Red Hat Linux Security Advisories & CVEs
12893 advisories tracked · Red Hat Security Data API · direct feeds checked every minute; rate-limited backstops use a safe source cadence
Android app · Google Play
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 34 official vendor sources and 160+ reviewed platform categories.
Security advisories for your Red Hat release
Pick your distribution release to see every advisory issued for it and its severity mix. Fixes ship as errata — keep the system patched. This is the release's advisory history, not a per-package scan.
Official source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat advisories
High [CVE-2026-74435] rxrpc_verify_data ensure rx_dec_buffer alloc
In the Linux kernel, the following vulnerability has been resolved: rxrpc: rxrpc_verify_data ensure rx_dec_buffer alloc rxrpc_recvmsg_data() calls rxrpc_verify_data() whenever the rxrpc_call.rx_dec_buffer is unallocated and assumes that upon successful return that rx_dec_buffer must be allocated. However, rxrpc_verify_data() does not request an allocation if the rxrpc_skb_priv.len is zero. In addition, failure to allocate rx_dec_buffer will result in a call to skb_copy_bits() with a NULL destination which can trigger a NULL pointer dereference. To prevent these issues rxrpc_verify_data() is modified to always attempt to allocate the rxrpc_call.rx_dec_buffer if it is NULL. This issue was identified with assistance of a private sashiko instance. This vulnerability occurs when the rxrpc_verify_data function fails to allocate a necessary buffer if the incoming data length is zero. An attacker could exploit this by sending specially crafted network packets, leading to a NULL pointer dereference and potentially causing a system crash, resulting in a denial of service. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-476. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
High [CVE-2026-74378] Fix TOCTOU heap overflow in get_srq_wqe
In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix TOCTOU heap overflow in get_srq_wqe get_srq_wqe() reads wqe->dma.num_sge from the shared receive queue buffer, which is mapped into userspace. It validates num_sge against max_sge, but then re-reads the same field to calculate the memcpy size. A concurrent userspace thread can modify num_sge between validation and use, causing a heap buffer overflow when copying the WQE into qp->resp.srq_wqe. Read num_sge into a local variable and use it for both the bounds check and the size calculation. A Time-of-check to time-of-use (TOCTOU) vulnerability exists where a user-space thread can modify the `num_sge` value after it has been validated but before it is used to calculate a memory copy size. This allows a local attacker to trigger a heap buffer overflow when copying a Work Queue Entry (WQE), potentially leading to a denial of service or arbitrary code execution. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-131. Affected Red Hat products: Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
High [CVE-2026-74430] Fix ACKALL packet handling
In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix ACKALL packet handling rxrpc_input_ackall() accepts ACKALL packets without checking whether the call is in a state that can legitimately have outstanding transmit buffers. A forged ACKALL can therefore reach a new service call in RXRPC_CALL_SERVER_RECV_REQUEST before any reply packets have been queued. In that state call->tx_top is zero and call->tx_queue is NULL, so rxrpc_rotate_tx_window() dereferences a NULL txqueue and triggers a null-pointer dereference. Fix the handling of ACKALL packets by the following means: (1) Add two new call states: RXRPC_CALL_CLIENT_PRE_SEND which indicates that the client call is connected, but nothing has been transmitted as yet; and RXRPC_CALL_CLIENT_AWAIT_ACK, which indicates that everything has been transmitted at least once, but we're now waiting for the stuff remaining in the Tx buffer to be ACK'd (retransmissions may still happen). The RXRPC_CALL_CLIENT_PRE_SEND state is set when the call is assigned a channel and transitions to RXRPC_CALL_CLIENT_SEND_REQUEST when the first packet is transmitted. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat package: kernel.
