VulniPulse uses Google Ads measurement to understand visits from advertisements and campaign performance. It runs cookie-free until you choose — accepting enables cookies for more accurate attribution. Rejecting keeps it cookie-free and never limits the site.
See exactly what is measuredComplete feed
4487 advisories across 32 monitored vendors.
In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix the ACK parser to extract the SACK table for parsing Fix modification of the received skbuff in rxrpc_input_soft_acks() and a potential incorrect access of the buffer in a fragmented UDP packet (the packet would probably have to be deliberately pre-generated as fragmented) when AF_RXRPC tries to extract the contents of the SACK table by copying out the contents of the SACK table into a buffer before attempting to parse AF_RXRPC assumes that it can just call skb_condense() and then validly access the SACK table from skb->data and that it will be a flat buffer - but skb_condense() can silently fail to do anything under some circumstances. Note that whilst rxrpc_input_soft_acks() should be able to parse extended ACKs, the rest of AF_RXRPC doesn't currently support that. Further, there's then no need to call skb_condense() in rxrpc_input_ack(), so don't. An attacker could potentially craft a fragmented UDP packet to trigger an incorrect buffer access within the kernel, which may lead to system instability or other undefined behavior. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-125. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.
In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: use kmap_local_page in netvsc_copy_to_send_buf netvsc_copy_to_send_buf() copies page buffer entries into the VMBus send buffer using phys_to_virt() on the entry PFN. Entries for the RNDIS header and the skb linear data come from kmalloc'd memory and are always in the kernel direct map, but entries for skb fragments reference page cache or user pages, which on 32-bit x86 with CONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a page phys_to_virt() returns an address outside the direct map and the subsequent memcpy() faults on the transmit softirq path, which is fatal. Map the pages with kmap_local_page() instead, handling two properties of the page buffer entries: - pb[i].pfn is a Hyper-V PFN at HV_HYP_PAGE_SIZE (4K) granularity, not a native PFN. Reconstruct the physical address first and derive the native page from it, so the mapping stays correct where PAGE_SIZE > HV_HYP_PAGE_SIZE (e.g. arm64 with 64K pages). - Since commit 41a6328b2c55 ("hv_netvsc: Preserve contiguous PFN grouping in the page buffer array"), an entry describes a full physically contiguous fragment and pb[i].len can exceed PAGE_SIZE, while kmap_local_page() maps a single page. Copy page by page, splitting at native page boundaries.
In the Linux kernel, the following vulnerability has been resolved: net/smc: fix sleep-inside-lock in __smc_setsockopt() causing local DoS A logic flaw in __smc_setsockopt() allows a local unprivileged user to cause a Denial of Service (DoS) by holding the socket lock indefinitely. The function __smc_setsockopt() calls copy_from_sockptr() while holding lock_sock(sk). By passing a userfaultfd-monitored memory page (or FUSE-backed memory on systems where unprivileged userfaultfd is disabled) as the optval, an attacker can halt execution during the copy operation, keeping the lock held. Combined with asynchronous tear-down operations like shutdown(), this exhausts the kernel wq (kworkers) and triggers the hung task watchdog. [ 240.123456] INFO: task kworker/u8:2 blocked for more than 120 seconds. [ 240.123489] Call Trace: [ 240.123501] smc_shutdown+... [ 240.123512] lock_sock_nested+... This patch moves the user-space copy outside the lock_sock() critical section to prevent the issue. By providing a specially crafted memory page, an attacker can cause the system to halt execution, leading to a Denial of Service (DoS) by exhausting kernel resources and triggering a hung task watchdog. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-821.
In the Linux kernel, the following vulnerability has been resolved: net: phy: don't try to setup PHY-driven SFP cages when using genphy We don't have support for PHY-driver SFP cages with the genphy code. On top of that, it was found by sashiko that running sfp_bus_add_upstream() for genphy deadlocks, as for genphy the PHY probing runs under RTNL, which isn't the case for non-genphy drivers. This problem was reproduced, and does lead to a deadlock on RTNL. Before the blamed commit, the phy_sfp_probe() call was made by individual PHY drivers, so there was no way to get to the SFP probing path when using genphy. Let's therefore only run phy_sfp_probe when not using genphy. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Affected Red Hat products: Red Hat Enterprise Linux 6. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE.
