VulniPulse uses Google Ads measurement to understand visits from advertisements and campaign performance. It runs cookie-free until you choose — accepting enables cookies for more accurate attribution. Rejecting keeps it cookie-free and never limits the site.
See exactly what is measuredComplete feed
3552 advisories across 32 monitored vendors.
In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix integer overflow in UNMAP bounds check sbc_execute_unmap() checks LBA + range does not exceed the device capacity, but does not guard against LBA + range wrapping around on 64-bit overflow. Add an overflow check matching the pattern already used for WRITE_SAME in the same file. The `sbc_execute_unmap()` function, which handles UNMAP operations, is vulnerable to an integer overflow. This vulnerability occurs because the bounds check for the Logical Block Address (LBA) and range does not prevent a 64-bit overflow. An attacker could potentially exploit this to cause a denial of service (DoS) or trigger unintended memory access. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-190. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE.
In the Linux kernel, the following vulnerability has been resolved: s390/bpf: Zero-extend bpf prog return values and kfunc arguments s390x ABI requires callers to zero-extend unsigned arguments and sign-extend signed arguments, and callees to zero-extend unsigned return values and sign-extend signed return values. s390 BPF JIT currently implements only sign extension. Fix this omission and implement zero extension too. A flaw was found in the Linux kernel's BPF (Berkeley Packet Filter) JIT (Just-In-Time) compiler for the s390x architecture. This could lead to unexpected behavior or data integrity issues when BPF programs interact with kernel functions on s390x systems. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-681. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.
In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential null-ptr-deref in decode_choose_args() A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself contains a CRUSH map. When decoding this CRUSH map in crush_decode(), an array of max_buckets CRUSH buckets is decoded, where some indices may not refer to actual buckets and are therefore set to NULL. The received CRUSH map may optionally contain choose_args that get decoded in decode_choose_args(). When decoding a crush_choose_arg_map, a series of choose_args for different buckets is decoded, with the bucket_index being read from the incoming message. It is only checked that the bucket index does not exceed max_buckets, but not that it doesn't point to an index with a NULL bucket. If a (potentially corrupted) message contains a crush_choose_arg_map including such a bucket_index, a null pointer dereference may occur in the subsequent processing when attempting to access the bucket with the given index. This patch fixes the issue by extending the affected check. When processing a `CEPH_MSG_OSD_MAP` message containing a specially crafted CRUSH map, a remote attacker could potentially trigger a null pointer dereference. This issue arises during the decoding of `crush_choose_arg_map` if a `bucket_index` refers to a non-existent bucket.
In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check The nf_osf_ttl() function accessed skb->dev to perform a local interface address lookup without verifying that the device pointer was valid. Additionally, the implementation utilized an in_dev_for_each_ifa_rcu loop to match the packet source address against local interface addresses. It assumed that packets from the same subnet should not see a decrement on the initial TTL. A packet might appear it is from the same subnet but it actually isn't especially in modern environments with containers and virtual switching. Remove the device dereference and interface loop. Replace the logic with a switch statement that evaluates the TTL according to the ttl_check. This vulnerability could allow a local attacker to trigger a system crash, resulting in a Denial of Service (DoS). Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-476. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.
In the Linux kernel, the following vulnerability has been resolved: sched/fair: Clear rel_deadline when initializing forked entities A yield-triggered crash can happen when a newly forked sched_entity enters the fair class with se->rel_deadline unexpectedly set. The failing sequence is: 1. A task is forked while se->rel_deadline is still set. 2. __sched_fork() initializes vruntime, vlag and other sched_entity state, but does not clear rel_deadline. 3. On the first enqueue, enqueue_entity() calls place_entity(). 4. Because se->rel_deadline is set, place_entity() treats se->deadline as a relative deadline and converts it to an absolute deadline by adding the current vruntime. 5. However, the forked entity's deadline is not a valid inherited relative deadline for this new scheduling instance, so the conversion produces an abnormally large deadline. 6. If the task later calls sched_yield(), yield_task_fair() advances se->vruntime to se->deadline. 7. The inflated vruntime is then used by the following enqueue path, where the vruntime-derived key can overflow when multiplied by the entity weight. 8. This corrupts cfs_rq->sum_w_vruntime, breaks EEVDF eligibility calculation, and can eventually make all entities appear ineligible. pick_next_entity() may then return NULL unexpectedly, leading to a later NULL dereference. A captured trace shows the effect clearly.
