace mistake into a NULL pointer dereference in the kernel. Bail out with -ENOENT as soon as the lookup fails, so the bad handle is rejected at submission time. This can lead to a system crash, resulting in a Denial of Service (DoS). A low impact flaw was found in the Linux kernel drm/v3d driver. There is no impact on confidentiality or integrity. All currently assessed Red Hat Enterprise Linux and Red Hat In-Vehicle OS kernel streams are not affected because the vulnerable code is not present in the shipped kernels. Although the CVSS:3.1 base score is 5.5 (moderate), the overall Red Hat impact is rated low because exploitation requires local access to the V3D DRM device and the consequence is limited to a system crash. Weakness: CWE-476.
Medium [CVE-2026-72032] HWS, fix matcher leak on resize target setup failure
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, fix matcher leak on resize target setup failure hws_bwc_matcher_move() allocates a replacement matcher before setting it as the resize target. If mlx5hws_matcher_resize_set_target() fails, the replacement matcher is not attached anywhere and is leaked. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have a mlx5 HWS-capable device to test with, no runtime testing was able to be performed. This vulnerability occurs when the hws_bwc_matcher_move() function attempts to resize a matcher, and the mlx5hws_matcher_resize_set_target() operation fails. In such a scenario, a replacement matcher is allocated but not properly deallocated, leading to a memory leak. Over time, repeated occurrences of this flaw could potentially lead to a Denial of Service (DoS) due to resource exhaustion. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 9.
Medium [CVE-2026-72486] fix UAF during device teardown
In the Linux kernel, the following vulnerability has been resolved: mailbox: mtk-adsp: fix UAF during device teardown When the SOF audio driver fails to initialize (e.g. firmware boot timeout), its devres unwind frees the snd_sof_dev object that the mailbox client (mtk-adsp-ipc) reaches via chan->cl->rx_callback. The mtk-adsp-mailbox shutdown clears the mailbox command registers but leaves the IRQ line unmasked, so a late interrupt can still queue a threaded handler after mbox_free_channel() had cleared chan->cl, and mbox_chan_received_data() would then trigger UAF: BUG: KASAN: slab-use-after-free in sof_ipc3_validate_fw_version sof_ipc3_validate_fw_version sof_ipc3_do_rx_work sof_ipc3_rx_msg mt8196_dsp_handle_request mtk_adsp_ipc_recv mbox_chan_received_data mtk_adsp_mbox_isr irq_thread_fn Freed by task...: kfree devres_release_all really_probe... (sof-audio-of-mt8196 probe failure) The crash was observed roughly three seconds after the failed probe. disable_irq() in shutdown and enable_irq() in startup. disable_irq() also waits for any in-flight interrupts, so by the time mbox_free_channel() proceeds to clear chan->cl no rx_callback can run. In addition, request the IRQ with IRQF_NO_AUTOEN so it stays masked between probe and the first client bind — otherwise an early interrupt can crash on chan->cl == NULL in mbox_chan_received_data().
Medium [CVE-2026-72056] clean up XDP TX queues when regular TX setup fails
In the Linux kernel, the following vulnerability has been resolved: net: ena: clean up XDP TX queues when regular TX setup fails create_queues_with_size_backoff() creates XDP TX queues before setting up the regular TX path. If the subsequent allocation or creation of regular TX queues fails, the error handling paths omit the teardown of the XDP TX queues, leading to a resource leak. Fix this by explicitly destroying the XDP TX queue subset at the two missing failure points. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have an ENA device to test with, no runtime testing was able to be performed. A flaw was found in the Linux kernel's Elastic Network Adapter (ENA) driver. During the setup of eXpress Data Path (XDP) transmit (TX) queues, if the subsequent setup of regular TX queues fails, the error handling mechanism does not properly clean up the XDP TX queues. This oversight can lead to a resource leak, potentially resulting in a Denial of Service (DoS) condition. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-459.
