Complete feed
Recently updated
Advisories the vendor has revised
Android app · Google Play
Take your CVE monitoring with you.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 32 official vendor sources and 160+ reviewed platform categories.
Medium [CVE-2026-64210] Fix unlocked writing to ICOSQ
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix unlocked writing to ICOSQ During napi poll, when the affinity changes and there's still XSK work to be done, we trigger an ICOSQ interrupt on the new CPU. However, this triggering on the ICOSQ is done unprotected. There are 2 such races: A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is running from a different CPU due to affinity change. This can happen because IRQ triggering is done after napi_complete_done(). At this point the NAPI can be scheduled on a different CPU. Like this: CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI) ------------------------------- -------------------------------- napi_complete_done() clears SCHED mlx5e_cq_arm(...) napi_schedule_prep() sets SCHED mlx5e_napi_poll() mlx5e_xsk_alloc_rx_mpwqe() mlx5e_icosq_sync_lock() // noop memcpy 640 B UMR body advance sq->pc by 10 mlx5e_trigger_irq(&c->icosq) wqe_info[pi] = {NOP, 1} mlx5e_post_nop() advances sq->pc B) mlx5e_trigger_irq() is called on the ICOSQ when mlx5e_trigger_napi_icosq() is running. But ICOSQ has an optimized locking scheme that doesn't work for this scenario. Kick the async ICOSQ instead which is always locked.
Medium [CVE-2026-64225] add bounds check to cgx_speed_mbps index
In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: CGX: add bounds check to cgx_speed_mbps index cgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values 0-15. If it returns a value >= 13, this causes an out-of-bounds array access. Add a bounds check and default to speed 0 if the index is out of range. Specifically, the `RESP_LINKSTAT_SPEED` function can produce an index value that exceeds the allocated size of the `cgx_speed_mbps` array, leading to memory corruption. This could result in a system crash (Denial of Service). A flaw was found in the Linux kernel octeontx2-af driver, in the CGX (Converged Gigabit Ethernet) firmware interface used by Marvell OcteonTX2 network adapters. Because this index is not validated before use, an unexpected firmware response can cause an out-of-bounds array access, leading to memory corruption and a kernel crash. This is classified as CWE-125 (Out-of-bounds Read) and results in a Denial of Service impact. Exploitation requires a system with an affected OcteonTX2 CGX-based network adapter present, consistent with the AV:L and PR:L values in the CVSS vector. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-125.
Medium [CVE-2026-64233] hold opts->lock across XU walks in uvc_function_bind
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind uvc_function_bind() walks &opts->extension_units twice without holding opts->lock: - directly, for the iExtension string-descriptor fixup loop; - indirectly, four times via uvc_copy_descriptors() (once per speed), where the helper iterates uvc->desc.extension_units (which aliases &opts->extension_units) to size and emit XU descriptors. The configfs side (uvcg_extension_make / uvcg_extension_drop, in drivers/usb/gadget/function/uvc_configfs.c) takes opts->lock around its list_add_tail / list_del operations. A privileged userspace process that holds the configfs subtree open and writes the gadget UDC name to bind the function while concurrently rmdir()'ing an extensions subdir can race uvcg_extension_drop() against the bind-time list walks and dereference a freed struct uvcg_extension. Hold opts->lock from the start of the XU string-descriptor fixup through the last uvc_copy_descriptors() call, releasing on the descriptor-error path via a new error_unlock label that drops the lock before falling through to the existing error label. This matches the locking discipline of the configfs callbacks and removes the only remaining unsynchronised reader of the XU list during bind.
