Red Hat Linux Security Advisories & CVEs
13012 advisories tracked · Red Hat Security Data API · direct feeds checked every minute; rate-limited backstops use a safe source cadence
Android app · Google Play
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 34 official vendor sources and 160+ reviewed platform categories.
Security advisories for your Red Hat release
Pick your distribution release to see every advisory issued for it and its severity mix. Fixes ship as errata — keep the system patched. This is the release's advisory history, not a per-package scan.
Official source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat advisories
Medium [CVE-2026-74462] mark I2C adapter when hardware is powered down
In the Linux kernel, the following vulnerability has been resolved: i2c: imx: mark I2C adapter when hardware is powered down On some i.MX platforms, certain I2C client drivers keep a periodic workqueue which continues to trigger I2C transfers. During system suspend/resume, there exists a time window between: - suspend_noirq and the system entering suspend - the system starting to resume and resume_noirq In this window, the I2C controller resources such as clock and pinctrl may already be disabled or not yet restored. If a workqueue triggers an I2C transfer in this period, the driver attempts to access I2C registers while the hardware resources are unavailable, which may lead to system hang. Mark the I2C adapter as suspended during noirq suspend and block new transfers until resume, ensuring that I2C transfers are only issued when hardware resources are available. This vulnerability results in a Denial of Service (DoS). Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-366. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
Medium [CVE-2026-74525] free TX rings on RX allocation failure
In the Linux kernel, the following vulnerability has been resolved: net: sxgbe: free TX rings on RX allocation failure When RX descriptor ring allocation fails, init_dma_desc_rings() only frees the partially allocated RX rings and returns. The TX rings that were allocated earlier in the same function are leaked. Rearrange error labels to clean up TX rings upon RX failures. A flaw was found in the Linux kernel's sxgbe network driver. When the system fails to allocate receive (RX) descriptor rings, the transmit (TX) rings that were previously allocated are not properly released. This oversight leads to a memory leak, which could result in resource exhaustion and potentially a Denial of Service (DoS) for the affected system. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Medium [CVE-2026-74567] fix out-of-bounds read in keyring_get_key_chunk
In the Linux kernel, the following vulnerability has been resolved: keys: fix out-of-bounds read in keyring_get_key_chunk() For description-level chunks keyring_get_key_chunk() advances the read pointer by level * sizeof(long) past the inline prefix but only bounds-checks the prefix, so a long enough key description is read past its kmemdup(desc, desc_len + 1) allocation. Compute the full byte offset and bounds-check the description against it before reading. The walk only reaches a description-level chunk when two keys collide through the hash, x, type and domain_tag chunks, so this is reached from an unprivileged add_key(2) with a crafted pair of same-type keys whose index hashes collide; KASAN reports a slab-out-of-bounds read. A flaw was found in the Linux kernel's key management subsystem. An unprivileged local attacker could exploit an out-of-bounds read vulnerability in the `keyring_get_key_chunk()` function. By providing specially crafted keys, the attacker can cause the system to read beyond its intended memory boundaries. This could lead to the disclosure of sensitive information or a system crash (denial of service). Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-125. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 9.
Medium [CVE-2026-74553] (nct6775-core) Fix number of temperature registers for NCT6116
In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Fix number of temperature registers for NCT6116 Unlike NCT6106, NCT6116 only has three temperature registers, and with it only three temperature source and temperature source configuration registers. The register addresses match those of NCT6106 and can be re-used. The code used a separate array to list the temperature source registers for NCT6116, but used the size of the NCT6106 register array to set the number of registers. The NCT6106 register array provides six addresses, while the temperature source register array for NCT6116 only provides three addresses. This causes a KASAN report. BUG: KASAN: global-out-of-bounds in nct6775_probe+0x936/0x46f0 [nct6775] Read of size 2 at addr ffffffffc19561a6 by task modprobe/954... Call Trace: dump_stack+0x7d/0xa7 print_address_description.constprop.0+0x1c/0x220? __kasan_kmalloc.constprop.0+0xc9/0xd0? __kmalloc_node_track_caller+0x194/0x5b0? nct6775_probe+0x936/0x46f0 [nct6775]? nct6775_probe+0x936/0x46f0 [nct6775]... Drop the unnecessary NCT6116_REG_TEMP_SOURCE array and re-use NCT6106_REG_TEMP_SOURCE. A flaw was found in the Linux kernel's `hwmon` (hardware monitoring) subsystem, specifically within the `nct6775-core` driver. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat package: kernel.
