VulniPulse uses Google Ads measurement to understand visits from advertisements and campaign performance. It runs cookie-free until you choose — accepting enables cookies for more accurate attribution. Rejecting keeps it cookie-free and never limits the site.
See exactly what is measuredComplete feed
3553 advisories across 32 monitored vendors.
In the Linux kernel, the following vulnerability has been resolved: gfs2: prevent NULL pointer dereference during unmount When flushing out outstanding glock work during an unmount, gfs2_log_flush() can be called when sdp->sd_jdesc has already been deallocated and sdp->sd_jdesc is NULL. Commit 35264909e9d1 ("gfs2: Fix NULL pointer dereference in gfs2_log_flush") added a check for that to gfs2_log_flush() itself, but it missed the sdp->sd_jdesc dereference in gfs2_log_release(). This happens because `gfs2_log_flush()` is called when a critical data structure (`sdp->sd_jdesc`) has already been deallocated, and a subsequent dereference in `gfs2_log_release()` lacks a necessary NULL check. An attacker could potentially exploit this to cause a system crash, leading to a Denial of Service (DoS). Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE.
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stale offload->prog pointer after constant blinding When a dev-bound-only BPF program (BPF_F_XDP_DEV_BOUND_ONLY) undergoes JIT compilation with constant blinding enabled (bpf_jit_harden >= 2), bpf_jit_blind_constants() clones the program. The original prog is then freed in bpf_jit_prog_release_other(), which updates aux->prog to point to the surviving clone, but fails to update offload->prog. When the network namespace is subsequently destroyed, cleanup_net() triggers bpf_dev_bound_netdev_unregister(), which iterates ondev->progs and calls __bpf_prog_offload_destroy(offload->prog). Accessing the freed prog causes a page fault: BUG: unable to handle page fault for address: ffffc900085f1038 Workqueue: netns cleanup_net RIP: 0010:__bpf_prog_offload_destroy+0xc/0x80 Call Trace: __bpf_offload_dev_netdev_unregister+0x257/0x350 bpf_dev_bound_netdev_unregister+0x4a/0x90 unregister_netdevice_many_notify+0x2a2/0x660 ... cleanup_net+0x21a/0x320 The test sequence that triggers this reliably is: 1. Set net.core.bpf_jit_harden=2 (echo 2 > /proc/sys/net/core/bpf_jit_harden) 2.
In the Linux kernel, the following vulnerability has been resolved: vdpa: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. This vulnerability occurs because a specific field, `driver_override`, is accessed without proper locking during the driver's initialization process. An attacker could exploit this Use-After-Free (UAF) condition to potentially execute arbitrary code or cause a system crash (Denial of Service). Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-413. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.
In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in osdmap_decode() When decoding osd_state and osd_weight from an incoming osdmap in osdmap_decode(), both are decoded for each osd, i.e., map->max_osd times. The ceph_decode_need() check only accounts for sizeof(*map->osd_weight) once. This can potentially result in an out-of-bounds memory access if the incoming message is corrupted such that the max_osd value exceeds the actual content of the osdmap message. This vulnerability, located within the `osdmap_decode()` function, can lead to an out-of-bounds memory access. A remote attacker could exploit this by sending a specially crafted and corrupted `osdmap` message, where the `max_osd` value exceeds the actual message content. This could potentially result in system instability or other unforeseen impacts due to memory corruption. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-1284. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.
concurrent-ruby is a modern concurrency tools for Ruby. Prior to 1.3.7, Concurrent::ReadWriteLock#release_write_lock does not verify that the calling thread acquired the write lock. Any thread with access to the lock object can release an active write lock held by another thread. A second writer can then enter its critical section while the first writer is still running. Concurrent::ReadWriteLock#release_read_lock also decrements the shared counter even when no read lock is held. Calling it on a fresh lock changes the counter from 0 to -1, after which normal read acquisition raises Concurrent::ResourceLimitError. This is a synchronization correctness issue in the public Concurrent::ReadWriteLock API. This vulnerability is fixed in 1.3.7. A flaw was found in concurrent-ruby, a Ruby library for managing concurrent operations. The `Concurrent::ReadWriteLock` component contains a synchronization issue where write locks can be released by unauthorized threads. This could allow multiple threads to write concurrently, potentially leading to data corruption. Furthermore, an issue with read lock management can cause a denial of service (DoS) by preventing legitimate read operations. This is essentially a library misuse scenario. The attack requires local code execution in the same Ruby process AND use of the manual locking API (ReadWriteLock).