Medium [CVE-2026-72155] Improve locking user experience
In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: swp: Improve locking user experience In the case of the first block being locked (or the few first blocks), if the user want to fully unlock the device it has two possibilities: - either it asks to unlock the entire device, and this works; - or it asks to unlock just the block(s) that are currently locked, which fails. It fails because the conditions "can_be_top" and "can_be_bottom" are true. Indeed, in this case, we unlock everything, so the TB bit does not matter. However in the current implementation, use_top would be true (as this is the favourite option) and lock_len, which in practice should be reduced down to 0, is set to "nor->params->size - (ofs + len)" which is a positive number. This is wrong. An easy way is to simply add an extra condition. In the unlock() path, if we can achieve the same result from both sides, it means we unlock everything and lock_len must simply be 0. A comment is added to clarify that logic. When a user attempts to unlock specific blocks on a Serial Peripheral Interface (SPI) NOR flash device, particularly those at the beginning of the device, the operation may fail. This occurs due to an incorrect calculation of the `lock_len` parameter, which prevents the intended blocks from being unlocked.
Medium [CVE-2026-72014] reject data replies with an out-of-range payload size
In the Linux kernel, the following vulnerability has been resolved: drbd: reject data replies with an out-of-range payload size recv_dless_read() receives a P_DATA_REPLY from a peer into the bio of an outstanding read request. The peer-supplied payload length reaches it as the signed int data_size, and two peer-controlled inputs can make it negative. With a negotiated data-integrity-alg the digest length is subtracted first, so a reply whose payload is smaller than the digest underflows data_size. With no integrity algorithm (the default) data_size is assigned from the unsigned h95/h100 wire length and drbdd() never bounds it for a payload-carrying command, so a length above INT_MAX casts it negative; this path needs no non-default feature. The bio receive loop then computes expect = min_t(int, data_size, bv_len), which is negative, and drbd_recv_all_warn(mapped, expect) receives with a size_t of SIZE_MAX into the first mapped page. The sibling receive path read_in_block() is not affected: it uses an unsigned size and rejects it against DRBD_MAX_BIO_SIZE before receiving. Reject a data reply whose size is negative after the optional digest subtraction, covering both triggers. Impact: a malicious or man-in-the-middle DRBD peer copies attacker-chosen bytes past a bio page in the receiver, corrupting kernel memory.
Medium [CVE-2026-72163] fix NULL h_transaction deref in ocfs2_assure_trans_credits
In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits [BUG] A direct write over unwritten extents can panic the kernel in ocfs2_assure_trans_credits() when the journal aborts during DIO completion. The crash is a general protection fault from a NULL pointer dereference. [CAUSE] ocfs2_dio_end_io_write() loops over a direct write's unwritten extents, marking each written under a single journal handle. If the journal aborts (for example after an I/O error) while the extent tree is being updated, the handle is left aborted with its transaction pointer cleared. The extent merge treats that failure as not critical and reports success, so the loop keeps using the handle. ocfs2_assure_trans_credits() reads the handle's remaining credits without first checking whether the handle is aborted, and that read dereferences the cleared transaction pointer. [FIX] A journal abort is recorded in the handle itself, so callers are expected to test the handle rather than rely on a returned error. Make ocfs2_assure_trans_credits() do that, as the other ocfs2 journal helpers already do, and return -EROFS when the handle is aborted. A local user with write access to an OCFS2 filesystem could trigger a kernel panic by performing a direct write over unwritten extents.