Medium [CVE-2026-74572] fix deadlock between metadata writeback and transaction commit
In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix deadlock between metadata writeback and transaction commit When writing out metadata extent buffers in a zoned filesystem, btree_writepages() holds fs_info->zoned_meta_io_lock across the whole writeback loop, including the call to btrfs_check_meta_write_pointer() -> check_bg_is_active(). For the tree-log block group, check_bg_is_active() may fail to activate the zone and fall back to btrfs_zone_finish_one_bg() to free an active zone. That path waits for the running transaction to commit while still holding zoned_meta_io_lock, but the committer needs that same lock to write out the tree extents, so the two tasks deadlock: Task A (kworker, metadata writeback) Task B (fsstress, transaction commit) ------------------------------------ ------------------------------------- wb_workfn() btrfs_commit_transaction(T) btree_writepages() btrfs_write_and_wait_transaction() btrfs_zoned_meta_io_lock() btrfs_write_marked_extents() btrfs_check_meta_write_pointer() btree_writepages() check_bg_is_active() [treelog_bg] btrfs_zoned_meta_io_lock() btrfs_zone_finish_one_bg() do_zone_finish() btrfs_inc_block_group_ro() btrfs_wait_for_commit() The sibling branch in check_bg_is_active() already drops zoned_meta_io_lock around do_zone_finish() for this exact reason.
Medium [CVE-2026-74490] avoid use-after-free in poll trace queue dumps
In the Linux kernel, the following vulnerability has been resolved: tipc: avoid use-after-free in poll trace queue dumps TIPC socket tracepoints dump queue state through tipc_sk_dump(). Most queue-dump callsites already serialize that walk under the socket lock or sk->sk_lock.slock, but tipc_poll() calls trace_tipc_sk_poll(..., TIPC_DUMP_ALL,...) without holding either lock. That lets the poll trace path reach tipc_list_dump() and backlog head/tail dumping while another context dequeues and frees an skb, leaving the trace helper dereferencing a stale queue entry. Stop the unlocked poll trace site from requesting queue dumps. Other queue dump trace callsites keep their existing output under the locking they already provide, while poll still emits the event itself without walking live queue members from an unlocked context. A flaw was found in the Linux kernel's TIPC (Transparent Inter-Process Communication) module. A race condition exists in the `tipc_poll()` function when dumping trace queue state, as it does not properly hold necessary locks. This allows a local attacker to trigger a use-after-free vulnerability by causing the system to access memory that has already been freed. This could lead to a denial of service or other unpredictable system behavior. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825.
Medium [CVE-2026-74515] Reject adapter interrupt forwarding if already enabled
In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Reject adapter interrupt forwarding if already enabled The MPCIFC instruction doesn't allow registering adapter interrupts without first unregistering. So reject any request to enable interrupt forwarding if its already enabled for the zPCI device. This also fixes overwriting and thus leaking resources when the ioctl is called multiple times for the same device. A flaw was found in the Linux kernel's KVM (Kernel-based Virtual Machine) s390 PCI component. This vulnerability arises from improper handling of adapter interrupt forwarding, where enabling it multiple times for a zPCI device without prior unregistration can lead to resource overwriting and leakage. An attacker could potentially exploit this to cause information disclosure or system instability. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-74478] fix use-after-free in vector_mmsg_rx
In the Linux kernel, the following vulnerability has been resolved: um: vector: fix use-after-free in vector_mmsg_rx() When vector_mmsg_rx() discards a packet whose overlay header fails verify_header(), it frees the skb and continues the loop: if (header_check estats.rx_encaps_errors++; continue; } The normal and short-packet paths fall through to the bottom of the loop body, which clears the consumed slot and advances the cursors: (*skbuff_vector) = NULL; mmsg_vector++; skbuff_vector++; The verify_header() < 0 path skips that via continue, so the freed skb is left in skbuff_vector[] and the cursors do not advance. The next iteration reads the same slot, gets the freed skb, and frees it again, producing a refcount underflow / use-after-free in the RX path. Discard the slot the same way the other paths do before continuing. Only transports whose verify_header() can return negative are affected: GRE and L2TPv3 do so on a cookie/session-id mismatch (raw/tap do not), so any peer on such a transport can trigger it without authentication. A remote attacker, by sending specially crafted packets over GRE or L2TPv3 transports, could trigger a use-after-free vulnerability. This occurs in the `vector_mmsg_rx()` function when a packet's overlay header fails verification, causing the system to attempt to free an already freed network buffer. This issue leads to a denial of service.
