Red Hat Linux Security Advisories & CVEs
3176 advisories tracked · Red Hat Security Data API · direct feeds checked every minute; rate-limited backstops use a safe source cadence
Android app · Google Play
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 32 official vendor sources and 160+ reviewed platform categories.
Security advisories for your Red Hat release
Pick your distribution release to see every advisory issued for it and its severity mix. Fixes ship as errata — keep the system patched. This is the release's advisory history, not a per-package scan.
Official source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat advisories
Medium [CVE-2026-74531] hold conn reference in abort_conn_sync
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: hold conn reference in abort_conn_sync() There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. A theoretical Use-After-Free (UAF) vulnerability exists if a connection (`conn`) is prematurely freed while the `hci_sync` task is still active. This could potentially allow an attacker to cause a system crash or execute arbitrary code. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-74550] do not send ICMP/NDISC Redirects when peer allocation fails
In the Linux kernel, the following vulnerability has been resolved: net: do not send ICMP/NDISC Redirects when peer allocation fails When inet_getpeer_v4() or inet_getpeer_v6() fails to allocate a peer entry under memory pressure or tree size caps, redirect handlers previously fell back to sending un-rate-limited ICMP/NDISC Redirect messages. In IPv4, ip_rt_send_redirect() called icmp_send() directly when peer == NULL. In IPv6, ip6_forward() and ndisc_send_redirect() passed a NULL peer into inet_peer_xrlim_allow(), which returned true when peer == NULL. Because ICMP/NDISC Redirects are not part of the default global rate limit mask (sysctl_icmp_ratemask), sending redirects when peer == NULL creates an un-rate-limited ICMP packet storm. Fix this by failing closed in ip_rt_send_redirect(), ip6_forward(), and ndisc_send_redirect() when peer is NULL. When the network stack fails to allocate a peer entry, it can send un-rate-limited Internet Control Message Protocol (ICMP) or Neighbor Discovery (NDISC) Redirect messages. This can be exploited by a remote attacker to cause an uncontrolled flood of network traffic, leading to a Denial of Service (DoS) condition. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-476.
Medium [CVE-2026-74504] Fix division by zero in initialize_timer
In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix division by zero in initialize_timer() A userspace-driven ALSA timer (SND_UTIMER) lets an unprivileged user set the backing snd_timer's hardware resolution to an arbitrary 64-bit value via SNDRV_TIMER_IOCTL_CREATE. snd_utimer_create() only rejects zero. When such a timer is bound to a sequencer queue, initialize_timer() computes the tick period as tmr->ticks = 1000000000 / (r * freq); where r is that user-controlled resolution and freq is the sequencer update rate in Hz, clamped to MIN_FREQUENCY..MAX_FREQUENCY (10..6250). A resolution of 2^63 makes the 64-bit product r * freq wrap to zero for any even freq, including DEFAULT_FREQUENCY (1000), so the division faults with a divide-by-zero. The division runs under tmr->lock with interrupts disabled, so the oops leaves the spinlock held and hangs the CPU. It is reachable by an unprivileged user with access to /dev/snd/timer and /dev/snd/seq. Oops: divide error: 0000 [#1] SMP KASAN PTI CPU: 7 UID: 1000 PID: 456 Comm: alsa_seq_utimer Not tainted 7.2.0-rc4+ RIP: 0010:initialize_timer.constprop.0+0x20a/0x2d0 snd_seq_timer_start+0x15e/0x2b0 snd_seq_control_queue+0x56f/0xba0 snd_seq_write+0x3e0/0x730 Reject an overflowing product with check_mul_overflow() and fall back to a single tick, which also avoids feeding a wrapped-but-nonzero divisor (e.g.