In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix VM_BIND UNMAP locking Wrong argument meant that the objs involved in UNMAP ops were not always getting locked. Since _NO_SHARE objs share a common resv with the VM (which is always locked) this would only show up with non-_NO_SHARE BOs. Patchwork: https://patchwork.freedesktop.org/patch/713898/ A flaw was found in the Linux kernel's Direct Rendering Manager (DRM) subsystem, specifically within the Qualcomm Adreno GPU (MSM) driver. This could potentially lead to unexpected system behavior or instability, particularly with non-shared buffer objects, impacting system reliability. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-413. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix af_unix null-ptr-deref in proto update unix_stream_connect() sets sk_state (`WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED)`) _before_ it assigns a peer (`unix_peer(sk) = newsk`). sk_state == TCP_ESTABLISHED makes sock_map_sk_state_allowed() believe that socket is properly set up, which would include having a defined peer. IOW, there's a window when unix_stream_bpf_update_proto() can be called on socket which still has unix_peer(sk) == NULL. CPU0 bpf CPU1 connect -------- ------------ WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED) sock_map_sk_state_allowed(sk) ... sk_pair = unix_peer(sk) sock_hold(sk_pair) sock_hold(newsk) smp_mb__after_atomic() unix_peer(sk) = newsk BUG: kernel NULL pointer dereference, address: 0000000000000080 RIP: 0010:unix_stream_bpf_update_proto+0xa0/0x1b0 Call Trace: sock_map_link+0x564/0x8b0 sock_map_update_common+0x6e/0x340 sock_map_update_elem_sys+0x17d/0x240 __sys_bpf+0x26db/0x3250 __x64_sys_bpf+0x21/0x30 do_syscall_64+0x6b/0x3a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Initial idea was to move peer assignment _before_ the sk_state update[1], but that involved an additional memory barrier, and changing the hot path was rejected.
In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Fix off-by-one in check_imm signed range check check_imm(bits, imm) is used in the arm64 BPF JIT to verify that a branch displacement (in arm64 instruction units) fits into the signed N-bit immediate field of a B, B.cond or CBZ/CBNZ encoding before it is handed to the encoder. The macro currently tests for (imm > 0 && imm >> bits) || (imm < 0 && ~imm >> bits) which admits values in [-2^N, 2^N) — effectively a signed (N+1)-bit range. A signed N-bit field only holds [-2^(N-1), 2^(N-1)), so the check admits one extra bit of range on each side. In particular, for check_imm19(), values in [2^18, 2^19) slip past the check but do not fit into the 19-bit signed imm19 field of B.cond. aarch64_insn_encode_immediate() then masks the raw value into the 19-bit field, setting bit 18 (the sign bit) and flipping a forward branch into a backward one. Same class of issue exists for check_imm26() and the B/BL encoding. Shift by (bits - 1) instead of bits so the actual signed N-bit range is enforced. Specifically, an off-by-one error exists in the BPF (Berkeley Packet Filter) JIT (Just-In-Time) compiler when handling immediate values for branch instructions on ARM64 architectures. This vulnerability allows the system to process values outside their intended range, which can lead to incorrect program execution flow.
In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in __ceph_x_decrypt() In __ceph_x_decrypt(), a part of the buffer p is interpreted as a ceph_x_encrypt_header, and the magic field of this struct is accessed. This happens without any guarantee that the buffer is large enough to hold this struct. The function parameter ciphertext_len represents the length of the ciphertext to decrypt and is guaranteed to be at most the remaining size of the allocated buffer p. However, this value is not necessarily greater than sizeof(ceph_x_encrypt_header). E.g., a message frame of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to hold the ciphertext at its end with a ciphertext_len of 8 or less, can trigger an out-of-bounds memory access when accessing hdr->magic. This patch fixes the issue by adding a check to ensure that the decrypted plaintext in the buffer is large enough to represent at least the ceph_x_encrypt_header. A remote attacker could trigger an out-of-bounds memory access in the `__ceph_x_decrypt()` function by sending a specially crafted message frame of type `FRAME_TAG_AUTH_REPLY_MORE` with a small ciphertext length. This vulnerability arises because the function interprets a buffer as a `ceph_x_encrypt_header` without ensuring the buffer is large enough.
In the Linux kernel, the following vulnerability has been resolved: af_unix: Drop all SCM attributes for SOCKMAP. SOCKMAP can hide inflight fd from AF_UNIX GC. When a socket in SOCKMAP receives skb with inflight fd, sk_psock_verdict_data_ready() looks up the mapped socket and enqueue skb to its psock->ingress_skb. Since neither the old nor the new GC can inspect the psock queue, the hidden skb leaks the inflight sockets. Note that this cannot be detected via kmemleak because inflight sockets are linked to a global list. In addition, SOCKMAP redirect breaks the Tarjan-based GC's assumption that unix_edge.successor is always alive, which is no longer true once skb is redirected, resulting in use-after-free below. [0] Moreover, SOCKMAP does not call scm_stat_del() properly, so unix_show_fdinfo() could report an incorrect fd count. sk_msg_recvmsg() does not support any SCM attributes in the first place. A flaw was found in the Linux kernel's af_unix component, specifically within its SOCKMAP feature. This vulnerability stems from the kernel's improper handling of Socket Control Message (SCM) attributes when data is passed to the SOCKMAP layer. This can lead to a use-after-free condition, which may allow an attacker to cause system instability or a denial of service. The issue also contributes to resource leaks of file descriptors and inaccurate reporting of file descriptor counts.