Medium [CVE-2026-64245] fix a possible UAF in fb_find_mode
In the Linux kernel, the following vulnerability has been resolved: fbdev: modedb: fix a possible UAF in fb_find_mode() If mode_option is NULL, it is assigned from mode_option_buf: if (!mode_option) { fb_get_options(NULL, &mode_option_buf); mode_option = mode_option_buf; } Later, name is assigned from mode_option: const char *name = mode_option; However, mode_option_buf is freed before name is no longer used: kfree(mode_option_buf); while name is still accessed by: if ((name_matches(db[i], name, namelen) || Since name aliases mode_option_buf, this may result in a use-after-free. Fix this by extending the lifetime of mode_option_buf until the end of the function by using scope-based resource management for cleanup. A flaw was found in the Linux kernel's framebuffer device (fbdev) subsystem. Specifically, within the fb_find_mode() function, a use-after-free (UAF) vulnerability exists. This occurs because a memory buffer is released while still being referenced, potentially allowing an attacker to access or manipulate freed memory. Such an exploit could lead to system instability, denial of service, or potentially arbitrary code execution. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9.
Low [CVE-2026-17039] CA renewal request processing omits realm authorization check performed by enrollment path
A flaw was found in pki-core. The certificate authority (CA) renewal request path does not perform the realm-based authorization check that the enrollment path performs, allowing an authenticated user entitled to one realm to cause a certificate belonging to a different realm to be renewed without that realm's authorization. Red Hat Product Security assessed this issue as having Low impact. However, exploitation additionally requires a non-default, though supported, deployment configuration: a realm-mapped authorization manager configured for multi-tenant or delegated sub-CA (MSP-style) use. Deployments that do not configure this feature are not exposed to this issue. Direct testing was performed to determine the practical consequences of the confirmed bypass rather than relying on the authorization gap alone to drive severity. That testing found no confidentiality impact, since the resulting certificate's content is already retrievable by any user through the product's own standard, intended certificate-lookup functionality, independent of this issue. No private key material is exposed at any point, so the issue cannot be used for impersonation. The victim's original certificate and their own ability to renew it are both unaffected, and revocation requires a separate, unrelated authentication mechanism this issue does not touch, so there is no denial-of-service capability.
Advisory [CVE-2026-64230] fix irq_data.rdev not being assigned
In the Linux kernel, the following vulnerability has been resolved: regulator: tps65219: fix irq_data.rdev not being assigned Commit 64a6b577490c ("regulator: tps65219: Remove debugging helper function") removed the tps65219_get_rdev_by_name() helper along with the irq_data.rdev assignment that depended on it. This left irq_data.rdev uninitialized for all IRQs, causing undefined behavior when regulator_notifier_call_chain() is called from the IRQ handler: Internal error: Oops: 0000000096000004 pc: regulator_notifier_call_chain lr: tps65219_regulator_irq_handler Call trace: regulator_notifier_call_chain tps65219_regulator_irq_handler handle_nested_irq regmap_irq_thread irq_thread_fn irq_thread kthread ret_from_fork Instead of restoring a dedicated lookup array, restructure the probe function to combine regulator registration with IRQ registration in the same loop. This way the rdev returned by devm_regulator_register() is naturally available for assigning to irq_data.rdev without any auxiliary data structure. Non-regulator IRQs (SENSOR, TIMEOUT) that don't correspond to any registered regulator are registered with rdev=NULL, and the IRQ handler is protected with a NULL check to avoid crashing. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux for NVIDIA 26; Red Hat OpenShift Container Platform 4.