High [CVE-2026-74391] Bound synthetic-field strings with seq_buf
In the Linux kernel, the following vulnerability has been resolved: tracing: Bound synthetic-field strings with seq_buf The synthetic field helpers build a prefixed synthetic variable name and a generated hist command in fixed MAX_FILTER_STR_VAL buffers. The current code appends those strings with raw strcat(), so long key lists, field names, or saved filters can run past the end of the staging buffers. This keeps the existing tracing-side limit while using the helper intended for bounded command construction. [ sdr: Moved struct seq_buf *s for upside-down x-mas tree formatting ] This vulnerability occurs because synthetic field helpers use unbounded string concatenation (strcat()) when building synthetic variable names and generated history commands. An attacker providing excessively long input for key lists, field names, or saved filters could cause a buffer overflow. This could lead to a denial of service (DoS) or other unpredictable system behavior. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-120. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
High [CVE-2026-74394] fix integer overflow in immediate data length check
In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: fix integer overflow in immediate data length check imm_buf->len is a user-controlled uint32_t received from the network. Adding it to imm_data_offset without overflow checking allows a malicious initiator to send len=0xFFFFFFFF, causing req_size to wrap around to a small value, bypassing the bounds check, and subsequently passing a ~4GB length to sg_init_one(). Use check_add_overflow() to detect wrapping before the comparison. A flaw was found in the Linux kernel's Remote Direct Memory Access (RDMA) SCSI RDMA Protocol (SRP) Target (srpt) component. By sending a specially crafted network packet, a malicious initiator can cause the length calculation to wrap around, bypassing security checks and potentially leading to memory corruption or a denial of service. Red Hat severity: Important — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-190. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
High [CVE-2026-74359] configfs_lookup: don't leave ->s_dentry dangling on failure
In the Linux kernel, the following vulnerability has been resolved: configfs_lookup(): don't leave ->s_dentry dangling on failure Normally ->s_dentry is cleared when dentry it's pointing to becomes negative (on eviction, realistically). However, that only happens if dentry gets to be positive in the first place; in case of inode allocation failure dentry never becomes positive, so ->d_iput() is not called at all. We do part of what normally would've been done by configfs_d_iput() (dropping the reference to configfs_dirent) manually, but we do not clear ->s_dentry there. Sloppy as it is, it does not matter in case of configfs_create_{dir,link}() - there configfs_dirent does not survive dropping the sole reference to it. However, for configfs_lookup() it *does* survive, with a dangling pointer to soon to be freed dentry sitting it its ->s_dentry. Subsequent getdents(2) in that directory will end up dereferencing that pointer in order to pick the inode number. Use after free... This is the minimal fix; the right approach is to set the linkage between dentry and configfs_dirent only after we know that we have an inode, but that takes more surgery and the bug had been there since 2006, so... A flaw was found in the Linux kernel's `configfs` component. A local attacker could exploit this by interacting with the affected directory, which could cause memory corruption.
High [CVE-2026-74315] Avoid hashing uninitialized bytes in nlm4svc_lookup_file
In the Linux kernel, the following vulnerability has been resolved: lockd: Avoid hashing uninitialized bytes in nlm4svc_lookup_file() file_hash() digests the first LOCKD_FH_HASH_SIZE bytes of nfs_fh.data when bucketing nlm_files[], independent of fh.size. Commit 3de744ee4e45 ("lockd: Use xdrgen XDR functions for the NLMv4 TEST procedure") set.pc_argzero to zero for the converted procedures and moved file-handle population into nlm4svc_lookup_file(), which copies only xdr_lock->fh.len bytes into lock->fh.data. When an NLMv4 client presents a file handle shorter than LOCKD_FH_HASH_SIZE, bytes fh.len..31 retain whatever the argument buffer held from an earlier request. The same wire handle then hashes to different buckets across calls; nlm_lookup_file() misses the existing nlm_file entry, and lock-state lookups fail. Zero only the tail bytes that file_hash() would otherwise consume. Handles of LOCKD_FH_HASH_SIZE or larger already populate every byte that file_hash() reads. A remote attacker can exploit this vulnerability by presenting a Network Lock Manager version 4 (NLMv4) file handle shorter than expected. This causes the system to hash uninitialized bytes, leading to inconsistent file handle lookups. Consequently, existing lock-state entries are missed, resulting in a Denial of Service (DoS) for NLM operations.