Medium [CVE-2026-74451] validate firmware interface structure sizes
In the Linux kernel, the following vulnerability has been resolved: drm/panthor: validate firmware interface structure sizes iface_fw_to_cpu_addr() only checks that the firmware-provided MCU virtual address points inside the shared section. The returned pointer is later used as a full firmware interface structure, so accepting an address near the end of the shared section can still lead to out-of-bounds accesses. Pass the expected object size to iface_fw_to_cpu_addr() and reject ranges that do not fit entirely in the shared section. The `iface_fw_to_cpu_addr()` function, responsible for validating firmware interface structure sizes, does not adequately check if the firmware-provided Microcontroller Unit (MCU) virtual address fits entirely within the shared memory section. Such accesses could result in system instability or information disclosure. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-805. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Medium [CVE-2026-74544] validate offshift to prevent shift-out-of-bounds
In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: validate offshift to prevent shift-out-of-bounds u32_change() copies the user-provided tc_u32_sel.offshift (unsigned char, 0-255) into the kernel knode object without bounds validation. When a packet later hits u32_classify() with TC_U32_VAROFFSET set, it evaluates `ntohs(offmask & *data) >> offshift` where the left operand is a 16-bit value promoted to a 32-bit int. Any offshift >= 32 is undefined behavior per C11 6.5.7p3, triggerable by an unprivileged user via user/network namespaces. UBSAN: shift-out-of-bounds in net/sched/cls_u32.c:236:43 shift exponent 32 is too large for 32-bit type int Fix this by rejecting offshift >= 16 during filter creation in u32_change(). An unprivileged user, through user or network namespaces, could provide a specially crafted `offshift` value that is not properly validated. This improper validation leads to a shift-out-of-bounds condition, resulting in undefined behavior and potentially causing a denial of service or system instability. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-1335. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9.
Medium [CVE-2026-74479] fix proc entry use-after-free
In the Linux kernel, the following vulnerability has been resolved: net: pktgen: fix proc entry use-after-free pktgen_change_name() replaces pkt_dev->entry while holding t->if_lock. pktgen_remove_device() removes the same entry before _rem_dev_from_if_list() takes that lock. This allows the following interleaving: CPU 0 (NETDEV_CHANGENAME) CPU 1 (kpktgend) if_lock(t) proc_remove(pkt_dev->entry) proc_remove(pkt_dev->entry) pkt_dev->entry = proc_create_data(...) if_unlock(t) The kthread can pass the stale proc_dir_entry to proc_remove() after the rename path has freed it. A reproducer with a widened race window reports: BUG: KASAN: slab-use-after-free in proc_remove+0x78/0x80 Read of size 8 at addr ffff8881478fea70 by task kpktgend_0/67 Call Trace: proc_remove+0x78/0x80 pktgen_remove_device.isra.0+0x11c/0x4c0 pktgen_thread_worker+0x1214/0x6bc0 kthread+0x2c6/0x3b0 Allocated by task 95: __proc_create+0x204/0x790 proc_create_data+0x72/0xe0 pktgen_thread_write+0xd61/0x1510 Freed by task 28: kmem_cache_free+0xcb/0x3d0 proc_free_inode+0x5b/0x80 rcu_core+0x50a/0x1850 The buggy address belongs to the object at ffff8881478fea00 which belongs to the cache proc_dir_entry of size 192 Move proc_remove() into the if_lock-protected list removal helper. Keep it before list_del_rcu() to preserve the ordering required by add_device().
