VulniPulse uses Google Ads measurement to understand visits from advertisements and campaign performance. It runs cookie-free until you choose — accepting enables cookies for more accurate attribution. Rejecting keeps it cookie-free and never limits the site.
See exactly what is measuredComplete feed
3724 advisories across 32 monitored vendors.
An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on MX with SPC3 and SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). When an affected device initiates a TCP connection to an attacker-controlled system that responds with a specific packet, this causes a PFE crash and restart, which affects all services until the system has automatically recovered. This issue can happen among others in the following scenarios: ALG, SSL proxy, UTM, RTLOG, AppQoE probing, AAMW, ICAP, URL filtering. This issue affects Junos OS on MX Series with SPC3, SRX5k Series with SPC3, SRX1600 Series, SRX2300 Series, SRX4000 Series, and vSRX Series: * all versions before 23.2R2-S4, * 23.4 versions before 23.4R2-S5, * 24.2 versions before 24.2R2. Affected products named by the advisory: MX; EX. Affected products named by the advisory: MX; EX.
An Out-of-bounds Write vulnerability in the http-gatekeeper (http-gk) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). If an SRX Series device is configured for remote-access VPN with pre-logon compliance check, a network-based attacker sending specifically formatted requests can trigger an out of bounds write leading to an http-gk process crash. This crash leads to unavailability of all services depending on the [ system services web-management ] configuration (like J-Web, remote access VPN and firewall authentication) until the process automatically restarts. This issue affects Junos OS on SRX Series: * 23.2 versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S4, * 25.2 versions before 25.2R2, * 25.4 versions before 25.4R1-S1, 25.4R2.
An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on QFX10000 Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS). On all QFX10000 platforms in an EVPN-VxLAN scenario, if an attacker sends IPv6 multicast traffic and these packets reach the non-IRB interface of a spine switch it floods the packet to other spines and all Ethernet Segment Identifier (ESI) leaf switches. This flooding causes the packet to be forwarded in a endless loop, which can lead to saturation of the involved links and in turn impact to legitimate traffic. This issue affects Junos OS on QFX10000 Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S4. This issue does not affect Junos version after 24.4 as the QFX10000 Series devices are not supported on newer versions anymore. Affected products named by the advisory: EX. Affected products named by the advisory: EX.
An Improper Validation of Specified Quantity in Input vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS). When a specific packet is received from device in the same broadcast domain, an affected system calculates the packet size incorrectly. This causes further packet processing to fail, which triggers an FPC major error, resulting in a FPC reset impacting traffic until the FPC has automatically recovered. Affected scenarios are: MAP-T, or non-IP traffic encapsulated in IP (e.g. MPLS over GRE). When this issue happens the following logs can be observed: fpc<#> CMError: /fpc/0/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_LI_INT_REG_UNROLL_TAIL_LENGTH_OVF (0x2205eb), scope: pfe, category: functional, severity: major, module: MQSS(0), type: LI: Unroll TAIL length overflow, oc_category: default fpc<#> Performing action reset-fru for error /fpc/0/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_LI_INT_REG_UNROLL_TAIL_LENGTH_OVF (0x2205eb) in module: MQSS(0) with scope: pfe category: functional level: major, oc_category: default This issue affects Junos OS on MX Series: * all versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S4, * 25.2 versions before 25.2R2. Affected products named by the advisory: MX.
An Improper Restriction of Communication Channel to Intended Endpoints vulnerability in Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to cause a limited information disclosure and availability impact to the device. Due to a wrong initialization, a process which should only be able to communicate internally within the device can be reached over the network via an open port. This leads to a device being inadvertently exposed and increased CPU cycles spent processing ingress packets. This issue affects Junos OS Evolved: * all versions before 23.2R2-S7-EVO, * 23.4 versions before 23.4R2-S8-EVO, * 24.2 versions before 24.2R2-S5-EVO, * 24.4 versions before 24.4R2-S4-EVO, * 25.2 versions before 25.2R2-S1-EVO, * 25.4 versions before 25.4R1-S2-EVO. Affected products named by the advisory: EX. Affected products named by the advisory: EX.
A Missing Authorization vulnerability in the CLI of Juniper Networks Junos OS on EX Series allows a local, authenticated attacker to cause a Denial-of-Service (DoS). On EX2300, EX4000, EX4100, EX4300-MP (Multigigabit) and EX4400 switches, an authenticated, local attacker with no specific permissions or class can execute a specific, privileged CLI 'request' command which will cause complete traffic impact until the system automatically recovers. This issue affects Junos OS on EX2300, EX4000, EX4100, EX4300-MP (Multigigabit) and EX4400: * 23.2R2 versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S3, * 25.2 versions before 25.2R2, * 25.4 versions before 25.4R1-S1. Affected products named by the advisory: EX. Affected products named by the advisory: EX.