Advisory [CVE-2026-64238] fix deadlock on shared proxy's parent removal
In the Linux kernel, the following vulnerability has been resolved: gpio: shared: fix deadlock on shared proxy's parent removal Commit 710abda58055 ("gpio: shared: call gpio_chip::of_xlate() if set") used the mutex embedded in struct gpio_shared_entry to protect the offset field which now can be modified after assignment. The critical section however is too wide and introduced a potential deadlock on the removal of the shared GPIO proxy's parent. Make the critical section shorter - only protect the offset when it's being read. While at it: mention the fact that the entry lock is now also used to protect against concurrent access to the offset field in the structure's documentation. A too wide critical section, intended to protect the `offset` field in the `struct gpio_shared_entry`, can lead to a potential deadlock. This occurs during the removal of a shared General Purpose Input/Output (GPIO) proxy's parent. A successful exploit of this vulnerability could result in a denial of service (DoS) due to system unresponsiveness. Red Hat severity: not rated. Weakness: CWE-833. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux for NVIDIA 26; Red Hat OpenShift Container Platform 4. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Advisory [CVE-2026-64209] Fix out-of-bounds array access in dp swing config
In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usbc: Fix out-of-bounds array access in dp swing config swing_tbl and pre_emphasis_tbl are 4x4 arrays (valid indices 0-3), but the boundary check uses "> 4" instead of ">= 4", allowing index 4 to cause an out-of-bounds access. A flaw was found in the Linux kernel, specifically within the Qualcomm (QCOM) QMP USBC PHY (Physical Layer) driver. An incorrect boundary check during the configuration of DisplayPort (DP) swing settings allows for an out-of-bounds array access. This vulnerability can lead to memory corruption, potentially impacting system stability or allowing for further exploitation. Red Hat severity: not rated. Weakness: CWE-787. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Advisory [CVE-2026-64215] Check kzalloc return in a8xx_hfi_send_perf_table
In the Linux kernel, the following vulnerability has been resolved: drm/msm/a6xx: Check kzalloc return in a8xx_hfi_send_perf_table Check the return value of kzalloc() to prevent a NULL pointer dereference on allocation failure. Patchwork: This vulnerability occurs because the `a8xx_hfi_send_perf_table` function does not properly check the return value of a memory allocation call (`kzalloc`). An attacker could potentially exploit this missing check to trigger a NULL pointer dereference, leading to a system crash and a denial of service. Red Hat severity: not rated. Weakness: CWE-476. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Advisory [CVE-2026-64250] Report dying CPU to RCU in stop_this_cpu
In the Linux kernel, the following vulnerability has been resolved: LoongArch: Report dying CPU to RCU in stop_this_cpu() This is a port of MIPS commit 9f3f3bdc6d9dac1 ("MIPS: smp: report dying CPU to RCU in stop_this_cpu()"). smp_send_stop() parks all secondary CPUs in stop_this_cpu(). And the function marks the CPU offline for the scheduler via set_cpu_online(false) but never informs RCU, so RCU keeps expecting a quiescent state from CPUs that are now spinning forever with interrupts disabled. As long as nothing waits for an RCU grace period after smp_send_stop() this is harmless, which is why it went unnoticed. However, since commit 91840be8f710370 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT"), irq_work_sync() calls synchronize_rcu() on architectures without an irq_work self-IPI, i.e. where arch_irq_work_has_interrupt() returns false. Any irq_work_sync() issued in the reboot/shutdown/halt path after smp_send_stop() then blocks on a grace period that can never complete, hanging the reboot: WARNING: CPU: 0 PID: 15 at kernel/irq_work.c:144 irq_work_queue_on... rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: Offline CPU 1 blocking current GP. rcu: Offline CPU 2 blocking current GP. rcu: Offline CPU 3 blocking current GP.
