VulniPulse uses Google Ads measurement to understand visits from advertisements and campaign performance. It runs cookie-free until you choose — accepting enables cookies for more accurate attribution. Rejecting keeps it cookie-free and never limits the site.
See exactly what is measuredComplete feed
4773 advisories across 32 monitored vendors.
Dag Authors, who normally should not be able to execute code in the webserver context could craft XCom payload causing the webserver to execute arbitrary code. Since Dag Authors are already highly trusted, severity of this issue is Low. Users are recommended to upgrade to Apache Airflow 3.2.0, which fixes the issue.
The Keycloak authentication manager in `apache-airflow-providers-keycloak` did not generate or validate the OAuth 2.0 `state` parameter on the login / login-callback flow, and did not use PKCE. An attacker with a Keycloak account in the same realm could deliver a crafted callback URL to a victim's browser and cause the victim to be logged into the attacker's Airflow session (login-CSRF / session fixation), where any credentials the victim subsequently stored in Airflow Connections would be harvestable by the attacker. Users are advised to upgrade `apache-airflow-providers-keycloak` to 0.7.0 or later.
Secrets in Variables saved as JSON dictionaries were not properly redacted - in case thee variables were retrieved by the user the secrets stored as nested fields were not masked. If you do not store variables with sensitive values in JSON form, you are not affected. Otherwise please upgrade to Apache Airflow 3.2.0 that has the fix implemented
Multiple NetApp products incorporate Axios. Axios versions prior to 1.15.0 and 0.31.0 are susceptible to vulnerabilities which when successfully exploited could lead to disclosure of sensitive information, addition or modification of data, or Denial of Service (DoS). Affected products: NetApp Shift Toolkit, Storage Manager for ProxMox. NetApp reports that one or more additional products remain under investigation; review the canonical advisory for current status. NetApp states there is no workaround available at this time.
Cloud Foundry UUA is vulnerable to a bypass that allows an attacker to obtain a token for any user and gain access to UAA-protected systems. This vulnerability exists when SAML 2.0 bearer assertions are enabled for a client, as the UAA accepts SAML 2.0 bearer assertions that are neither signed nor encrypted. This issue affects UUA from v77.30.0 to v78.7.0 (inclusive) and it affects CF Deployment from v48.7.0 to v54.14.0 (inclusive).
Multiple NetApp products incorporate OpenSSL. Certain versions of OpenSSL are susceptible to a vulnerability which when successfully exploited could lead to Denial of Service (DoS). Successful exploitation of this vulnerability could lead to Denial of Service (DoS). Affected products: Management Services for Element Software and NetApp HCI, NetApp HCI Baseboard Management Controller (BMC) - H610S, ONTAP tools for VMware vSphere 10. NetApp reports that one or more additional products remain under investigation; review the canonical advisory for current status. NetApp states there is no workaround available at this time.
Multiple NetApp products incorporate OpenSSH. OpenSSH versions prior to 10.3 are susceptible to a vulnerability which when successfully exploited could lead to disclosure of sensitive information, addition or modification of data, or Denial of Service (DoS). Affected products: Active IQ Unified Manager for VMware vSphere, ONTAP tools for VMware vSphere 10. NetApp reports that one or more additional products remain under investigation; review the canonical advisory for current status. NetApp states there is no workaround available at this time.
A vulnerability in the integration of single sign-on (SSO) with Control Hub in Cisco Webex Services could have allowed an unauthenticated, remote attacker to impersonate any user within the service. This vulnerability existed because of improper certificate validation. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by connecting to a service endpoint and supplying a crafted token. A successful exploit could have allowed the attacker to gain unauthorized access to legitimate Cisco Webex services. Cisco has addressed this vulnerability in the Cisco Webex service. However, customer action is necessary for affected organizations that are using trust anchors with their SSO integration. There are no workarounds that address this vulnerability. To avoid service interruption, customers who are using trust anchors with their SSO integration should upload a new identity provider (IdP) SAML certificate to Control Hub. For more information, see Manage single sign-on integration in Control Hub. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-webex-cui-cert-8jSZYhWL <br/>Security Impact Rating: Critical <br/>CVE: CVE-2026-20184
JWT Tokens used by tasks were exposed in logs. This could allow UI users to act as Dag Authors. Users are advised to upgrade to Airflow version that contains fix. Users are recommended to upgrade to version 3.2.0, which fixes this issue.