Medium [CVE-2026-74530] hold conn in hci_connect_big_sync callback
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. Handle NULL hcon, return 0 + do nothing to match the previous behavior. This vulnerability, a Use-After-Free (UAF), occurs when a connection is prematurely released while a related synchronization task in `hci_connect_big_sync()` is still running. This theoretical flaw could allow an attacker to cause a system crash (denial of service) or potentially execute arbitrary code. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-364. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-74467] Check CAP_NET_ADMIN for private ioctls
In the Linux kernel, the following vulnerability has been resolved: s390/qeth: Check CAP_NET_ADMIN for private ioctls Gate the SIOCDEVPRIVATE ioctl commands SIOC_QETH_ADP_SET_SNMP_CONTROL, SIOC_QETH_GET_CARD_TYPE and SIOC_QETH_QUERY_OAT with CAP_NET_ADMIN capable check to ensure unprivileged users cannot invoke them. An unprivileged local user could exploit this vulnerability by invoking specific SIOCDEVPRIVATE ioctl commands, such as SIOC_QETH_ADP_SET_SNMP_CONTROL, SIOC_QETH_GET_CARD_TYPE, and SIOC_QETH_QUERY_OAT. These commands were not properly restricted by the CAP_NET_ADMIN capability check, allowing unauthorized access to network administration functions. This could lead to a privilege escalation, enabling the unprivileged user to perform actions reserved for privileged accounts. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-648. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-74546] (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read
In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read If the fan data becomes 0 between the FAN_DATA_VALID() check and the FAN_PERIOD_TO_RPM() conversion, it will result in a divide-by-zero crash due to a race with a concurrent update of the cached fan value. A flaw was found in the Linux kernel's hwmon (hardware monitoring) subsystem, specifically within the adt7470 driver. A local attacker could exploit a time-of-check to time-of-use (TOCTOU) race condition. If fan data becomes zero between a validation check and a conversion operation, it can lead to a divide-by-zero error, causing a system crash and resulting in a Denial of Service (DoS). Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-369. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
Medium [CVE-2026-74507] validate numbered report payloads
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: validate numbered report payloads When hidp_get_raw_report() waits for a numbered report, hidp_process_data() compares the expected report number with skb->data[0]. A connected HIDP peer can reply with only a DATA transaction header, leaving the skb empty after the header is removed. KMSAN reports an uninitialized-value use in hidp_session_run(), with the value originating in __alloc_skb() through vhci_write(). The transaction header checks remove the empty-frame reports, but this report remains until the payload check is added. The comparison can also consume a peer-controlled byte beyond the declared L2CAP PDU. A DATA | FEATURE response followed by an extra 0x01 byte made the current code accept that byte as report ID 1 and complete HIDIOCGFEATURE with a zero-byte result. With this change the malformed response is rejected with -EIO, while a subsequent valid response still succeeds. Require a payload byte before comparing a numbered report ID. Unnumbered reports continue to accept an empty payload. A flaw was found in the Linux kernel's Bluetooth Human Interface Device Protocol (HIDP) component. This vulnerability could potentially result in a denial of service or information disclosure. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H).
Medium [CVE-2026-74484] don't let an 'F' entry pin its own instance
In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: don't let an 'F' entry pin its own instance An entry registered with 'F' opens its interpreter at registration time and holds that file until the entry is freed. Any entry nobody removes by hand only gets closed once the binfmt_misc superblock is shut down. If the interpreter lives on a mount that keeps that superblock alive the two pin each other: binfmt_misc sb -> inode -> entry -> interp_file -> vfsmount -> binfmt_misc sb TL;DR the file is never closed. Once the mount namespace is gone there is nothing left to unregister through either. There are two ways to trigger this bug: - Point the interpreter at the instance itself. Its files are regular files owned by the mounter and both bm_get_inode() and simple_fill_super() leave i_op at empty_iops. So notify_change() falls back to simple_setattr() and chmod +x works. We never set SB_I_NOEXEC and so open_exec() accepts it. - Use the instance as an overlayfs lower layer. The overlay superblock holds a clone_private_mount() of every layer until it is destroyed and that clone is in no namespace. So umount_tree() never reaches it. That's a DoS. And it isn't only the superblock that leaks. It pins the user namespace it was mounted in, so every iteration permanently eats one of the caller's user namespace charges. So let's just do the sane thing.