An Improper Check for Unusual or Exceptional Conditions vulnerability in the routing protocol daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent, unauthenticated attacker sending a specific BGP update over an established BGP session to cause a Denial-of-Service (DoS). Upon receipt of a specifically malformed non-inet/inet6 unicast BGP update, an RPD crash and restart is triggered, which will cause a complete service outage until routing has reconverged. The rpd crash occurs before the update can be readvertised, so there is no downstream propagation. This issue affects: * Junos OS versions 25.2 before 25.2R2; * Junos OS Evolved versions 25.2 before 25.2R2-EVO. Affected products named by the advisory: EX.
An Unchecked Input for Loop Condition vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS).Micro-BFD session flaps generate respective up/down events which are queued by PFEMAN for processing. Especially in a Virtual-Chassis (VC) scenario with locality‑bias configured, processing takes a significant amount of time for each event. If these sessions keep flapping, new events are constantly added, and in turn PFEMAN never completes processing these events. This results in the PFEMAN watchdog timer expiring, which causes the FPC to crash and restart, representing a complete service outage. This issue only affects MX series FPCs up to and including MPC9. It does not affect MPC10/11, LC4800/9600 and MX304. This issue affects Junos OS on MX Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S3, * 25.2 versions before 25.2R2. Affected products named by the advisory: MX; EX. Affected products named by the advisory: MX; EX.
An Out-of-bounds Write vulnerability in the SNMP daemon (snmpd) of Juniper Networks Junos OS and Junos OS Evolved allows an authenticated network-based attacker sending specific valid SNMPv3 queries to trigger a memory leak. Over time, continuous receipt of these queries will result in snmpd process memory exhaustion, resulting in a process crash and restart, impacting the ability to monitor the system via SNMP. Memory usage can be monitored using the following command: user@device> show system processes extensive | match snmpd This issue affects: Junos OS: * all versions before 21.2R3-S8; * from 21.4 before 21.4R3-S7; * from 22.1 before 22.1R3-S6; * from 22.2 before 22.2R3-S4; * from 22.3 before 22.3R3-S3; * from 22.4 before 22.4R3-S2; * from 23.2 before 23.2R2; * from 23.4 before 23.4R2. Affected products named by the advisory: EX.
An Improper Check for Unusual or Exceptional Conditions vulnerability in the advanced forwarding toolkit (evo-aftmand) of Juniper Networks Junos OS Evolved on PTX Series allows an unauthenticated network-based attacker generating continuous routing updates, resulting in unilist ECMP routes, to crash the evo-aftmand process on the PFE, leading to a Denial-of-Service (DoS). The conditions required for successful exploitation are based on a sequence of events that are outside an attacker's direct control. Unified list (unilist) ECMP routes are a specific ECMP behavior where multiple equal-cost routes share a single logical next-hop list entry. The router treats them as one route with multiple next hops and load balances traffic across that unified list. Due to an issue processing unilist ECMP routing updates, internal state corruption may occur, especially in large-scale ECMP unilist deployments, leading to the evo-aftmand process crashing, resulting in an evo-aftmand-bx core. Manual intervention is required to recover by rebooting the system or restarting the FPC. This issue affects Junos OS Evolved on PTX : * from 24.4R2-EVO before 24.4R2-S3-EVO; * from 25.2 before 25.2R2-EVO. Affected products named by the advisory: EX. Affected products named by the advisory: EX.
A NULL Pointer Dereference vulnerability in the management daemon (mgd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, high-privileged attacker setting or deactivating a specific SSH configuration parameter to create a Denial of Service (DoS). A local high-privileged user configuring or deactivating a specific 'system services ssh' configuration parameter can exploit a null pointer dereference in one of the functions used by SSH. The function attempts to dereference a null pointer when accessing certain configuration data, resulting in an mgd process crash and restart. Continued execution of these configuration commands will create a sustained Denial of Service (DoS) condition. This issue affects: Junos OS: * from 22.3 before 22.3R3-S5; * from 22.4 before 22.4R3-S10; * from 23.2 before 23.2R2-S7; * from 23.4 before 23.4R2-S8. This issue does not affect Junos OS before 22.3R1. Junos OS Evolved: * from 22.3R1-EVO before 23.2R2-S7-EVO; * from 23.4 before 23.4R2-S8-EVO. Affected products named by the advisory: EX.
OpenFGA is an authorization/permission engine built for developers. Prior to 1.18.0, OpenFGA's OIDC authenticator skipped JWT audience validation when authn.method was set to oidc, authn.oidc.issuer was configured, and authn.oidc.audience was not set, allowing a token minted for an unrelated service by the same identity provider to authenticate to OpenFGA. This issue is fixed in 1.18.0. Prior to 1.18.0, when OpenFGA is configured to use OIDC authentication (authn.method=oidc, authn.oidc.issuer set) but authn.oidc.audience is left unset, the JWT audience claim on incoming bearer tokens is not validated. As a result, a validly-signed OIDC access token issued by the same identity provider for a completely different, unrelated application can be accepted by OpenFGA as a valid credential, allowing an attacker holding such a token to authenticate to OpenFGA and perform unauthorized authorization queries or writes. An attacker who can obtain such a token, for example one issued to a lower-privileged or unrelated application at the same IdP, could use it to authenticate to OpenFGA and perform authorization queries or writes they should not be permitted to make. This flaw only affects deployments that explicitly enable OpenFGA's OIDC authentication method and leave --authn-oidc-audience unset.