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix NULL dereference in get_queue_ids() When usr_queue_id_array is NULL and num_queues is non-zero, get_queue_ids() returns NULL. The callers check only IS_ERR() on the return value; since IS_ERR(NULL) == false the check passes, and suspend_queues() calls q_array_invalidate() which immediately dereferences NULL while iterating num_queues times. Userspace can trigger this via kfd_ioctl_set_debug_trap() by supplying num_queues > 0 with a zero queue_array_ptr, causing a kernel panic. A NULL usr_queue_id_array with num_queues == 0 is a legitimate no-op (q_array_invalidate never executes, and resume_queues already guards all queue_ids dereferences behind a NULL check). Return ERR_PTR(-EINVAL) only when num_queues is non-zero and the pointer is absent; both callers already propagate IS_ERR() returns correctly to userspace. (cherry picked from commit f165a82cdf503884bb1797771c61b2fcc72113d4) Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
In the Linux kernel, the following vulnerability has been resolved: sctp: fix uninit-value in __sctp_rcv_asconf_lookup() __sctp_rcv_asconf_lookup() in net/sctp/input.c only checks that the ASCONF chunk can hold the ADDIP header and a parameter header, then calls af->from_addr_param(), which reads the full address (16 bytes for IPv6) trusting the parameter's declared length. An unauthenticated peer can send a truncated trailing ASCONF chunk that declares an IPv6 address parameter but stops after the 4-byte parameter header; reached from the no-association lookup path, from_addr_param() then reads uninitialized bytes past the parameter. The sibling __sctp_rcv_init_lookup() bounds parameters with sctp_walk_params(); this path open-codes the fetch and omits the bound. Verify the whole address parameter lies within the chunk before from_addr_param() reads it, the same class of fix as commit 51e5ad549c43 ("net: sctp: fix KMSAN uninit-value in sctp_inq_pop"). A flaw was found in the Linux kernel's Stream Control Transmission Protocol (SCTP) implementation. An unauthenticated remote attacker can exploit this vulnerability by sending a specially crafted, truncated ASCONF (Address Configuration) chunk. This can cause the system to read up to 16 bytes of uninitialized memory, potentially leading to information disclosure or memory corruption.
In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix global performance monitor reference counting In the SET_GLOBAL ioctl, v3d_perfmon_find() bumps the reference count on the perfmon it returns, but v3d_perfmon_set_global_ioctl() and v3d_perfmon_delete() fail to release that reference on several paths: 1. v3d_perfmon_set_global_ioctl() leaks the reference on its error paths. 2. CLEAR_GLOBAL leaks both the find reference and the reference previously stashed in v3d->global_perfmon by the SET_GLOBAL ioctl that configured it. 3. Release each of these references explicitly. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
In the Linux kernel, the following vulnerability has been resolved: erofs: fix use-after-free on sbi->sync_decompress z_erofs_decompress_kickoff() can race with filesystem unmount, causing a use-after-free on sbi->sync_decompress. When I/O completes, z_erofs_endio() calls z_erofs_decompress_kickoff() to queue z_erofs_decompressqueue_work() asynchronously. Then, after all folios are unlocked, unmount workflow can proceed and sbi will be freed before accessing to sbi->sync_decompress. Thread (unmount) I/O completion kworker queue_work z_erofs_decompressqueue_work (all folios are unlocked) cleanup_mnt .. erofs_kill_sb erofs_sb_free kfree(sbi) access sbi->sync_decompress // UAF!! Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE.