Medium [CVE-2026-72183] Fix LANDLOCK_SCOPE_SIGNAL bypass on the SIGIO path
In the Linux kernel, the following vulnerability has been resolved: landlock: Fix LANDLOCK_SCOPE_SIGNAL bypass on the SIGIO path LANDLOCK_SCOPE_SIGNAL must prevent a sandboxed process from signaling processes outside its Landlock domain. It can be bypassed through the asynchronous SIGIO delivery path. A sandboxed process that owns any file or socket can arm it with fcntl(fd, F_SETOWN, -pgid), fcntl(fd, F_SETSIG, SIGKILL) and O_ASYNC, so that an I/O event makes the kernel deliver the chosen signal to the whole process group. As the head of its process group's task list (the default position right after fork()) that group can also hold the non-sandboxed process that launched it, e.g. a supervisor or a security monitor. The sandbox can thus kill or signal the processes LANDLOCK_SCOPE_SIGNAL is meant to protect from it. The scope is enforced in hook_file_send_sigiotask() against the Landlock domain recorded at F_SETOWN time, not the live domain of the sender. control_current_fowner() decides whether to record that domain and skips recording it when the fowner target is in the caller's thread group, which is safe only for a single-task target (PIDTYPE_PID, PIDTYPE_TGID). Affected products named by the advisory: Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
Medium [CVE-2026-72303] Validate notification payload size
In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-control: Validate notification payload size Validate MODULE_NOTIFICATION payload length before reading bytes/channel data in control update handling. An attacker could potentially exploit this by providing a malformed notification, which may lead to unexpected system behavior or a denial of service. A moderate out-of-bounds read vulnerability was found in the Linux kernel ASoC Sound Open Firmware (SOF) IPC4 control update handling. The MODULE_NOTIFICATION payload length is not validated before bytes/channel control data is read, so a malformed notification reaching the SOF IPC4 audio control path can cause the kernel to read past the end of the notification buffer, resulting in a kernel crash and local denial of service. Red Hat rated this flaw Moderate (CVSS 5.5, AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H) because exploitation requires local access on a system with affected SOF IPC4 audio support and the impact is limited to availability; this differs from the upstream CVEORG score of 7.8, which assumes high confidentiality and integrity impact that the evidence for this read-only flaw does not support. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
Medium [CVE-2026-72087] Fix memory leak in lpfc_sli4_driver_resource_setup
In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup() The memory allocated for mboxq using mempool_alloc() is not freed in some of the early exit error paths. Fix that by moving the mempool_free() call to an earlier point after last use. This memory leak can lead to resource exhaustion, potentially resulting in a denial of service (DoS) for the system. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-72029] bound device offsets in the MUX downlink decoder
In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: bound device offsets in the MUX downlink decoder mux_dl_adb_decode() walks a chain of aggregated datagram tables using offsets and lengths taken from the modem. first_table_index, next_table_index, table_length, datagram_index and datagram_length are all device supplied le values. Only first_table_index was checked, and only for being non zero. The decoder then formed adth = block + adth_index and read the table header and the datagram entries with no bound against the received skb. A modem that reports an index or a length past the downlink buffer makes the decoder read out of bounds. The buffer is IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE and skb->len is at most that, so skb->len is the real limit, but none of these in band offsets were checked against it. The table chain is also followed with no forward progress check. The loop takes the next table from adth->next_table_index and stops only when that reaches zero. A modem can stage two tables that point at each other, so the loop never ends. It runs in softirq and clones the skb on every pass. Validate every device offset and length against skb->len before use. Each table header, on entry and after every next_table_index, must lie inside the skb. The header padding must not exceed the datagram length so the receive length does not wrap.
Medium [CVE-2026-72238] Validate console=uart8250 baud rate to fix early boot hang
In the Linux kernel, the following vulnerability has been resolved: x86/boot: Validate console=uart8250 baud rate to fix early boot hang When the baud rate is empty, 0, invalid, or overflows to 0 when stored as an int, the system will hang during early boot because of a division by zero in early_serial_init(). Fall back to DEFAULT_BAUD when the resulting baud rate is 0 to prevent an early system hang. This invalid input leads to a division-by-zero error in the `early_serial_init()` function, resulting in a Denial of Service (DoS). A MODERATE severity denial of service flaw was found in the Linux kernel x86 boot code. A local user able to control kernel boot parameters could use this flaw to cause a complete denial of service of the system at boot time; confidentiality and integrity are not affected. All Red Hat Enterprise Linux 6 through 10 (kernel and kernel-rt) and Red Hat In-Vehicle OS 2 (kernel and kernel-ivos-qualcomm) products in scope for this flaw are not affected because the vulnerable code is not present in the shipped kernels. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-369.