ImageMagick before 7.1.2-19 contains an out-of-bounds access vulnerability in ConnectedComponentsImage() when processing connected-components artifacts with invalid indices. Attackers can trigger access violations by specifying malformed connected-components definitions via CLI, causing denial of service or potential code execution. By passing malformed connected-components definitions through the CLI, an attacker can cause a denial of service or potentially execute arbitrary code. Exploitation requires local user interaction via the CLI and can result in a denial of service or arbitrary code execution. Red Hat severity: Low — CVSS 3.3 (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L). Affected Red Hat products: Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7. Will not fix / out of support: Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7. Red Hat does not currently list a fixing RHSA for this CVE.
ImageMagick before 7.1.2-15 contains a memory leak vulnerability in multiple coders that write raw pixel data where allocated objects are not properly freed. Attackers can trigger this leak by processing specially crafted images, causing memory exhaustion and denial of service. A flaw was found in ImageMagick. Red Hat severity: Low — CVSS 3.7 (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L). Affected Red Hat products: Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7. Will not fix / out of support: Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7. Red Hat does not currently list a fixing RHSA for this CVE.
In the Linux kernel, the following vulnerability has been resolved: xfrm: ipcomp: Free destination pages on acomp errors Move the out_free_req label up by a couple of lines so that the allocated dst SG list gets freed on error as well as success. A flaw was found in the Linux kernel's xfrm IPcomp (IP Payload Compression Protocol) component. This vulnerability involves improper memory deallocation during error handling, where allocated resources are not correctly freed. This could allow a local attacker to cause resource exhaustion, potentially leading to a Denial of Service (DoS) on the system. Red Hat severity: not rated. Weakness: CWE-772. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL pointer dereference in bpf_sk_storage_clone and diag paths bpf_selem_unlink_nofail() sets SDATA(selem)->smap to NULL before removing the selem from the storage hlist. A concurrent RCU reader in bpf_sk_storage_clone() can observe the selem still on the list with smap already NULL, causing a NULL pointer dereference. general protection fault, probably for non-canonical address 0xdffffc000000000a: KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057] RIP: 0010:bpf_sk_storage_clone+0x1cd/0xaa0 net/core/bpf_sk_storage.c:174 Call Trace: <IRQ> sk_clone+0xfed/0x1980 net/core/sock.c:2591 inet_csk_clone_lock+0x30/0x760 net/ipv4/inet_connection_sock.c:1222 tcp_create_openreq_child+0x35/0x2680 net/ipv4/tcp_minisocks.c:571 tcp_v4_syn_recv_sock+0x123/0xf90 net/ipv4/tcp_ipv4.c:1729 tcp_check_req+0x8e1/0x2580 include/net/tcp.h:855 tcp_v4_rcv+0x1845/0x3b80 net/ipv4/tcp_ipv4.c:2347 Add a NULL check for smap in bpf_sk_storage_clone(). bpf_sk_storage_diag_put_all() has the same issue. Add a NULL check and pass the validated smap directly to diag_get(), which is refactored to take smap as a parameter instead of reading it internally. bpf_sk_storage_diag_put() uses diag->maps[i] which is always valid under its refcount, so diag->maps[i] is passed directly to diag_get().