Medium [CVE-2026-74483] don't leak the user namespace when the mount fails
In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: don't leak the user namespace when the mount fails bm_get_tree() takes a reference to the user namespace and hands it to get_tree_keyed() as the sget key. sget_fc() moves that reference into sb->s_fs_info and clears fc->s_fs_info, so from that point on the superblock owns it and bm_free() doesn't see it anymore. The superblock drops it in ->put_super(). But generic_shutdown_super() only calls ->put_super() from inside the if (sb->s_root) branch, so nothing releases it when bm_fill_super() fails: - The kzalloc_obj() failure leaves s_root NULL and the whole branch is skipped. - A simple_fill_super() failure in the file loop leaves s_root set, but s_op still points at simple_super_operations, which has no ->put_super(). bm_fill_super() installs s_ops only once simple_fill_super() returned success, and installing it earlier wouldn't help either because simple_fill_super() overwrites s_op. Either way vfs_get_super() calls deactivate_locked_super() and the reference is gone for good. binfmt_misc mounts are available in a user namespace and both the inode and the dentry cache are SLAB_ACCOUNT, so an unprivileged caller under a tight memory cgroup can fail simple_fill_super() on demand and leak one user namespace per attempt.
Medium [CVE-2026-74468] use raw_spinlock_t for the register lock
In the Linux kernel, the following vulnerability has been resolved: gpio: pch: use raw_spinlock_t for the register lock pch_irq_type() is registered as the irq_chip.irq_set_type callback and takes chip->spinlock with spin_lock_irqsave(). This callback is reached from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled. That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is an rtmutex-backed sleeping lock, so acquiring it there is invalid. This was confirmed on a PREEMPT_RT kernel with lockdep (PROVE_RAW_LOCK_NESTING and DEBUG_ATOMIC_SLEEP). A grounded PoC mirrored pch_irq_type()'s locking and drove it through the real genirq carrier irq_set_irq_type() -> __irq_set_trigger() -> chip->irq_set_type(), i.e. the same __irq_set_trigger() edge that __setup_irq() takes for a requested IRQ.
Medium [CVE-2026-74566] make keyring key-chunk byte order agree with keyring_diff_objects
In the Linux kernel, the following vulnerability has been resolved: keys: make keyring key-chunk byte order agree with keyring_diff_objects() keyring_get_key_chunk() loads description bytes into the index chunk low address first, while keyring_diff_objects() numbers the first differing bit from the low end and folds the absolute byte index into the level without removing the inline-prefix offset the level already carries. The two disagree on byte order and bit position, so the array can be told two keys first differ at a bit that does not differ in the chunk the walker uses, letting crafted descriptions collide into one node. This only changes the in-memory ordering used to place keys within a keyring; add, search and read of non-colliding keys are unaffected. An inconsistency in how key descriptions are processed by the `keyring_get_key_chunk()` and `keyring_diff_objects()` functions could allow a local attacker to create specially crafted key descriptions. These crafted descriptions might collide, potentially leading to unexpected system behavior or a denial of service. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-1025. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6.
