Red Hat Linux Security Advisories & CVEs
15664 advisories tracked · Red Hat Security Data API · direct feeds checked every minute; rate-limited sources checked less often
Get an email when Red Hat publishes the next one.
See Red Hat's last 90 days of advisories first. Then choose one product with live alerts free for life, or a free month of real-time alerts on everything with the severity, the fixed version and the vendor's link (card needed, then US$15/month; we email you before the first charge).
iPhone and Android apps · New on the App Store
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 34 official vendor sources and 160+ reviewed platform categories.
Security advisories for your Red Hat release
Pick your distribution release to see every advisory issued for it and its severity mix. Fixes ship as errata, so keep the system patched. This is the release's advisory history, not a per-package scan.
Official source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat advisories
Medium [CVE-2026-64476] Latch disable_idle_d3 per device
In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Latch disable_idle_d3 per device When disable_idle_d3 was introduced in vfio-pci, it directly manipulated the device power state with pci_set_power_state(). There were no refcounts to maintain or balanced operations, we could unconditionally bring the device to D0 and conditionally move it to D3hot. Therefore the module parameter was made writable. The parameter value could still be changed through sysfs, but the vfio-pci driver latched the values into vfio-pci-core globals at module init. Loading the vfio-pci module, or unloading and reloading, with non-default or different values could change the globals relative to existing devices bound to vfio-pci variant drivers. Runtime PM was introduced in commit 7ab5e10eda02 ("vfio/pci: Move the unused device into low power state with runtime PM"), which marks the point where power states became refcounted. PM get and put operations need to be balanced, but the same module operations noted above can change the global variables relative to those devices already bound to vfio-pci variant drivers. This introduces a window where PM operations can now become unbalanced. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
Medium [CVE-2026-64289] Set upper bounds on cache invalidation entry_num and entry_len
In the Linux kernel, the following vulnerability has been resolved: iommufd: Set upper bounds on cache invalidation entry_num and entry_len iommufd_hwpt_invalidate() takes a user-controlled entry_num and entry_len, each bounded only by U32_MAX. An entry_len beyond the kernel's struct size makes the copy helper verify the extra bytes are zero, scanning that excess in one uninterruptible pass; a multi-gigabyte value over zeroed user memory trips the soft-lockup watchdog. A large entry_num is the other half, driving the backend invalidation loop with no reschedule. The VT-d nested handler, for one, copies each entry and flushes caches per iteration, pinning the CPU on a non-preemptible kernel. Cap both in the ioctl. entry_len is held under PAGE_SIZE, above any request struct, and entry_num under 1 << 19, the order of a hardware invalidation queue and well beyond any real batch, bounding the per-call loop length. In the `iommufd` component, the `iommufd_hwpt_invalidate()` function allows a local user to provide excessively large values for `entry_num` and `entry_len` during cache invalidation. This can lead to a Denial of Service (DoS) by causing the system to become unresponsive. Specifically, large `entry_len` values can trigger a soft-lockup watchdog due to extensive memory scanning, while large `entry_num` values can cause an uninterruptible loop, pinning the CPU.
Medium [CVE-2026-64465] Fix sleep in atomic context in xhci_free_streams
In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix sleep in atomic context in xhci_free_streams() When a USB device with active stream endpoints is disconnected, xhci_free_streams() is called from the hub_event workqueue to free the stream resources. It calls xhci_free_stream_info() while holding xhci->lock with irqs disabled. xhci_free_stream_info() invokes xhci_free_stream_ctx(), which calls dma_free_coherent() for large stream context arrays. dma_free_coherent() can sleep (e.g. via vunmap), triggering a BUG when called from atomic context. Call trace: dma_free_attrs+0x174/0x220 xhci_free_stream_info+0xd0/0x11c xhci_free_streams+0x278/0x37c usb_free_streams+0x98/0xc0 usb_unbind_interface+0x1b8/0x2f8 device_release_driver_internal+0x1d4/0x2cc device_release_driver+0x18/0x28 bus_remove_device+0x160/0x1a4 device_del+0x1ec/0x350 usb_disable_device+0x98/0x214 usb_disconnect+0xf0/0x35c hub_event+0xab4/0x19ec process_one_work+0x278/0x63c Fix this by saving the stream_info pointers and clearing the ep references under the lock, then calling xhci_free_stream_info() outside the lock where sleeping is allowed. A flaw was found in the Linux kernel's USB xHCI (eXtensible Host Controller Interface) driver.