In the Linux kernel, the following vulnerability has been resolved: batman-adv: fix tp_meter counter underflow during shutdown batadv_tp_sender_shutdown() unconditionally decrements the "sending" atomic counter. If multiple paths (e.g. timeout, user cancel, and normal finish) call this function, the counter can underflow to -1. Since the sender logic treats any non-zero value as "still sending", a negative value causes the sender kthread to loop indefinitely. This leads to a use-after-free when the interface is removed while the zombie thread is still active. Fix this by using atomic_xchg() to ensure the counter only transitions from 1 to 0 once. [sven: added missing change in batadv_tp_send] This can cause the sender kernel thread to loop indefinitely, leading to a use-after-free vulnerability if the associated network interface is removed. This issue could result in system instability or a denial of service. Red Hat severity: not rated. Weakness: CWE-191. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
In the Linux kernel, the following vulnerability has been resolved: batman-adv: fix fragment reassembly length accounting batman-adv keeps a running payload length for queued fragments and uses it to validate a fragment chain before reassembly. That accounting currently allows the accumulated fragment length to be truncated during updates. As a result, malformed fragment chains can bypass the intended validation and drive reassembly with inconsistent length state, leading to a local denial of service. Fix the accounting by storing the accumulated length in a length-typed field and rejecting update overflows before the existing validation logic runs. The fix was verified against the original reproducer and against valid fragment reassembly paths. Red Hat severity: not rated. Weakness: CWE-130. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
In the Linux kernel, the following vulnerability has been resolved: batman-adv: v: stop OGMv2 on disabled interface When a batadv_hard_iface is disabled, its mesh_iface pointer is set to NULL. However, batadv_v_ogm_send_meshif() may still dispatch OGMs via batadv_v_ogm_queue_on_if() for interfaces that have since lost their mesh_iface association. This results in a NULL pointer dereference when batadv_v_ogm_queue_on_if() unconditionally calls netdev_priv() on the now NULL hard_iface->mesh_iface to retrieve the batadv_priv. It is necessary to ensure that the batadv_v_ogm_queue_on_if() checks that it is using the same mesh_iface for which batadv_v_ogm_send_meshif() was called. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
In the Linux kernel, the following vulnerability has been resolved: batman-adv: clear current gateway during teardown batadv_gw_node_free() removes the gateway list entries during mesh teardown, but it does not clear the currently selected gateway. This leaves stale gateway state behind across cleanup and can break a later mesh recreation. Clear bat_priv->gw.curr_gw before walking the gateway list so the selected gateway reference is dropped as part of teardown. A flaw was found in the Linux kernel's batman-adv module, which is responsible for managing mesh networks. When a mesh network is being shut down, the system fails to properly clear the active gateway information. This leaves outdated network configuration data, which can prevent the mesh network from being successfully re-established. The consequence is a disruption of network services, effectively a denial of service. Red Hat severity: not rated. Weakness: CWE-459. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: handle forward allocation error batadv_dat_forward_data() calls pskb_copy_for_clone() to duplicate an skb for each DHT candidate, but does not check the return value before passing it to batadv_send_skb_prepare_unicast_4addr(). That function dereferences the skb unconditionally, so a failed allocation triggers a NULL pointer dereference. Skip forwarding to the current DHT candidate on allocation failure. A flaw was found in the Linux kernel's batman-adv (Better Approach To Mobile Ad-hoc Networking) module. This vulnerability occurs because the `batadv_dat_forward_data()` function fails to validate the success of a memory allocation operation. An attacker could exploit this by triggering a scenario where the memory allocation fails, leading to a NULL pointer dereference and causing the system to crash. This results in a Denial of Service (DoS). Red Hat severity: not rated. Weakness: CWE-252. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
In the Linux kernel, the following vulnerability has been resolved: batman-adv: frag: disallow unicast fragment in fragment batadv_frag_skb_buffer() is called by batadv_batman_skb_recv() when a BATADV_UNICAST_FRAG packet is received. Once all fragments are collected and the packet is reassembled, batadv_recv_frag_packet() calls batadv_batman_skb_recv() again to process the defragmented payload. A malicious sender can craft a BATADV_UNICAST_FRAG packet whose reassembled payload is itself a BATADV_UNICAST_FRAG packet (matryoshka-style nesting). Each nesting level recurses through batadv_batman_skb_recv() without bound, growing the kernel stack until it is exhausted. Since refragmentation or fragments in fragments are not actually allowed, discard all packets which are still BATADV_UNICAST_FRAG packets after the defragmentation process. A remote attacker can exploit this vulnerability by sending specially crafted BATADV_UNICAST_FRAG packets, which are designed to contain other fragmented packets. This 'fragments in fragments' scenario causes the kernel to recursively process the packets without bound, leading to kernel stack exhaustion and ultimately a Denial of Service (DoS) for the affected system. Red Hat severity: not rated. Weakness: CWE-770.