OpenFGA is an authorization/permission engine built for developers. Prior to 1.18.0, when MySQL is being used as the datastore and authorization decisions rely on case-sensitive user strings, the tuple, changelog, and authorization_model identifier columns can compare case-distinct values such as user:Alice and user:alice as equivalent, causing two distinct check requests to return the same response. This issue is fixed in 1.18.0. This can lead to improper policy enforcement, where two different authorization requests might receive the same, unintended response, potentially affecting access controls. Red Hat does not ship OpenFGA as a standalone product. The affected code is bundled inside Grafana's experimental "Zanzana" authorization engine (which vendors github.com/openfga/openfga as a Go dependency), and Grafana itself is embedded in Red Hat Ceph Storage's dashboard, Red Hat Advanced Cluster Management, Multicluster Global Hub, and RHEL's grafana package. Zanzana is disabled by default in upstream Grafana (feature toggle zanzana=false, experimental) and none of these embedding products expose it as a supported, user-configurable OpenFGA/MySQL-backed authorization server, which significantly limits real-world exposure even though the vulnerable dependency ships as part of the bundled code. Red Hat severity: Moderate — CVSS 5.4 (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:N).
A security flaw has been discovered in enquirer up to 2.4.1. Affected is the function Enquirer.set of the component Public Package API. The manipulation of the argument question.name results in improperly controlled modification of object prototype attributes. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report. A flaw was found in enquirer, a command-line prompt tool. A remote attacker could exploit a vulnerability in the `Enquirer.set` function by manipulating the `question.name` argument. This improper handling of object prototype attributes can lead to prototype pollution, allowing an attacker to modify the behavior of an application. This could result in unexpected application behavior or potentially lead to further attacks. This could lead to unexpected application behavior in Red Hat products that use `enquirer` to process untrusted input, as an attacker could modify object attributes. The public availability of an exploit increases the risk. Red Hat severity: Moderate — CVSS 4.3 (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N). Weakness: CWE-915. Affected Red Hat products: OpenShift Pipelines; Red Hat Hardened Images; Red Hat OpenShift AI (RHOAI); Red Hat OpenShift Container Platform 4.
Impact: In body-parser versions prior to 1.20.6 (1.x line) and 2.3.0 (2.x line), when the parser is configured with an invalid limit option value such as an unparseable string or NaN, bytes.parse returns null and the request body size check is silently skipped. Applications that rely on limit as their primary safeguard against oversized request bodies will accept arbitrarily large payloads, leading to excessive memory and CPU usage and denial of service. After the fix, invalid limit values throw a clear error at parser construction time instead of silently disabling enforcement, while null and undefined continue to fall back to the default limit of 100kb. Workarounds: Validate the limit value before passing it to body-parser. For example, parse the value at startup and reject any configuration where the result is null or a non-finite number. This can lead to a Denial of Service (DoS) condition, making the application unavailable to legitimate users. Red Hat severity: Moderate — CVSS 5.9 (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-770. Affected products named by the advisory: Confidential Compute Attestation; Cryostat 4; Gatekeeper 3; Migration Toolkit for Applications 8; and 30 more.
An integer overflow in the jbig2_arith_iaid_ctx_new() function of Artifex commit cc37d0 allows attackers to cause a Denial of Service (DoS) via a crafted input. A flaw was found in jbig2dec. This can lead to the affected system becoming unresponsive or crashing, disrupting its normal operation. Red Hat severity: Moderate — CVSS 6.5 (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H). Weakness: CWE-190. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.
A user authenticating to Kubernetes clusters via the Pinniped Supervisor could potentially gain elevated permissions in the clusters, only if all the following conditions were true: the Pinniped Supervisor server is running with an ActiveDirectoryIdentityProvider resource configured; the ActiveDirectoryIdentityProvider.spec.groupSearch.attributes.groupName is empty; the attacker gains the ability to edit some part of the distinguished name (DN) of group entries in the Active Directory (AD) server's database for groups to which they belong; the configured group search parameters cause the edited group to be included in the group search results for the user; and the attacker knows the password for an AD user who belongs to the edited AD group. Affected versions: Pinniped (go.pinniped.dev) v0.11.0 through v0.46.0 inclusive; fixed in v0.47.0.
CVE-2026-0288 PAN-OS: Buffer Overflow Vulnerabilities in User-ID Terminal Server Agent
Unauthenticated callers can supply a malicious H2 JDBC URL through the testConnection API, which executes arbitrary Java code on the server via H2's INIT parameter. Vulnerability in Apache Gravitino. This issue affects Apache Gravitino: before 1.2.1. Users are recommended to upgrade to version 1.2.1, which fixes the issue. This issue only happens when using H2, and H2 is mainly used for testing and local development. Also, Gravitino is typically deployed in the internal environment, so the severity is low.
Remote Code Execution via unsafe deserialization in model loaders. Red Hat rates this important (CVSS 7.5). Weakness: CWE-502. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9; Red Hat Hardened Images; Red Hat OpenShift distributed tracing 3.