Medium [CVE-2026-64469] fix UAF in binder_thread_release
In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_thread_release() When a thread exits, binder_thread_release() walks its transaction stack to clear the t->from and t->to_proc that correspond with the exiting thread. However, a process dying in parallel might attempt to kfree some of these transactions. And if one of them has no associated t->to_proc, the t->to_proc->inner_lock will not be acquired.
Medium [CVE-2026-64407] Fix out-of-bounds firmware read in nxp_recv_fw_req_v3
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3() During the v3 firmware download the controller sends a v3_data_req with a 32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower bound of the offset and then sends firmware from that offset. nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction; serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data + nxpdev->fw_dnld_v3_offset, len); Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size, so a controller that asks for an offset or length past the firmware image makes the driver read past the end of nxpdev->fw->data and send that memory back over UART. nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent check to the v3 path, reject the request when it falls outside the firmware image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at free_skb stays consistent. This allows the driver to read memory beyond the intended firmware data and send it back over the Universal Asynchronous Receiver-Transmitter (UART), leading to information disclosure. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-125.
Medium [CVE-2026-64381] Fix next buffer leak in receive_encrypted_standard
In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix next buffer leak in receive_encrypted_standard() receive_encrypted_standard() allocates next_buffer before checking whether the number of compound PDUs already reached MAX_COMPOUND. If the limit check fails, the function returns immediately and the newly allocated next_buffer is not assigned to server->smallbuf/server->bigbuf, making it leaked. Move the MAX_COMPOUND check before allocating next_buffer. A remote attacker could exploit a memory leak in the `receive_encrypted_standard()` function by sending specially crafted compound Protocol Data Units (PDUs). This vulnerability occurs because a buffer is allocated before a necessary size check, leading to the buffer not being freed if the check fails. Repeated exploitation of this flaw could lead to a Denial of Service (DoS) due to memory exhaustion. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-64455] Fix slab-use-after-free in chaoskey_release
In the Linux kernel, the following vulnerability has been resolved: USB: chaoskey: Fix slab-use-after-free in chaoskey_release() The chaoskey driver has a use-after-free bug in its release routine. Thanks to Johan Hovold for pointing this out.) Since the bad access is part of an unimportant debugging statement, we can fix the problem simply by removing the whole statement. A local user could trigger a use-after-free vulnerability by closing the device file after the associated USB device has been unplugged. This could lead to a system crash due to memory corruption when a debugging statement attempts to access deallocated memory. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-64413] zero chainstack array
In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: zero chainstack array sashiko reports: looking at ebtables table translation, could a sparse cpu_possible_mask lead to an uninitialized pointer free? If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible, but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at CPU 2, the cleanup loop will blindly decrement and call vfree() on newinfo->chainstack[1]. Not a real-world bug, such allocation isn't expected to fail in the first place. This vulnerability involves an uninitialized pointer free that can occur when the system's CPU mask is sparse and a memory allocation fails. Under these specific and unlikely conditions, the kernel might attempt to free an uninitialized memory pointer, which could lead to system instability or a denial of service (DoS). Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-824. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat lists Red Hat Hardened Images as not affected. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE.