Medium [CVE-2026-72037] Initialize eth_syslock spinlock before use
In the Linux kernel, the following vulnerability has been resolved: net: lan743x: Initialize eth_syslock spinlock before use lan743x_hardware_init() calls pci11x1x_strap_get_status() during the PCI11x1x probe sequence. That helper acquires the Ethernet subsystem hardware lock via lan743x_hs_syslock_acquire(), which relies on adapter->eth_syslock_spinlock to serialize access. The spinlock is currently initialized only after the strap status is read. With CONFIG_DEBUG_SPINLOCK enabled, taking the zeroed initialized spinlock can trip the spinlock debug check. Fix by initializing adapter->eth_syslock_spinlock before reading the strap status so the probe path never attempts to lock an uninitialized spinlock. A flaw was found in the Linux kernel's `lan743x` Ethernet driver. A system lock, or spinlock, is accessed during the driver's initialization sequence before it has been properly set up. This improper initialization can lead to a system crash if kernel debugging features are enabled, resulting in a Denial of Service (DoS). Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-908. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
Medium [CVE-2026-72024] remove interfaces with RCU list deletion
In the Linux kernel, the following vulnerability has been resolved: mac802154: remove interfaces with RCU list deletion Queue wake, stop, and disable paths walk local->interfaces under RCU. The bulk hardware teardown path removes entries with list_del(), so an asynchronous transmit completion can follow a poisoned list node in ieee802154_wake_queue(). Use list_del_rcu() as in the single-interface removal path. The following unregister_netdevice() waits for in-flight RCU readers before freeing the netdevice, so no separate grace-period wait is needed. When network interfaces are removed, the system incorrectly manages memory, which can cause a program to try and use memory that is no longer available or has been corrupted. This vulnerability could lead to system instability or a denial of service, making the affected system unresponsive. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-72023] fix SQB pointer leak on init failure
In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix SQB pointer leak on init failure otx2_init_hw_resources() initializes SQ aura and pool resources before several later setup steps. On failure, err_free_sq_ptrs only frees SQB pages, leaving the per-SQ sqb_ptrs arrays behind. Use otx2_free_sq_res() for the SQ unwind path and let it free sqb_ptrs even when sq->sqe has not been allocated yet. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an OcteonTX2 PF device and the corresponding AF mailbox setup to test with, no runtime testing was able to be performed. During the initialization of hardware resources, a memory leak occurs where certain pointer arrays are not properly freed upon failure. This issue could lead to resource exhaustion, potentially resulting in a Denial of Service (DoS) for the system. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.