High [CVE-2026-74398] bail out of dad_failure when state is no longer POSTDAD
In the Linux kernel, the following vulnerability has been resolved: ipv6: addrconf: bail out of dad_failure when state is no longer POSTDAD addrconf_dad_failure() transitions ifp->state from DAD to POSTDAD via addrconf_dad_end(), which drops ifp->lock on return. The lock is re-acquired after net_info_ratelimited(). A concurrent ipv6_del_addr() can take the lock in that window, set ifp->state to DEAD and run list_del_rcu(&ifp->if_list). addrconf_dad_failure() then overwrites DEAD with ERRDAD at errdad: and schedules a new dad_work. The work calls ipv6_del_addr() again, hitting the already-poisoned list entry: general protection fault: 0000 [#1] SMP NOPTI CPU: 4 PID: 217 Comm: kworker/4:1 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:ipv6_del_addr+0xe9/0x280 RAX: dead000000000122 Call Trace: addrconf_dad_stop+0x113/0x140 addrconf_dad_work+0x28c/0x430 process_one_work+0x1eb/0x3b0 worker_thread+0x4d/0x400 kthread+0x104/0x140 ret_from_fork+0x35/0x40 Fold the addrconf_dad_end() logic into addrconf_dad_failure() under a single ifp->lock critical section. The STABLE_PRIVACY branch temporarily drops ifp->lock around address regeneration, so at lock_errdad: verify the state is still POSTDAD before transitioning to ERRDAD; bail out otherwise to avoid overwriting a state set by another path while the lock was released.
High [CVE-2026-74390] Fix out-of-bounds write in irdma_copy_user_pgaddrs
In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix out-of-bounds write in irdma_copy_user_pgaddrs The irdma_copy_user_pgaddrs function loops through all of the umem DMA blocks to populate the PBLEs and will stop when either the last DMA block is reached or palloc->total_cnt is reached. The issue is that the logic for checking palloc->total_cnt would only work for non-zero values. When irdma_setup_pbles is called with lvl==0, it calls irdma_copy_user_pgaddrs with palloc->total_cnt==0, which means the only way to break out of the loop is to reach the last umem DMA block, which means it could end up going beyond the fixed size of 4 iwmr->pgaddrmem array that is used in the lvl==0 case. In the case of QP/CQ/SRQ rings, the value of lvl is determined by a separate input (for example, req.cq_pages in the case of a CQ). So, we must perform explicit checking to ensure we don't overflow the pgaddrmem array if the user provides a umem that consists of more blocks than their provided req.cq_pages. A flaw was found in the Linux kernel's RDMA (Remote Direct Memory Access) irdma driver. This vulnerability occurs due to an error in how the `irdma_copy_user_pgaddrs` function handles memory allocation, specifically when a certain counter is zero. This can lead to an out-of-bounds write, where data is written beyond its intended memory location.
High [CVE-2026-74283] require net admin for TIPCv2 netlink mutators
In the Linux kernel, the following vulnerability has been resolved: tipc: require net admin for TIPCv2 netlink mutators TIPCv2 registers mutating generic-netlink operations without admin permission flags. Generic netlink only checks CAP_NET_ADMIN when an operation sets GENL_ADMIN_PERM or GENL_UNS_ADMIN_PERM, so a local unprivileged process can currently change TIPC state through commands such as TIPC_NL_NET_SET, TIPC_NL_KEY_SET, TIPC_NL_KEY_FLUSH, and bearer enable/disable. The legacy TIPC netlink API already checks netlink_net_capable(..., CAP_NET_ADMIN) for administrative commands. Use GENL_UNS_ADMIN_PERM, which maps to the same namespace-aware CAP_NET_ADMIN check that netlink_net_capable() performs, so the behaviour matches the legacy path and keeps working for CAP_NET_ADMIN holders in a non-initial user namespace (containers). A QEMU/KASAN repro run as uid/gid 65534 with zero effective capabilities previously succeeded in changing the network id and node identity, setting and flushing key material, and enabling/disabling a UDP bearer. With this patch applied the same operations fail with -EPERM. A flaw was found in the Linux kernel's Transparent Inter-Process Communication (TIPC) version 2 component. This vulnerability allows a local unprivileged attacker to bypass administrative permission checks when performing network link operations.