Medium [CVE-2026-74487] restore write access when removing an entry
In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: restore write access when removing an entry Registering an entry with the MISC_FMT_OPEN_FILE flag opens the interpreter via open_exec() which denies write access to it for as long as the entry exists. Removing the entry closes the interpreter file via filp_close() but never restores write access, leaving the inode's i_writecount permanently negative. Opening the interpreter for writing keeps failing with ETXTBSY long after the entry is gone until the inode is evicted from the inode cache. Commit 90f601b497d7 ("binfmt_misc: restore write access before closing files opened by open_exec()") fixed the same imbalance in the error path of bm_register_write() but the actual removal path has been leaking the write denial since the introduction of the flag. Upon removal of this entry, the write access is not properly restored. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-74543] fix memory leak in udp_tunnel_nic_unregister
In the Linux kernel, the following vulnerability has been resolved: net: udp_tunnel: fix memory leak in udp_tunnel_nic_unregister() syzbot reported a memory leak [1] in the UDP tunnel NIC offload code. When device registration fails (e.g. in register_netdevice()), netdev core unwinds by sending a single NETDEV_UNREGISTER notification. If work was queued during NETDEV_REGISTER (utn->work_pending is set), udp_tunnel_nic_unregister() returns early: if (utn->work_pending) return; Because failed registrations do not enter netdev_wait_allrefs_any(), no subsequent NETDEV_UNREGISTER rebroadcast will ever occur. As a result, the struct udp_tunnel_nic allocated in udp_tunnel_nic_alloc() is leaked permanently. Fix this by removing the early return. Instead, synchronously cancel any pending work with cancel_delayed_work_sync() before freeing @utn. To be able to call cancel_delayed_work_sync() while holding RTNL (the work also needs RTNL), switch udp_tunnel_nic_device_sync_work() to rtnl_trylock(). If RTNL is contended, requeue the work with a 1 jiffy delay (via queue_delayed_work()) to prevent high CPU contention while waiting for RTNL lock. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
Medium [CVE-2026-74465] fix potential UAF on meter attach failure
In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix potential UAF on meter attach failure While attaching a newly created meter attach_meter() function makes the new meter visible to other CPUs but can still fail afterwards. On failure, it detaches the meter back and returns an error. However, this is an unexpected behavior for the ovs_meter_cmd_set() that uses a plain kfree(meter) on attach failure without waiting for RCU readers to stop using it, assuming it was never visible. This is never a problem for ovs-vswitchd as it always creates meters before creating any flows that use them. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
Medium [CVE-2026-74454] Supply the overflow slot size in BPOS, not the whole bin BO size
In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB binner BO, but writes the size of the whole BO to BPOS. On every binner out-of-memory event the PTB is therefore authorized to write tile lists across all the other slots (which may hold the tile state, tile alloc and overflow memory of in-flight jobs) and, for any slot but the first, past the end of the binner BO into unrelated CMA memory. Since CMA pages are recycled into page cache and user allocations, this is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU hangs with corrupted control list pointers, userspace heap corruption, a GPU that stays permanently wedged after the first hang, and occasional full system crashes, whenever a job overflows the initial binner slot. The bug dates back to the conversion from a dedicated overflow BO (where writing the full BO size was correct) to the slotted binner BO. An out-of-bounds write vulnerability exists where the graphics processing unit (GPU) driver incorrectly calculates memory allocation sizes. This allows the GPU to write data beyond its allocated memory region during out-of-memory events.
Medium [CVE-2026-74459] es58x_read_bulk_callback: fix RX buffer leak on URB resubmit failure
In the Linux kernel, the following vulnerability has been resolved: can: etas_es58x: es58x_read_bulk_callback(): fix RX buffer leak on URB resubmit failure es58x_read_bulk_callback() resubmits the RX URB after processing a received packet. If the resubmit succeeds, the URB remains anchored and will be handled by the normal RX path or by teardown. However, if usb_submit_urb() fails, the callback unanchors the URB and then returns directly. This skips the existing free_urb path, so the coherent transfer buffer allocated with usb_alloc_coherent() is not released. Reuse the existing free_urb path after a resubmit failure so that the RX coherent buffer is freed before leaving the callback. A memory leak occurs in the `es58x_read_bulk_callback()` function when an Urban Request Block (URB) resubmission fails. This failure prevents the proper release of the associated receive (RX) buffer, leading to a gradual exhaustion of system memory. This can ultimately result in a denial of service (DoS) for affected systems. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Medium [CVE-2026-74462] mark I2C adapter when hardware is powered down
In the Linux kernel, the following vulnerability has been resolved: i2c: imx: mark I2C adapter when hardware is powered down On some i.MX platforms, certain I2C client drivers keep a periodic workqueue which continues to trigger I2C transfers. During system suspend/resume, there exists a time window between: - suspend_noirq and the system entering suspend - the system starting to resume and resume_noirq In this window, the I2C controller resources such as clock and pinctrl may already be disabled or not yet restored. If a workqueue triggers an I2C transfer in this period, the driver attempts to access I2C registers while the hardware resources are unavailable, which may lead to system hang. Mark the I2C adapter as suspended during noirq suspend and block new transfers until resume, ensuring that I2C transfers are only issued when hardware resources are available. This vulnerability results in a Denial of Service (DoS). Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-366. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
Medium [CVE-2026-74525] free TX rings on RX allocation failure
In the Linux kernel, the following vulnerability has been resolved: net: sxgbe: free TX rings on RX allocation failure When RX descriptor ring allocation fails, init_dma_desc_rings() only frees the partially allocated RX rings and returns. The TX rings that were allocated earlier in the same function are leaked. Rearrange error labels to clean up TX rings upon RX failures. A flaw was found in the Linux kernel's sxgbe network driver. When the system fails to allocate receive (RX) descriptor rings, the transmit (TX) rings that were previously allocated are not properly released. This oversight leads to a memory leak, which could result in resource exhaustion and potentially a Denial of Service (DoS) for the affected system. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Medium [CVE-2026-74567] fix out-of-bounds read in keyring_get_key_chunk
In the Linux kernel, the following vulnerability has been resolved: keys: fix out-of-bounds read in keyring_get_key_chunk() For description-level chunks keyring_get_key_chunk() advances the read pointer by level * sizeof(long) past the inline prefix but only bounds-checks the prefix, so a long enough key description is read past its kmemdup(desc, desc_len + 1) allocation. Compute the full byte offset and bounds-check the description against it before reading. The walk only reaches a description-level chunk when two keys collide through the hash, x, type and domain_tag chunks, so this is reached from an unprivileged add_key(2) with a crafted pair of same-type keys whose index hashes collide; KASAN reports a slab-out-of-bounds read. A flaw was found in the Linux kernel's key management subsystem. An unprivileged local attacker could exploit an out-of-bounds read vulnerability in the `keyring_get_key_chunk()` function. By providing specially crafted keys, the attacker can cause the system to read beyond its intended memory boundaries. This could lead to the disclosure of sensitive information or a system crash (denial of service). Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-125. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 9.