Medium [CVE-2026-72090] Use caller client for debug BO sync
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Use caller client for debug BO sync amdxdna_drm_sync_bo_ioctl() looks up args->handle in the ioctl caller's drm_file. For SYNC_DIRECT_FROM_DEVICE, it then calls amdxdna_hwctx_sync_debug_bo(), but passes abo->client. amdxdna_hwctx_sync_debug_bo() uses the passed client both as the handle namespace for debug_bo_hdl and as the owner of the hardware context xarray. Those must match the file that supplied args->handle. The BO's stored client pointer is object state, not the ioctl context. Pass filp->driver_priv instead, matching the original handle lookup. A flaw was found in the Linux kernel's amdxdna graphics acceleration driver. A local user could exploit an incorrect client handling issue within the `amdxdna_drm_sync_bo_ioctl()` function. When performing a `SYNC_DIRECT_FROM_DEVICE` operation, the `amdxdna_hwctx_sync_debug_bo()` function is called with an incorrect client, leading to a mismatch in the handle namespace and hardware context ownership. This could potentially allow unauthorized access to debug buffer objects. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-648. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Medium [CVE-2026-72089] Reject firmware log with size smaller than header
In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Reject firmware log with size smaller than header fw_log_from_bo() validates the tracing buffer header_size and that the log fits within the BO, but never checks that log->size is at least log->header_size. fw_log_print_buffer() then computes: u32 data_size = log->size - log->header_size; which underflows to a near-U32_MAX value when firmware reports a log whose size is smaller than its header. That huge data_size defeats the log_start/log_end bounds clamps added by commit dd1311bcf0e6 ("accel/ivpu: Add bounds checks for firmware log indices"), so fw_log_print_lines() reads far past the small real data region of the BO. A size of 0 also makes fw_log_from_bo() advance the offset by 0, causing the callers to loop forever on the same header. A flaw was found in the Linux kernel's Intel Versatile Processing Unit (IVPU) accelerator driver. An attacker could exploit a vulnerability in how the driver handles firmware logs with incorrect size information. This could lead to an out-of-bounds read, potentially disclosing sensitive information or causing a system crash. In some cases, it could also result in a denial of service due to an infinite loop. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-125.
Medium [CVE-2026-72039] fix potential memory leak in bnx2x_alloc_mem_bp
In the Linux kernel, the following vulnerability has been resolved: bnx2x: fix potential memory leak in bnx2x_alloc_mem_bp() If the allocation of fp[i].tpa_info fails, the error path will not free the struct bnx2x_fastpath allocated earlier, as it is not linked to the bp structure yet. Fix that by linking it immediately after allocation. If an allocation within this function fails, a previously allocated memory structure is not correctly released, leading to a memory leak. Repeated occurrences of this issue could lead to system instability or a denial of service (DoS). Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-72048] fix cas_ctl leak on spi_async failure
In the Linux kernel, the following vulnerability has been resolved: ieee802154: ca8210: fix cas_ctl leak on spi_async failure ca8210_spi_transfer() allocates cas_ctl with kzalloc_obj(GFP_ATOMIC) and relies entirely on the SPI completion callback ca8210_spi_transfer_complete() to free it. The spi_async() API only invokes the completion callback on successful submission. On failure it returns a negative error code without ever queuing the callback, which leaves cas_ctl and its embedded spi_message and spi_transfer orphaned. Every kfree(cas_ctl) in the driver is inside the completion callback, so there is no other reclamation path. ca8210_spi_transfer() is called from ca8210_spi_exchange(), the interrupt handler ca8210_interrupt_handler(), and from the retry path inside the completion callback itself. The exchange and interrupt handler paths loop on -EBUSY, so under sustained SPI bus contention every retry iteration leaks a fresh cas_ctl (~600 bytes per occurrence). Fix it by freeing cas_ctl on the spi_async() error path. While here, correct the misleading error string: the function calls spi_async(), not spi_sync(). The ieee802154: ca8210 driver fails to free allocated memory (cas_ctl) when the spi_async() operation encounters an error. Under sustained Serial Peripheral Interface (SPI) bus contention, this can lead to repeated memory leaks.
Medium [CVE-2026-72038] fix BAR resource leak on PF number failure
In the Linux kernel, the following vulnerability has been resolved: net: liquidio: fix BAR resource leak on PF number failure If cn23xx_get_pf_num() fails, the function returns without unmapping either BAR. Unmap both BARs before returning from the error path. Found by manual code review. A flaw was found in the `liquidio` network driver within the Linux kernel. This vulnerability occurs when the `cn23xx_get_pf_num()` function fails, leading to Base Address Register (BAR) resources not being properly unmapped. This resource leak could potentially be exploited by a local attacker to cause a Denial of Service (DoS) or system instability. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.