Advisory [CVE-2026-64241] teardown bugs and resource leaks
In the Linux kernel, the following vulnerability has been resolved: gpio: rockchip: teardown bugs and resource leaks Address several teardown issues and resource leaks in the driver's remove path and error handling: 1. Debounce clock reference leak: The debounce clock (bank->db_clk) is obtained using of_clk_get() which increments the clock's reference count, but clk_put() is never called. Register a devm action to cleanly release it on unbind. Note that of_clk_get(..., 1) remains necessary over devm_clk_get() because the DT binding does not define clock-names, precluding name-based lookup. 2. Unregistered chained IRQ handler: The chained IRQ handler is not disconnected in remove(). If a stray interrupt fires after the driver is removed, the kernel attempts to execute a stale handler, leading to a panic. 3. IRQ domain leak: The linear IRQ domain and its generic chips are allocated manually during probe but never removed. Remove the IRQ domain during driver teardown to free the associated generic chips and mappings. [Bartosz: don't emit an error message on devres allocation failure] Red Hat severity: not rated. Weakness: CWE-772. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Advisory [CVE-2026-64249] fix use-after-free in child_regions_with_firmware
In the Linux kernel, the following vulnerability has been resolved: fpga: region: fix use-after-free in child_regions_with_firmware() Move of_node_put(child_region) after the error print to avoid accessing freed memory when pr_err() references child_region. [ Yilun: Fix the Fixes tag ] Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Advisory [CVE-2026-64252] Prevent initial console buffer from landing in XKPHYS
In the Linux kernel, the following vulnerability has been resolved: MIPS: DEC: Prevent initial console buffer from landing in XKPHYS In 64-bit configurations calling the initial console output handler from a kernel thread other than the initial one will result in a situation where the stack has been placed in the XKPHYS 64-bit memory segment and consequently so has been the buffer allocated there that is used as the argument corresponding to the `%s' output conversion specifier for the firmware's printf() entry point. This 64-bit address will then be truncated by 32-bit firmware, resulting in an attempt to access the wrong memory location, which in turn will cause all kinds of unpredictable behaviour, such as a kernel crash: Console: colour dummy device 160x64 Calibrating delay loop...
Advisory [CVE-2026-64211] Don't queue workqueue handlers to never-online CPUs
In the Linux kernel, the following vulnerability has been resolved: srcu: Don't queue workqueue handlers to never-online CPUs While an srcu_struct structure is in the midst of switching from CPU-0 to all-CPUs state, it can attempt to invoke callbacks for CPUs that have never been online. Worse yet, it can attempt in invoke callbacks for CPUs that never will be online, even including imaginary CPUs not in cpu_possible_mask. This can cause hangs on s390, which is not set up to deal with workqueue handlers being scheduled on such CPUs. This commit therefore causes Tree SRCU to refrain from queueing workqueue handlers on CPUs that have not yet (and might never) come online. Because callbacks are not invoked on CPUs that have not been online, it is an error to invoke call_srcu(), synchronize_srcu(), or synchronize_srcu_expedited() on a CPU that is not yet fully online. However, it turns out to be less code to redirect the callbacks from too-early invocations of call_srcu() than to warn about such invocations. This commit therefore also redirects callbacks queued on not-yet-fully-online CPUs to the boot CPU. During certain CPU state transitions, the kernel's srcu_struct mechanism may attempt to schedule tasks on processors that are not active or will never be online.
Advisory [CVE-2026-64248] report dying CPU to RCU in stop_this_cpu
In the Linux kernel, the following vulnerability has been resolved: MIPS: smp: report dying CPU to RCU in stop_this_cpu() smp_send_stop() parks all secondary CPUs in stop_this_cpu(). The function marks the CPU offline for the scheduler via set_cpu_online(false) but never informs RCU, so RCU keeps expecting a quiescent state from CPUs that are now spinning forever with interrupts disabled. As long as nothing waits for an RCU grace period after smp_send_stop() this is harmless, which is why it went unnoticed. Since commit 91840be8f710 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT") however, irq_work_sync() calls synchronize_rcu() on architectures without an irq_work self-IPI, i.e. where arch_irq_work_has_interrupt() returns false. That is the asm-generic default used by MIPS. Any irq_work_sync() issued in the reboot/shutdown path after smp_send_stop() then blocks on a grace period that can never complete, hanging the reboot: WARNING: CPU: 0 PID: 15 at kernel/irq_work.c:144 irq_work_queue_on... rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: Offline CPU 1 blocking current GP. rcu: Offline CPU 2 blocking current GP. rcu: Offline CPU 3 blocking current GP.