High [CVE-2026-74492] do not update comments from kernel-side hash adds
In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: do not update comments from kernel-side hash adds mtype_resize() copies comment pointers with memcpy(), not the comment objects themselves. During the window after an entry has been copied but before the table swap and backlog replay, the old table is still published for packet-side updates while the replacement-table entry already holds the same ip_set_comment_rcu pointer. If xt_SET --add-set... --exist hits that old entry in this window, mtype_add() calls ip_set_init_comment() even though packet-side adds carry no comment payload. That call frees the shared comment through the old entry, so the replacement-table entry now holds a stale pointer. When the queued add is replayed on the new table, mtype_add() calls ip_set_init_comment() again and strlen() dereferences the stale pointer. Fix this in mtype_add() by skipping ip_set_init_comment() when ext->target marks a packet-side add. Userspace adds still update comments, while packet-side adds can no longer free comment storage shared with a resize copy. During an ipset hash table resize operation, a race condition can occur where a packet-side add attempts to update a comment. This can lead to a stale pointer being dereferenced, resulting in a kernel crash and a Denial of Service (DoS) for the affected system.
High [CVE-2026-74439] Clear Present bit before tearing down scalable-mode context entry
In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down scalable-mode context entry device_pasid_table_teardown() zeroes the 128-bit scalable-mode context entry with context_clear_entry() while the Present bit is still set. This creates a window where the hardware can fetch a torn entry, with some fields already zeroed while Present is still set, leading to unpredictable behavior or spurious faults. The context-cache invalidation is issued only after the entry has been zeroed, and intel_pasid_free_table() then frees the PASID directory pages, so the IOMMU can keep walking a stale Present=1 entry that points at freed memory. While x86 provides strong write ordering, the compiler may reorder the two 64-bit writes to the entry, and the hardware fetch is not guaranteed to be atomic with respect to multiple CPU writes. Commit c1e4f1dccbe9d ("iommu/vt-d: Clear Present bit before tearing down context entry") fixed this exact pattern in domain_context_clear_one() and the copied-context path, but device_pasid_table_teardown() was not converted. Align it with the "Guidance to Software for Invalidations" in the VT-d spec, Section 6.5.3.3, using the same ownership handshake as the sibling fix: clear only the Present bit, flush it to the IOMMU, perform the context-cache invalidation, and only then zero the rest of the entry.
High [CVE-2026-74436] serialize kernel accept preallocation with socket teardown
In the Linux kernel, the following vulnerability has been resolved: rxrpc: serialize kernel accept preallocation with socket teardown rxrpc_kernel_charge_accept() reads rx->backlog without any socket/backlog synchronization and passes that raw pointer into rxrpc_service_prealloc_one(). A concurrent rxrpc_discard_prealloc() sets rx->backlog = NULL and frees the backlog rings, so a kernel preallocation worker can keep using a freed struct rxrpc_backlog while updating *_backlog_head/tail and array slots. Serialize the state check and backlog lookup with the socket lock, and reject kernel preallocation once teardown has disabled listening or discarded the service backlog. A synchronization issue in the rxrpc component, specifically between `rxrpc_kernel_charge_accept()` and `rxrpc_discard_prealloc()`, can lead to a use-after-free vulnerability. A local attacker could potentially exploit this flaw, causing a kernel preallocation worker to access freed memory. This could result in system instability or a denial of service (DoS). Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
High [CVE-2026-74446] hold event_mutex while checkpointing CRIU events
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: hold event_mutex while checkpointing CRIU events kfd_criu_checkpoint_events() counts the entries in p->event_idr via kfd_get_num_events(), allocates an array sized to that count, and then walks the same IDR to fill it. Neither the count nor the walk holds p->event_mutex. The CRIU checkpoint caller holds only p->mutex. Event create and destroy (kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not take p->mutex, so a second thread in the same process can insert or remove events between the count and the walk. If an event is inserted, the walk iterates more entries than were counted and writes past the end of the ev_privs allocation; if an event is removed, the walk dereferences an entry that is being freed. Hold p->event_mutex across the count and the walk so both observe a consistent view of p->event_idr. The lock is released before copy_to_user(), which only touches the local buffer. The caller already holds p->mutex and the create/destroy paths never take p->mutex, so the p->mutex -> p->event_mutex order is not inverted and no deadlock is introduced. (cherry picked from commit ff57e223ab105795b05d3ef3f3c35a5a441bcbaa) A race condition exists in the `kfd_criu_checkpoint_events()` function where a mutex is not consistently held during event checkpointing.