Medium [CVE-2026-74548] fix UAF of txrx_stats in nv_remove
In the Linux kernel, the following vulnerability has been resolved: forcedeth: fix UAF of txrx_stats in nv_remove nv_remove() frees the per-CPU txrx_stats before unregister_netdev(). Until unregister completes, ndo_get_stats64, the NAPI/xmit data path, and nv_close()/drain may still access txrx_stats, leading to a use-after-free. Free the stats only after unregister_netdev(). This could potentially lead to system instability or denial of service. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Medium [CVE-2026-74577] initialize rtm_tos in mpls_getroute
In the Linux kernel, the following vulnerability has been resolved: net: mpls: initialize rtm_tos in mpls_getroute() mpls_getroute() builds the RTM_NEWROUTE reply to an RTM_GETROUTE request by filling a struct rtmsg allocated from an skb whose data area is not zeroed (alloc_skb(NLMSG_GOODSIZE,...)). It sets every field of the header except rtm_tos: r = nlmsg_data(nlh); r->rtm_family = AF_MPLS; r->rtm_dst_len= 20; r->rtm_src_len= 0; r->rtm_table= RT_TABLE_MAIN; r->rtm_type= RTN_UNICAST; r->rtm_scope= RT_SCOPE_UNIVERSE; r->rtm_protocol = rt->rt_protocol; r->rtm_flags= 0; struct rtmsg has no padding, so the one uninitialised byte rtm_tos (offset 3) is copied straight to user space on recvmsg(), leaking a byte of uninitialised heap memory. This is in contrast to mpls_dump_route(), which fills the very same header and does set rtm_tos = 0. Initialize rtm_tos to 0, matching mpls_dump_route(). Reproduced with KMSAN by adding an MPLS route and issuing a non-RTM_F_FIB_MATCH RTM_GETROUTE for its label: BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x36c/0x33f0 _copy_to_iter+0x36c/0x33f0 __skb_datagram_iter+0x196/0x12c0 skb_copy_datagram_iter+0x5b/0x210 netlink_recvmsg+0x37b/0xef0... Uninit was created at: __alloc_skb+0x8ca/0x10e0 mpls_getroute+0x1280/0x3a40 rtnetlink_rcv_msg+0x1138/0x15a0...
Medium [CVE-2026-74449] Fix divide-by-zero in calculate_mcache_setting on zero viewport
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport If a plane reaches calculate_mcache_setting with a zero-area viewport, calculate_mcache_setting exits early with num_mcaches == 0 and mvmpg_width/height == 0. This will cause a divide-by-zero panic and can also cause an underflow on num_mcaches. Fix this by changing calculate_mcache_setting to bool and adding guards after each calculate_mcache_row_bytes call. Callers will propagate the failure as a rejected mode, which prevents the panic. (cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da) A flaw was found in the display driver component of the Linux kernel. A local attacker could exploit a vulnerability related to how the system handles display settings, specifically when processing certain display configurations. This could lead to a system crash, resulting in a Denial of Service (DoS) for the affected system. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-369. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE.
Medium [CVE-2026-74552] (lm90) Only report alarms if driver is ready
In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Only report alarms if driver is ready Userspace can read sysfs attributes before driver registration is complete, immediately after devm_hwmon_device_register_with_info() has been called. At that time, data->hwmon_dev is not yet initialized. This can trigger a NULL pointer access since lm90_update_device() and with it lm90_update_alarms_locked() will be called. This call schedules report_work and lm90_report_alarms(), which passes the still-NULL data->hwmon_dev to hwmon_notify_event() and triggers a NULL pointer dereference. Fix the problem by only scheduling the report and alert workers data->hwmon_dev is set. A local user can trigger a null pointer dereference by reading sysfs attributes before the driver's registration is complete. This can lead to a system crash, resulting in a denial of service. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-824. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
Medium [CVE-2026-74457] add bounds check for USB channel index
In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: add bounds check for USB channel index The channel control index ctrl_idx is derived from rx->len which comes directly from a device USB payload. The mask 0x0f allows values 0-15, but the array size of usb_if->dev[] is only 2. Values 2-15 cause heap out-of-bounds read, eventually causing kernel panic in the IRQ context. Add bounds checking for ctrl_idx before the array access in both pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error(). A malicious USB device could send a specially crafted payload, leading to a heap out-of-bounds read. This vulnerability can cause a kernel panic, resulting in a Denial of Service (DoS) for the affected system. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-125. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-74444] validate DRAW_PRIMITIVES header size before division
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate DRAW_PRIMITIVES header size before division vmw_cmd_draw() computes maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); where header->size is u32 and is taken straight from the user-supplied command stream. When header->size is less than sizeof(cmd->body) the unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum. Any user-controlled cmd->body.numVertexDecls then passes the bound and the loop dereferences decl[i] far past the end of the kernel command bounce buffer, producing an out-of-bounds read of kernel memory. Reject undersized headers up front. A local attacker could exploit an issue in the `vmw_cmd_draw()` function by providing a specially crafted `DRAW_PRIMITIVES` header with an undersized value. This can lead to an out-of-bounds read of kernel memory, potentially allowing for information disclosure. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-125. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.