In the Linux kernel, the following vulnerability has been resolved: batman-adv: tvlv: reject oversized TVLV packets batadv_tvlv_container_ogm_append() builds a TVLV packet section from the tvlv.container_list. The total size of this section is computed by batadv_tvlv_container_list_size(), which sums the sizes of all registered containers. The return type and accumulator in batadv_tvlv_container_list_size() were u16. If the accumulated size exceeds U16_MAX, the value wraps around, causing the subsequent allocation in batadv_tvlv_container_ogm_append() to be undersized. The memcpy-style copy that follows would then write beyond the end of the allocated buffer, corrupting kernel memory. Fix this by widening the return type of batadv_tvlv_container_list_size() to size_t. In batadv_tvlv_container_ogm_append(), check the computed length against U16_MAX before proceeding, and bail out as if the allocation had failed when the limit is exceeded. A flaw was found in the Linux kernel's batman-adv (Better Approach To Mobile Ad-hoc Networking - Advanced) module. An integer overflow vulnerability in the TVLV (Type-Length-Value) packet processing can lead to an undersized memory allocation. This allows a subsequent operation to write beyond the intended buffer, causing kernel memory corruption.
In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: avoid use of uninit sender vars batadv_tp_recv_ack() and batadv_tp_stop() are only valid for tp_vars in the BATADV_TP_SENDER role. When called with a BATADV_TP_RECEIVER role, it proceeds to read sender-only members that were never initialized, leading to undefined behavior. This can be triggered when a node that is currently acting as a receiver in an ongoing tp_meter session receives a malicious ACK packet. Guard against this by checking tp_vars->role immediately after the lookup and bailing out if it is not BATADV_TP_SENDER, before any of those members are accessed. A remote attacker could exploit this vulnerability by sending a specially crafted acknowledgment (ACK) packet to a node configured as a receiver in an ongoing `tp_meter` session. This could lead to the use of uninitialized sender variables, resulting in undefined behavior and potentially a denial of service. Red Hat severity: not rated. Weakness: CWE-824. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix FSCTL permission bypass by adding a permission check for FSCTL_SET_SPARSE FSCTL_SET_SPARSE in fsctl_set_sparse() modifies the file's sparse attribute and saves it through xattr without any permission checks. This exposes two issues: 1) A client on a read-only share can change the sparse attribute on files it opened, even though the share is read-only. Other FSCTL write operations already check test_tree_conn_flag(work->tcon, KSMBD_TREE_CONN_FLAG_WRITABLE), but FSCTL_SET_SPARSE does not. 2) Even on writable shares, clients without FILE_WRITE_DATA or FILE_WRITE_ATTRIBUTES access should not modify the sparse attribute. Similar handle-level checks exist in other functions but are missing here. Add both share-level writable check and per-handle access check. Use goto out on error to avoid leaking file references. This vulnerability allows a client to bypass intended permission restrictions by using the FSCTL_SET_SPARSE operation. This can lead to unauthorized changes to file properties. Red Hat severity: not rated. Weakness: CWE-266. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
In the Linux kernel, the following vulnerability has been resolved: drm/sun4i: backend: fix error pointer dereference The function drm_atomic_get_plane_state() can return an error pointer and is not checked for it. Add error pointer check. Detected by Smatch: drivers/gpu/drm/sun4i/sun4i_backend.c:496 sun4i_backend_atomic_check() error: 'plane_state' dereferencing possible ERR_PTR() An attacker could potentially trigger this unchecked dereference, leading to a system crash or instability (Denial of Service). Red Hat severity: not rated. Weakness: CWE-476. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
In the Linux kernel, the following vulnerability has been resolved: ASoC: sti: use managed regmap_field allocations The regmap_field objects allocated at player init are never freed and may leak resources if the driver is removed. Switch to devm_regmap_field_alloc() to automatically limit the lifetime of the allocations the lifetime of the device. This oversight can lead to a resource leak, potentially impacting system stability or performance over time. Red Hat severity: not rated. Weakness: CWE-772. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.