High [CVE-2026-74476] convert frag_list skbs before running XDP
In the Linux kernel, the following vulnerability has been resolved: veth: convert frag_list skbs before running XDP A frag_list skb can reach veth with data_len set but nr_frags zero. veth_convert_skb_to_xdp_buff() only converts skbs that are shared, locked, have frags[], or do not have enough headroom. It later uses skb_is_nonlinear() to decide whether to set XDP_FLAGS_HAS_FRAGS and xdp_frags_size. That exposes frag_list data to XDP as if it were stored in frags[], but frags[] is empty. AF_XDP copy mode can then trust the bogus XDP fragment metadata, walk an empty fragment entry, and crash in memcpy() from __xsk_rcv(). Route non-linear skbs through skb_pp_cow_data() before exposing them to XDP, and only advertise XDP frags when the resulting skb has frags[]. skb_copy_bits() already handles frag_list input, and skb_pp_cow_data() builds frags[] output with skb_add_rx_frag(), which is the representation XDP multi-buffer expects. This vulnerability occurs when a specially crafted network packet, known as a frag_list skb (socket buffer), is processed by the veth driver. An attacker could potentially send such a packet, causing the system to misinterpret fragment metadata. This misinterpretation can lead to a memory corruption issue, ultimately resulting in a system crash and a Denial of Service (DoS).
High [CVE-2026-74509] Fix advertising data UAFs
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix advertising data UAFs hci_find_adv_instance() returns an adv_info pointer that is valid only while hdev->lock is held. The advertising command-sync paths perform instance lookups without that lock and, in some cases, retain the pointer while waiting for a controller response. An advertising termination event can therefore interleave as follows: hci_cmd_sync_work hci_rx_work hci_find_adv_instance() __hci_cmd_sync_status() wait for controller reply hci_dev_lock() hci_remove_adv_instance() kfree(adv) adv->scan_rsp_changed = false KASAN reported: BUG: KASAN: slab-use-after-free in hci_set_ext_scan_rsp_data_sync+0x2e1/0x300 Write of size 1 at addr ffff88810a45d21d by task kworker/u17:0/88 Workqueue: hci0 hci_cmd_sync_work Call Trace: hci_set_ext_scan_rsp_data_sync+0x2e1/0x300 hci_schedule_adv_instance_sync+0x390/0x4c0 hci_cmd_sync_work+0x173/0x300 Allocated by task 87: hci_add_adv_instance+0x538/0xac0 add_advertising+0x885/0x1160 Freed by task 89: kfree+0x131/0x3c0 hci_remove_adv_instance+0x1d8/0x3b0 hci_le_ext_adv_term_evt+0x17b/0x730 Protect the instance lookup and payload construction in the extended advertising, scan response, and periodic advertising data paths. Snapshot the advertising parameters under hdev->lock, but release the lock before waiting for the controller.