Medium [CVE-2026-64408] pin L2CAP connection during netdev registration
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: pin L2CAP connection during netdev registration bnep_add_connection() reads the L2CAP connection without holding the channel lock, then passes its HCI device to register_netdev(). Controller teardown can clear and release that connection concurrently, leaving the network device registration path to dereference a freed parent device. Retain it until register_netdev() has taken the parent device reference. A flaw was found in the Bluetooth Network Encapsulation Protocol (BNEP) module of the Linux kernel. The `bnep_add_connection()` function reads the Logical Link Control and Adaptation Protocol (L2CAP) connection without properly holding a channel lock. This can allow a local attacker to trigger a use-after-free vulnerability during network device registration, potentially leading to a system crash and denial of service. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-64513] Unconditionally recompute CR8 intercept on PPR update
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Unconditionally recompute CR8 intercept on PPR update The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits when the guest's virtual TPR falls under the specified threshold, allowing KVM to inject previously masked interrupts. KVM handles these VM exits in handle_tpr_below_threshold(). Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits") optimized this function by calling apic_update_ppr() instead of raising KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is a pending, deliverable interrupt. However, if there are no new interrupts pending, apic_update_ppr() does not issue the request. Thus, kvm_lapic_update_cr8_intercept() and vmx_update_cr8_intercept() are not called before VM entry, which results in a high, stale TPR_THRESHOLD. This is problematic due to the following sentence in 28.2.1.1 "VM-Execution Control Fields" in the SDM: The following check is performed if the “use TPR shadow” VM-execution control is 1 and the “virtualize APIC accesses” and “virtual-interrupt delivery” VM-execution controls are both 0: the value of bits 3:0 of the TPR threshold VM-execution control field should not be greater than the value of bits 7:4 of VTPR.
Medium [CVE-2026-64335] fix broken rx after throttle
In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix broken rx after throttle If the port is closed while throttled, the read urb is never resubmitted and the port will not receive any further data until the device is reconnected (or the driver is rebound). Clear the throttle flags and submit the urb if needed when opening the port. This vulnerability occurs when a port is closed while it is in a throttled state, preventing the read Urban Request Block (URB) from being resubmitted. As a result, the affected port will cease to receive any further data, leading to a denial of service (DoS) for data reception until the device is reconnected or the driver is rebound. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-64417] fix NULL pointer dereference in debugfs
In the Linux kernel, the following vulnerability has been resolved: mm: shrinker: fix NULL pointer dereference in debugfs shrinker_debugfs_add() creates both "count" and "scan" debugfs files unconditionally. That assumes every shrinker implements both count_objects() and scan_objects(), which is not guaranteed. For example, the xen-backend shrinker sets count_objects() but leaves scan_objects() NULL, so writing to its scan file calls through a NULL function pointer and panics the kernel: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. Call Trace: shrinker_debugfs_scan_write+0x12e/0x270 full_proxy_write+0x5f/0x90 vfs_write+0xde/0x420? filp_flush+0x75/0x90? filp_close+0x1d/0x30? do_dup2+0xb8/0x120 ksys_write+0x68/0xf0? filp_flush+0x75/0x90 do_syscall_64+0xb3/0x5b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The count path has the same issue in principle if a shrinker omits count_objects(). To fix it, only create "count" and "scan" debugfs files when the corresponding callbacks are present. A flaw was found in the Linux kernel's memory management (mm) shrinker subsystem. A local attacker could trigger a NULL pointer dereference by attempting to write to a scan file associated with a shrinker that has a missing `scan_objects()` callback.
Medium [CVE-2026-64483] bound the sample count to the packet payload
In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire: isight: bound the sample count to the packet payload isight_packet() takes the frame count from the device iso packet and checks it only against the device claimed iso length. count = be32_to_cpu(payload->sample_count); if (likely(count samples, count); length is the iso header data_length. It can be up to 0xffff. So the gate allows a count up to about 16379. isight_samples() then copies count frames out of payload->samples into the PCM DMA buffer. payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The device multiplexes two samples per frame. A count past the buffer size writes past runtime->dma_area. Bounding the count to MAX_FRAMES_PER_PACKET keeps both the read and the write in range. A malicious or faulty Apple iSight on the FireWire bus reaches this during a normal capture. A malicious or faulty Apple iSight device connected via FireWire can send specially crafted audio packets. The driver incorrectly processes the sample count in these packets, leading to a buffer overflow where data can be written beyond the allocated memory region. This could result in memory corruption, potentially impacting system stability or leading to further exploitation. Red Hat severity: Moderate — CVSS 6.3 (CVSS:3.1/AV:P/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-120.