In the Linux kernel, the following vulnerability has been resolved: devlink: Release nested relation on devlink free devlink relation state is normally released from devl_unregister(), which calls devlink_rel_put(). This misses devlink instances that get a nested relation before registration and then fail probe before devl_register() is reached. That flow can happen for SFs. The child devlink gets linked to its parent before registration, then a later probe error calls devlink_free() directly. Since the instance was never registered, devl_unregister() is not called and devlink->rel is leaked. Release any pending relation from devlink_free() as well. The registered path is unchanged because devl_unregister() already clears devlink->rel before devlink_free() runs. This issue occurs when a devlink instance acquires a nested relation but fails to register, leading to a resource leak. This can result in system instability or a denial of service (DoS) over time due to resource exhaustion. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.
Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri::XML::Document#root= validated only that the new root was a Nokogiri::XML::Node, allowing a DTD node to be set as the document root. The result is a heap use-after-free during garbage collection or finalization, leading to an invalid memory read or potentially a segfault. This vulnerability is fixed in 1.19.4. This vulnerability occurs due to insufficient validation when setting the document's root element, allowing a malicious document to trigger a memory error. This can lead to a heap use-after-free, potentially causing the application to crash and resulting in a Denial of Service (DoS). This could lead to application crashes and impact the availability of services that process untrusted XML or HTML content using Nokogiri. This is only triggered by a programming error. Red Hat ships Nokogiri as a dependency in several products including Red Hat 3scale API Management Platform, Red Hat Satellite, and Red Hat Enterprise Linux buildroot packages. All affected product versions ship Nokogiri prior to the 1.19.4 fix. This memory-safety issue affects only the CRuby implementation (libxml2). The JRuby implementation was not affected; the same input validation was added there for behavioral parity. Red Hat severity: Low — CVSS 3.7 (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L).
Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri’s CRuby native extension could leave a Ruby wrapper pointing to freed memory when replacing the value of an XML attribute. If Ruby code had already accessed an attribute child node, Nokogiri::XML::Attr#value= could free the underlying native child node while the wrapper remained reachable through the document node cache. A later use of the freed child node or a Ruby GC mark could dereference an invalid pointer, causing an invalid read and a possible segfault. This vulnerability is fixed in 1.19.4. The Nokogiri maintainers have evaluated this as low severity. Reaching it requires an unusual API-usage pattern that does not arise during normal use. The application must directly access an attribute's child node and then replace that same attribute's value via Attr#value= or #content=. Nokogiri 1.19.4 makes this pattern safe with no change to the public API. Red Hat severity: Low — CVSS 3.7 (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L). Weakness: CWE-825. Affected Red Hat products: Red Hat 3scale API Management Platform 2; Red Hat Satellite 6. Red Hat does not currently list a fixing RHSA for this CVE.
Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri contains a bug when calling certain methods on allocated-but-uninitialized native wrapper classes that inherit from Nokogiri::XML::Node. This caused a NULL pointer dereference that could crash the process. This vulnerability is fixed in 1.19.4. An attacker who can control the construction of Nokogiri node objects could exploit this to cause a Denial of Service. Red Hat severity: Low — CVSS 2.9 (CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L). Weakness: CWE-476. Affected Red Hat products: Red Hat 3scale API Management Platform 2; Red Hat Satellite 6. Red Hat does not currently list a fixing RHSA for this CVE.
"Remember me" cookie age is not verified on the server. This potentially allows an attacker to intercept a valid cookie and reuse it indefinitely, even after the configured expiration time has passed. This issue affects all Apache Shiro versions from 1.2.4 through 2.x, and 3.0.0-alpha-1, only when RememberMe functionality is enabled. Upgrade to version 3.0.0 or later, which fixes the issue. Red Hat severity: Low — CVSS 3 (CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:C/C:L/I:N/A:N). Weakness: CWE-294. Affected Red Hat products: Red Hat Fuse 7; Red Hat JBoss Enterprise Application Platform Expansion Pack. Red Hat does not currently list a fixing RHSA for this CVE.
GitLab has remediated an issue in GitLab EE affecting all versions from 18.6 before 18.11.6, 19.0 before 19.0.3, and 19.1 before 19.1.1 that under certain conditions could have allowed an authenticated user with limited permissions to access project information due to insufficient authorization checks.