Advisory [CVE-2026-64242] Fix double free in probe error path
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: net2280: Fix double free in probe error path usb_initialize_gadget() installs gadget_release() as the release callback for the embedded gadget device. The struct net2280 instance is therefore released through gadget_release() when the gadget device's last reference is dropped. The probe error path calls net2280_remove(), which tears down the partially initialized device and drops the gadget reference with usb_put_gadget(). Calling kfree(dev) afterwards can free the same object again. Drop the explicit kfree() and let the gadget device release callback handle the final free. This issue was found by a static analysis tool I am developing. When a gadget device is being initialized, an error can cause the device to be freed twice, leading to memory corruption. This can result in a denial of service, making the system unstable or unresponsive. Red Hat severity: not rated. Weakness: CWE-1341. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Advisory [CVE-2026-64236] fix division by zero on missing clock-frequency
In the Linux kernel, the following vulnerability has been resolved: i2c: davinci: fix division by zero on missing clock-frequency When the 'clock-frequency' property is missing from the device tree, the driver falls back to DAVINCI_I2C_DEFAULT_BUS_FREQ. However, this macro was defined in kHz (100), whereas the device tree property is expected in Hz. The probe function divided the fallback value by 1000, causing integer truncation that resulted in dev->bus_freq = 0. This triggered a deterministic division-by-zero kernel panic when calculating clock dividers later in the probe sequence. Fix this by redefining DAVINCI_I2C_DEFAULT_BUS_FREQ in Hz (100000) to match the expected device tree property unit, allowing the existing division logic to work correctly for both cases. This vulnerability can be triggered by a local attacker providing a malformed device tree, resulting in a kernel panic and a denial of service. Red Hat severity: not rated. Weakness: CWE-369. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Advisory [CVE-2026-64246] fix use-after-free in the linkstation_poweroff_init
In the Linux kernel, the following vulnerability has been resolved: power: reset: linkstation-poweroff: fix use-after-free in the linkstation_poweroff_init() Move of_node_put(dn) after the of_match_node() call, which still needs the node pointer. The node reference is correctly released after use. An issue exists where a use-after-free vulnerability occurs due to incorrect handling of a node pointer in the linkstation_poweroff_init() function. This flaw could lead to memory corruption, potentially causing system instability or denial of service. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Advisory [CVE-2026-64234] add check for dma_alloc_coherent
In the Linux kernel, the following vulnerability has been resolved: tty: serial: pch_uart: add check for dma_alloc_coherent() Add a check for dma_alloc_coherent() failure to prevent a potential NULL pointer dereference in dma_handle_rx(). Properly release DMA channels and the PCI device reference using a goto ladder if the allocation fails. A flaw was found in the Linux kernel's `tty` subsystem, specifically within the `pch_uart` serial driver. This vulnerability occurs due to a missing check for the return value of `dma_alloc_coherent()`. An attacker could potentially exploit this to trigger a NULL pointer dereference in the `dma_handle_rx()` function, leading to a system crash and a Denial of Service (DoS). Red Hat severity: not rated. Weakness: CWE-476. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Advisory [CVE-2026-64240] fix control request setup packet
In the Linux kernel, the following vulnerability has been resolved: media: rc: igorplugusb: fix control request setup packet Commit eac69475b01f ("media: rc: igorplugusb: heed coherency rules") changed the control request storage from an embedded struct to an allocated pointer so it can obey DMA coherency rules. However, the driver still passes &ir->request to usb_fill_control_urb(). That points the URB setup packet at the pointer field itself rather than at the allocated struct usb_ctrlrequest. USB core then interprets pointer bytes as the setup packet. This can produce an invalid bRequestType and trigger the control direction warning reported by syzbot: usb 2-1: BOGUS control dir, pipe 80003580 doesn't match bRequestType 0 Pass ir->request itself as the setup packet. As a result, the USB core misinterprets the data, leading to an invalid request type and triggering a control direction warning. This issue could potentially cause a denial of service for the affected USB device. Red Hat severity: not rated. Weakness: CWE-843. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.