Medium [CVE-2026-64450] fix out-of-bounds read in broadcast Gap ACK blocks
In the Linux kernel, the following vulnerability has been resolved: tipc: fix out-of-bounds read in broadcast Gap ACK blocks A broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in its data area. tipc_get_gap_ack_blks() only verifies that the record's len field is self-consistent with its ugack_cnt/bgack_cnt counts (sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not check that the record actually fits in the message data area, msg_data_sz(). Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
Medium [CVE-2026-64457] fix vq info pointer lookup via wrong index
In the Linux kernel, the following vulnerability has been resolved: virtio_pci: fix vq info pointer lookup via wrong index Unbinding a virtio balloon device: echo virtio0 > /sys/bus/virtio/drivers/virtio_balloon/unbind triggers a NULL pointer dereference. The dmesg says: BUG: kernel NULL pointer dereference, address: 0000000000000008 [...] RIP: 0010:__list_del_entry_valid_or_report+0x5/0xf0 Call Trace: vp_del_vqs+0x121/0x230 remove_common+0x135/0x150 virtballoon_remove+0xee/0x100 virtio_dev_remove+0x3b/0x80 device_release_driver_internal+0x187/0x2c0 unbind_store+0xb9/0xe0 kernfs_fop_write_iter.llvm.11660790530567441834+0xf6/0x180 vfs_write+0x2a9/0x3b0 ksys_write+0x5c/0xd0 do_syscall_64+0x54/0x230 entry_SYSCALL_64_after_hwframe+0x29/0x31 [...] The virtio_balloon device registers 5 queues (inflate, deflate, stats, free_page, reporting) but only the first two are unconditional. The stats, free_page and reporting queues are each conditional on their respective feature bits. When any of these features are absent, the corresponding vqs_info entry has name == NULL, creating holes in the array. The root cause is an indexing mismatch introduced when vq info storage was changed to be passed as an argument. vp_find_vqs_msix() and vp_find_vqs_intx() store the info pointer at vp_dev->vqs[i], where 'i' is the caller's sparse array index.
Medium [CVE-2026-64446] fix heap buffer overflow in rtw_cfg80211_set_wpa_ie
In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie() supplicant_ie is a 256-byte array in struct security_priv. The WPA and WPA2 IE copy paths use: memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2); where wpa_ielen is the raw IE length field (u8, 0-255). When a local user supplies a connect request via nl80211 with a crafted WPA IE of length 255, wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into the adjacent last_mic_err_time field. rtw_parse_wpa_ie() does not prevent this: its length consistency check compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255 when wpa_ie_len = 257, so the check passes silently. Add explicit bounds checks for both the WPA and WPA2 paths before the memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the supplicant_ie buffer. A local user can exploit this vulnerability by supplying a crafted Wi-Fi Protected Access (WPA) Information Element (IE) during a connection request. This can lead to a one-byte heap buffer overflow, potentially causing memory corruption and affecting system stability or leading to information disclosure. Red Hat severity: Moderate. Weakness: CWE-120.