GitLab has remediated an issue in GitLab CE/EE affecting all versions from 8.3 before 18.11.6, 19.0 before 19.0.3, and 19.1 before 19.1.1 that under certain conditions could have allowed an authenticated user with maintainer-role permissions to make requests to internal network resources through mirror synchronization due to improper URL validation.
GitLab has remediated an issue in GitLab EE affecting all versions from 17.9 before 18.11.6, 19.0 before 19.0.3, and 19.1 before 19.1.1 that under certain conditions could have allowed an authenticated user with custom role permissions to view, create, or delete protected environment configurations despite CI/CD visibility being disabled for the project.
A flaw was found in KubeVirt's downward metrics virtio-serial server. The server reads guest requests using textproto.Reader.ReadLine(), which buffers input indefinitely until a newline character is received, with no length limit or read deadline. Red Hat has rated this issue as having Low security impact. The vulnerable code runs in virt-handler, a node-level DaemonSet; however, in OpenShift Virtualization, cgroup memory limits ensure the OOM kill is contained to the virt-handler pod and does not affect the node kernel or kubelet. Running VM workloads (QEMU processes) survive independently and continue operating — only management operations (live migration, graceful shutdown, monitoring updates) are temporarily disrupted. An administrator can recover by deleting the offending VirtualMachineInstance, after which virt-handler resumes normal operation on its next restart. The attack surface is limited to VMIs that explicitly configure a downwardMetrics virtio-serial device, which is not part of the default VM configuration. The blast radius is confined to a single node. Red Hat severity: Low — CVSS 3.8 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:L). Weakness: CWE-770. Affected Red Hat products: Red Hat OpenShift Virtualization 4. Red Hat does not currently list a fixing RHSA for this CVE.
In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix DMA address corruption due to find_vma misuse fastrpc_get_args() uses find_vma() to look up the VMA for a user-provided pointer and compute a DMA address offset. When the address falls in a gap before the returned VMA, (ptr & PAGE_MASK) - vma->vm_start underflows, corrupting the DMA address sent to the DSP. Replace find_vma() with vma_lookup(), which returns NULL when the address is not contained within any VMA. The `fastrpc_get_args()` function incorrectly calculates a Direct Memory Access (DMA) address offset for user-provided pointers. This can lead to an underflow, corrupting the DMA address sent to the Digital Signal Processor (DSP). This corruption could result in system instability or other undefined behavior. Red Hat severity: not rated. Weakness: CWE-191. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix NULL-deref of opinfo->conn in oplock/lease break notifiers smb2_oplock_break_noti() and smb2_lease_break_noti() read opinfo->conn into a local with neither READ_ONCE() nor a NULL check. Both run from oplock_break() after opinfo_get_list() has dropped ci->m_lock, so a concurrent SMB2 LOGOFF (session_fd_check()) can set op->conn = NULL under ci->m_lock within that window. ksmbd_conn_r_count_inc(conn) then writes through NULL at offset 0xc4 -- a remotely triggerable oops. Guard both reads the way compare_guid_key() already does: read opinfo->conn with READ_ONCE() and return early if it is NULL, before allocating the work struct so nothing leaks. A NULL conn means the client is gone and the break is moot, so return 0; oplock_break() treats that as success and runs the normal teardown. This occurs because `opinfo->conn` is read without proper checks, allowing a concurrent Server Message Block (SMB2) LOGOFF to set `op->conn` to NULL. Successful exploitation leads to a kernel oops, resulting in a Denial of Service (DoS). Red Hat severity: not rated. Weakness: CWE-476. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size [Why & How] During HDCP 2.x repeater authentication over HDMI, the driver reads the sink's RxStatus register and extracts a 10-bit message size field (max value 1023). This value is used as the read length for the ReceiverID list without being clamped to the size of the destination buffer rx_id_list[177]. A malicious HDMI repeater could advertise a message size larger than the buffer, causing an out-of-bounds write during the I2C read. Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the rx_id_list buffer, matching the approach already used in the DP branch. (cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09) This could lead to an out-of-bounds write, potentially causing a denial of service or other unpredictable system behavior. Red Hat severity: not rated. Weakness: CWE-787. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.