Medium [CVE-2026-74553] (nct6775-core) Fix number of temperature registers for NCT6116
In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Fix number of temperature registers for NCT6116 Unlike NCT6106, NCT6116 only has three temperature registers, and with it only three temperature source and temperature source configuration registers. The register addresses match those of NCT6106 and can be re-used. The code used a separate array to list the temperature source registers for NCT6116, but used the size of the NCT6106 register array to set the number of registers. The NCT6106 register array provides six addresses, while the temperature source register array for NCT6116 only provides three addresses. This causes a KASAN report. BUG: KASAN: global-out-of-bounds in nct6775_probe+0x936/0x46f0 [nct6775] Read of size 2 at addr ffffffffc19561a6 by task modprobe/954... Call Trace: dump_stack+0x7d/0xa7 print_address_description.constprop.0+0x1c/0x220? __kasan_kmalloc.constprop.0+0xc9/0xd0? __kmalloc_node_track_caller+0x194/0x5b0? nct6775_probe+0x936/0x46f0 [nct6775]? nct6775_probe+0x936/0x46f0 [nct6775]... Drop the unnecessary NCT6116_REG_TEMP_SOURCE array and re-use NCT6106_REG_TEMP_SOURCE. A flaw was found in the Linux kernel's `hwmon` (hardware monitoring) subsystem, specifically within the `nct6775-core` driver. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat package: kernel.
Medium [CVE-2026-74572] fix deadlock between metadata writeback and transaction commit
A flaw was found in the Linux kernel's btrfs zoned filesystem. A local user could trigger a deadlock when metadata writeback and transaction commit operations occur simultaneously. This deadlock causes the system to hang, leading to a Denial of Service (DoS). Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-833. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
Medium [CVE-2026-74490] avoid use-after-free in poll trace queue dumps
In the Linux kernel, the following vulnerability has been resolved: tipc: avoid use-after-free in poll trace queue dumps TIPC socket tracepoints dump queue state through tipc_sk_dump(). Most queue-dump callsites already serialize that walk under the socket lock or sk->sk_lock.slock, but tipc_poll() calls trace_tipc_sk_poll(..., TIPC_DUMP_ALL,...) without holding either lock. That lets the poll trace path reach tipc_list_dump() and backlog head/tail dumping while another context dequeues and frees an skb, leaving the trace helper dereferencing a stale queue entry. Stop the unlocked poll trace site from requesting queue dumps. Other queue dump trace callsites keep their existing output under the locking they already provide, while poll still emits the event itself without walking live queue members from an unlocked context. A flaw was found in the Linux kernel's TIPC (Transparent Inter-Process Communication) module. A race condition exists in the `tipc_poll()` function when dumping trace queue state, as it does not properly hold necessary locks. This allows a local attacker to trigger a use-after-free vulnerability by causing the system to access memory that has already been freed. This could lead to a denial of service or other unpredictable system behavior. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825.
Medium [CVE-2026-74515] Reject adapter interrupt forwarding if already enabled
In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Reject adapter interrupt forwarding if already enabled The MPCIFC instruction doesn't allow registering adapter interrupts without first unregistering. So reject any request to enable interrupt forwarding if its already enabled for the zPCI device. This also fixes overwriting and thus leaking resources when the ioctl is called multiple times for the same device. A flaw was found in the Linux kernel's KVM (Kernel-based Virtual Machine) s390 PCI component. This vulnerability arises from improper handling of adapter interrupt forwarding, where enabling it multiple times for a zPCI device without prior unregistration can lead to resource overwriting and leakage. An attacker could potentially exploit this to cause information disclosure or system instability. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.