Medium [CVE-2026-64500] Initialize completion before requesting IRQ
In the Linux kernel, the following vulnerability has been resolved: iio: adc: lpc32xx: Initialize completion before requesting IRQ In the report from Jaeyoung Chung: "lpc32xx_adc_probe() in drivers/iio/adc/lpc32xx_adc.c registers its interrupt handler with devm_request_irq() before it initializes st->completion with init_completion(). If an interrupt arrives after devm_request_irq() and before init_completion(), the handler calls complete() on an uninitialized completion, causing a kernel panic. The zeroed task_list makes list_empty() return false, so swake_up_locked() dereferences a NULL list entry, triggering a KASAN wild-memory-access." Fix the chance of a spurious IRQ causing an uninitialized pointer dereference by moving init_completion() above devm_request_irq(). A local attacker could trigger a race condition during the driver's initialization by causing a spurious interrupt. This improper handling of interrupts before completion initialization can lead to a kernel panic, resulting in a Denial of Service (DoS) for the system. Red Hat severity: Moderate. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Medium [CVE-2026-64353] Keep dynamic inner array lookups nullable
In the Linux kernel, the following vulnerability has been resolved: bpf: Keep dynamic inner array lookups nullable An ARRAY_OF_MAPS can use an array created with BPF_F_INNER_MAP as its inner map template. A concrete inner array with a different max_entries value can then replace the template. After a successful outer map lookup, the verifier represents the resulting map pointer using the inner map template. Const-key lookup nullness elision consequently uses the template max_entries even though the runtime helper uses the concrete inner map max_entries. Do not elide lookup result nullness for maps marked with BPF_F_INNER_MAP, because the template max_entries does not prove that the key is in bounds for the concrete runtime map. A flaw was found in the Linux kernel's Berkeley Packet Filter (BPF) verifier. When an inner map template is replaced by a concrete inner array with a different maximum entry size, the verifier may perform incorrect bounds checking. A local attacker could exploit this flaw by creating a specially crafted BPF program, potentially leading to out-of-bounds memory access. This could result in a denial of service or, in some cases, privilege escalation. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-787. Affected Red Hat products: Red Hat Enterprise Linux 10.
Medium [CVE-2026-64339] bound bulk IN response length to the received transfer
In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: bound bulk IN response length to the received transfer usbio_bulk_msg() copies bpkt_len = le16_to_cpu(bpkt->len) bytes out of the bulk IN buffer (usbio->rxbuf, allocated with size usbio->rxbuf_len) into the caller's buffer. bpkt_len is fully controlled by the device and is only checked against ibuf_len; ibuf_len in turn is checked against usbio->txbuf_len, not against rxbuf_len: if ((obuf_len > (usbio->txbuf_len - sizeof(*bpkt))) || (ibuf_len > (usbio->txbuf_len - sizeof(*bpkt)))) return -EMSGSIZE; txbuf_len and rxbuf_len are taken independently from the bulk OUT and bulk IN endpoint wMaxPacketSize in usbio_probe(). A malicious or malfunctioning device that advertises a large bulk OUT endpoint and a small bulk IN endpoint (e.g. by claiming one of the quirk-free IDs such as the Lattice NX33U, 0x2ac1:0x20cb) therefore makes ibuf_len, and hence the device-supplied bpkt_len, exceed rxbuf_len. memcpy() then reads up to txbuf_len - rxbuf_len bytes past the end of the rxbuf slab object. The over-read bytes are handed back to the i2c layer and on to user space through i2c-dev, disclosing adjacent slab memory; with KASAN this is reported as a slab-out-of-bounds read. The number of bytes actually received is already known: act equals the URB actual_length and is bounded by rxbuf_len.
Low [CVE-2026-66011] ImageMagick before 7.1.2-27 Memory Leak via Invalid CLI Options
ImageMagick before 7.1.2-27 contains a memory leak vulnerability in the magick command-line interface when invalid options are provided. Attackers can trigger memory exhaustion by repeatedly supplying malformed command-line arguments to consume system resources. A flaw was found in ImageMagick. This vulnerability has a Low impact as it requires local system access and user interaction to exploit. An attacker must repeatedly supply malformed command-line arguments to the `magick` utility, leading to a memory leak and potential resource exhaustion. Red Hat severity: Low — CVSS 3.3 (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7. Will not fix / out of support: Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: imagemagick.
Free weekly CVE digest
Every Monday: the week's critical and high advisories for Red Hat or every vendor, new CISA KEV entries and upcoming end-of-life dates.