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: don't use simple_strtoul Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(), and ct_sip_parse_request() with a new sip_parse_port() helper that validates each digit against the buffer limit, eliminating the use of simple_strtoul() which assumes NUL-terminated strings. The previous code dereferenced pointers without bounds checks after sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated skb data. A port that reaches the buffer limit without a trailing character is also rejected as malformed. Also get rid of all simple_strtoul() usage in conntrack, prefer a stricter version instead. There are intentional changes: - Bail out if number is > UINT_MAX and indicate a failure, same for too long sequences. While we do accept 05535 as port 5535, we will not accept e.g. 'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261, we should restrict this to not waste cycles when presented with malformed packets with 64k '0' characters. - Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch 'expire=' and 'rports='; both are expected to use base-10. - In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k range. - epaddr_len now returns 0 if the port is invalid, as it already does for invalid ip addresses.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm() assumes it is held, and if conn is deleted concurrently -> UAF. Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen, and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred listening socket code paths, hci_connect_cfm(conn) is called with hdev->lock held. Improper handling of locking within the `hci_conn_request_evt()` function, particularly when the `HCI_PROTO_DEFER` protocol is active, can result in a Use-After-Free (UAF) vulnerability. This condition arises when a connection object is accessed after it has been deallocated, potentially allowing a local attacker to cause a system crash or execute arbitrary code. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-364. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE.
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: fix missing expect put in obj eval nft_ct_expect_obj_eval() allocates an expectation and may call nf_ct_expect_related(), but never drops its local reference. Add nf_ct_expect_put(exp) before return to balance allocation. This oversight leads to a resource leak, which could potentially allow a local attacker to cause a denial of service by exhausting system resources. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.
In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix refcount saturation and potential UAF in qrtr_port_remove In qrtr_port_remove(), the socket reference count is decremented via __sock_put() before the port is removed from the qrtr_ports XArray and before the RCU grace period elapses. This breaks the fundamental RCU update paradigm. It exposes a race window where a concurrent RCU reader (such as qrtr_reset_ports() or qrtr_port_lookup()) can obtain a pointer to the socket from the XArray, and attempt to call sock_hold() on a socket whose reference count has already dropped to zero. This exact race condition was hit during syzkaller fuzzing, leading to the following refcount saturation warning and a potential Use-After-Free: refcount_t: saturated; leaking memory. WARNING: CPU: 3 PID: 1273 at lib/refcount.c:22 refcount_warn_saturate+0xae/0x1d0 Modules linked in: qrtr(+) bochs drm_shmem_helper ...
In the Linux kernel, the following vulnerability has been resolved: net: ena: PHC: Fix potential use-after-free in get_timestamp Move the phc->active check and resp pointer assignment to after acquiring the spinlock. Previously, phc->active was checked without holding the lock, and resp was cached from ena_dev->phc.virt_addr before the lock was acquired. If ena_com_phc_destroy() runs between the lockless active check and the lock acquisition, it sets active=false, releases the lock, frees the DMA memory, and sets virt_addr=NULL. The get_timestamp path would then read a NULL virt_addr and dereference it. With both the active check and the pointer read under the lock, destroy cannot free the memory while get_timestamp is using it. A flaw was found in the Linux kernel's Elastic Network Adapter (ENA) driver, specifically within the Precision Time Protocol Hardware Clock (PHC) timestamp retrieval function. A race condition exists where the `get_timestamp` function could attempt to access memory that has already been freed by the `ena_com_phc_destroy` function. This use-after-free vulnerability can lead to a NULL pointer dereference, potentially causing a system crash and resulting in a Denial of Service (DoS). Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_ldisc: Clear HCI_UART_PROTO_INIT on error When hci_register_dev() fails in hci_uart_register_dev() HCI_UART_PROTO_INIT is not cleared before calling hu->proto->close(hu) and setting hu->hdev to NULL. This means incoming UART data will reach the protocol-specific recv handler in hci_uart_tty_receive() after resources are freed. The write lock ensures all active readers have completed and no new reader can enter the protocol recv path before resources are freed. This allows the protocol-specific recv functions to remove the "HCI_UART_REGISTERED" guard without risking a null pointer dereference if hci_register_dev() fails. A flaw was found in the Linux kernel's Bluetooth Host Controller Interface (HCI) Universal Asynchronous Receiver/Transmitter (UART) driver. When the `hci_register_dev()` function fails, a flag indicating protocol initialization is not properly cleared. This oversight allows incoming UART data to be processed by the protocol-specific receive handler after its associated resources have been released, potentially leading to a null pointer dereference. This vulnerability could result in a system crash, causing a Denial of Service (DoS). Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825.