A vulnerability in the authentication service feature of Cisco AsyncOS Software for Cisco Secure Web Appliance could allow an unauthenticated, remote attacker to bypass authentication policy requirements. This vulnerability is due to improper validation of user-supplied authentication input in HTTP requests. An attacker could exploit this vulnerability by sending HTTP requests that contain specific authentication requests to an affected device. A successful exploit could allow the attacker to bypass policy enforcement on the device. There is no direct impact to the Cisco Secure Web Appliance. However, as a result of exploiting this vulnerability, an attacker could send HTTP requests that should be restricted through the device. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-wsa-auth-bypass-6YZkTQhd <br/>Security Impact Rating: Medium <br/>CVE: CVE-2026-20152
Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit these vulnerabilities, the attacker must have at least Read Only Admin credentials. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. In single-node Cisco ISE deployments, successful exploitation of these vulnerabilities could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ise-rce-4fverepv <br/>Security Impact Rating: Critical <br/>CVE: CVE-2026-20180,CVE-2026-20186
The SkyWalking OAP /debugging/config/dump endpoint may leak sensitive configuration information of MySQL/PostgreSQL. This issue affects Apache SkyWalking: from 9.7.0 through 10.3.0. Users are recommended to upgrade to version 10.4.0, which fixes the issue.
The example example_xcom that was included in airflow documentation implemented unsafe pattern of reading value from xcom in the way that could be exploited to allow UI user who had access to modify XComs to perform arbitrary execution of code on the worker. Since the UI users are already highly trusted, this is a Low severity vulnerability. It does not affect Airflow release - example_dags are not supposed to be enabled in production environment, however users following the example could replicate the bad pattern. Documentation of Airflow 3.2.0 contains version of the example with improved resiliance for that case. Users who followed that pattern are advised to adjust their implementations accordingly.
A vulnerability in the CLI of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, local attacker with administrative privileges to perform a command injection attack on the underlying operating system and elevate privileges to root. This vulnerability is due to insufficient validation of user supplied input. An attacker could exploit this vulnerability by providing crafted input to a specific CLI command. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ise-cmd-inj-5WSJcYJB <br/>Security Impact Rating: Medium <br/>CVE: CVE-2026-20136
Multiple vulnerabilities in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker with administrative write privileges to conduct a stored cross-site scripting (XSS) attack or a reflected XSS attack against a user of the web-based management interface of an affected device. These vulnerabilities are due to insufficient sanitization of user-supplied data that is stored in the web page. An attacker could exploit these vulnerabilities by convincing a user of the interface to click a specific link or view an affected web page. The injected script code may be executed in the context of the web-based management interface or allow the attacker to access sensitive browser-based information. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-isexss-BS8ctE7U <br/>Security Impact Rating: Medium <br/>CVE: CVE-2026-20132
A vulnerability in the CLI of Cisco ThousandEyes Enterprise Agent could allow an authenticated, local attacker with low privileges to overwrite arbitrary files on the local system of an affected device. This vulnerability is due to improper access controls on files that are on the local file system of an affected device. An attacker could exploit this vulnerability by placing a symbolic link in a specific location on the local file system. A successful exploit could allow the attacker to bypass file system permissions and overwrite arbitrary files on the affected device. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-te-agentfilewrite-tqUw3SMU <br/>Security Impact Rating: Medium <br/>CVE: CVE-2026-20161
Multiple vulnerabilities in Cisco Unity Connection could allow an authenticated, remote attacker to download arbitrary files from an affected system. To exploit these vulnerabilities, the attacker must have valid administrative credentials. These vulnerabilities are due to improper sanitization of user input to the web-based management interface. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request. A successful exploit could allow the attacker to download arbitrary files from an affected system. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-unity-file-download-RmKEVWPx <br/>Security Impact Rating: Medium <br/>CVE: CVE-2026-20078,CVE-2026-20081
Multiple vulnerabilities in Cisco Unity Connection could allow a remote attacker to conduct a cross-site scripting (XSS) attack, an open redirect attack, and an SQL injection attack. For more information about these vulnerabilities, see the Details section of this advisory. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-unity-vulns-n2EJSbbw <br/>Security Impact Rating: Medium <br/>CVE: CVE-2026-20059,CVE-2026-20060,CVE-2026-20061
A vulnerability in the Desktop Agent functionality of Cisco Webex Contact Center could have allowed an unauthenticated, remote attacker to conduct cross-site scripting attacks. Cisco has addressed this vulnerability in the Cisco Webex Contact Center service, and no customer action is needed. This vulnerability existed because HTML and script content was not properly handled. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by persuading a user to follow a malicious link. A successful exploit could have allowed the attacker to steal sensitive information from the browser, including authentication and session information. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-webexcc-xss-WEX5nUnA <br/>Security Impact Rating: Medium <br/>CVE: CVE-2026-20170
The `access_key` and `connection_string` connection properties were not marked as sensitive names in secrets masker. This means that user with read permission could see the values in Connection UI, as well as when Connection was accidentaly logged to logs, those values could be seen in the logs. Azure Service Bus used those properties to store sensitive values. Possibly other providers could be also affected if they used the same fields to store sensitive data. If you used Azure Service Bus connection with those values set or if you have other connections with those values storing sensitve values, you should upgrade Airflow to 3.1.8