High [CVE-2026-74510] fix UAF in pair command cancellation
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix UAF in pair command cancellation The pairing completion and authentication failure callbacks look up the pending MGMT_OP_PAIR_DEVICE command by walking hdev->mgmt_pending. The lookup returned a command that was still linked on the shared pending list, without keeping mgmt_pending_lock held for the later dereference and removal. A concurrent MGMT_OP_CANCEL_PAIR_DEVICE request can remove and free the same pending command before the callback uses it. The reverse race is also possible when cancel_pair_device() gets a command from pending_find() and a callback removes it before the cancel path dereferences it. This can lead to a use-after-free and a second list_del(). Make the pairing lookup helpers transfer ownership of the pending command by removing it from hdev->mgmt_pending while holding mgmt_pending_lock. The callbacks and cancel path then complete the command and free it directly, so racing paths cannot find or free the same command again. Take a temporary hci_conn reference in cancel_pair_device() because the command completion drops the reference stored in the pending command. This race condition can lead to a use-after-free vulnerability, which may allow a local attacker to cause a denial of service or potentially achieve privilege escalation.
High [CVE-2026-74452] reject firmware sections with oversized data
In the Linux kernel, the following vulnerability has been resolved: drm/panthor: reject firmware sections with oversized data In panthor_fw_load_section_entry(), the data size to copy is calculated without validating it against the allocated section_size: section->data.size = hdr.data.end - hdr.data.start; If a crafted firmware sets data.size larger than the allocated memory, this could cause a heap buffer overflow in panthor_fw_init_section_mem() memcpy(section->mem->kmap, section->data.buf, section->data.size); Additionally, if the section->data.size exceeds the BO size, could this memset underflow the size calculation, leading to a massive out-of-bounds zeroing of kernel memory? memset(section->mem->kmap + section->data.size, 0, panthor_kernel_bo_size(section->mem) - section->data.size); Reject section entries whose initial data is larger than the section size. The most significant consequence is a denial of service, but it could potentially lead to further system compromise. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-120. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
High [CVE-2026-74574] fix fdev setup failure cleanup in idxd_cdev_open
In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix fdev setup failure cleanup in idxd_cdev_open() The failed_dev_add and failed_dev_name paths drop the file-device reference while wq->wq_lock is still held. If put_device(fdev) drops the last reference, idxd_file_dev_release() runs synchronously and tries to take wq->wq_lock again, deadlocking. Those paths also fall through into the later ctx cleanup labels even though idxd_file_dev_release() owns that cleanup and frees ctx. This can make idxd_xa_pasid_remove(ctx) and kfree(ctx) operate on a freed context. Move idxd_wq_get() before file-device setup can fail, since the release callback always calls idxd_wq_put(). Then unlock wq->wq_lock before put_device(fdev) and return directly from the file-device setup failure path, leaving ctx cleanup to the release callback. A race condition during file-device setup failure cleanup in the idxd_cdev_open() function could lead to a deadlock, causing a denial of service. Furthermore, incorrect cleanup paths could result in operations on a freed memory context, potentially allowing a local attacker to escalate privileges. Red Hat severity: Moderate — CVSS 7.3 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:L/A:H). Weakness: CWE-833. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9.
High [CVE-2026-74533] fix race of kfree vs kref_get_unless_zero
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero hci_conn::iso_data is accessed and modified without lock or RCU. This leads to a race [Task hdev->workqueue] [Task 2] iso_recv iso_conn_put(conn) conn = LOAD hcon->iso_data iso_conn_free(conn) iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL kfree(conn) kref_get_unless_zero(&conn->ref) /* UAF */ and also to races in iso_conn_add() vs. iso_conn_free(). Fix by adding spinlock hci_conn::proto_lock and using it to guard hci_conn::iso_data. This vulnerability is caused by a race condition where certain data is accessed and modified without proper synchronization, leading to a use-after-free (UAF) error. An attacker could potentially exploit this to execute arbitrary code or cause the system to crash, resulting in a denial of service. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.