In the Linux kernel, the following vulnerability has been resolved: NFSD: fix nfs4_file access extra count in nfsd4_add_rdaccess_to_wrdeleg In nfsd4_add_rdaccess_to_wrdeleg, if fp->fi_fds[O_RDONLY] is already set by another thread, __nfs4_file_get_access should not be called to increment the nfs4_file access count since that was already done by the thread that added READ access to the file. The extra fi_access count in nfs4_file can prevent the corresponding nfsd_file from being freed. When stopping nfs-server service, these extra access counts trigger a BUG in kmem_cache_destroy() that shows nfsd_file object remaining on __kmem_cache_shutdown. This problem can be reproduced by running the Git project's test suite over NFS. An issue with file access counting in the nfsd4_add_rdaccess_to_wrdeleg function can lead to an extra access count for nfs4_file objects. This prevents the proper freeing of associated resources when the NFS server service is stopped. Consequently, this can trigger a system bug during shutdown, potentially leading to a Denial of Service (DoS) condition. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-911. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE.
Libreswan, via the function RSA_authenticate_hash_signature_raw_rsa(), did not correctly verify the length of the authentication hash when the SIG payload of an IKEv1 packet was encoded using PKCS #1 RSA Encryption as per RFC 2313. A remote attacker can use a variation on the Bleichenbacher attack to forge the SIG payload when small public exponents are being used (e.g., e=3), which could lead to impersonation. Additionally, a remote attacker, by encoding a shorter than expected hash in the SIG payload, could trigger an assertion leading to denial-of-service. The daemon aborts and restarts; continued exploitation causes sustained denial of service. Remote code execution is not possible. X.509 certificate verifications of remote IKE peers are not affected. A remote, unauthenticated attacker could exploit this vulnerability by sending a specially crafted IKEv1 packet containing a shorter-than-expected hash payload. This triggers an assertion failure within the Libreswan daemon, causing it to crash and restart, leading to a persistent Denial of Service (DoS) condition if malicious packets are continuously transmitted. Additionally, if the target system relies on RSA keys with weak public exponents (e.g., e=3), a Bleichenbacher-style signature forgery attack may be feasible, potentially allowing the attacker to bypass authentication entirely.
Libreswan, via the function RSA_authenticate_hash_signature_pkcs1_1_5_rsa(), did not correctly verify the DER encoding of the ASN.1 digest when the IKEv2 AUTH payload was encoded using RSASSA-PKCS1-v1_5 (RFC 8017). A remote attacker can use a variation on the Bleichenbacher attack to forge the AUTH payload when small public exponents are used (e.g., e=3), leading to impersonation. Additionally, a remote attacker, by encoding a shorter than expected hash in the AUTH payload, could trigger an assertion leading to denial-of-service. The daemon aborts and restarts; continued exploitation causes sustained denial of service. Remote code execution is not possible. X.509 certificate verifications of the remote IKE peer are not affected. A flaw was found in Libreswan's implementation of IKEv2 authentication when processing signatures utilizing the RSASSA-PKCS1-v1_5 scheme. A remote, unauthenticated attacker could exploit this vulnerability by sending a maliciously crafted IKEv2 AUTH payload with a shorter-than-expected hash value. This triggers an internal assertion failure, causing the Libreswan daemon to abort and restart, leading to a Denial of Service (DoS). Furthermore, if the Libreswan gateway accepts connections using weak public RSA exponents (such as e=3), an attacker could execute a Bleichenbacher-style signature forgery attack to achieve an authentication bypass.
An invalidly formatted IKEv2 fragment causes the Libreswan pluto daemon to crash and restart. Continued exploitation would cause a denial of service. The function reassemble_v2_incoming_fragments() would ignore unknown outer payloads but still store these in a fixed size array msg_digest.digest[PAYLIMIT]. An off-by-one error in the assertion PASSERT(logger, md->digest_roof < elemsof(md->digest)) causes the daemon to abort. No remote code execution is possible. Any configuration that allows IKEv2 connections that do not set fragmentation=no are vulnerable. IKEv1 is not affected. A flaw was found in Libreswan's IKEv2 fragment reassembly mechanism. When a VPN gateway processes incoming split network packets (fragments) containing unexpected data, an off-by-one boundary validation error triggers an internal program safety check (assertion failure). While this flaw does not allow data theft or unauthorized system access, a continuous stream of these packets will lead to a persistent Denial of Service (DoS) for legitimate VPN users. Red Hat Product Security rates this vulnerability as having an Important impact, primarily because it can be exploited remotely without authentication. However, the actual exposure depends entirely on your specific VPN configuration: ``` Affected Configurations: This vulnerability only impacts IKEv2 connections.