Juniper Networks Routers Vulnerabilities & Security Advisories
6 advisories tracked · Juniper SIRT (JSA) via NVD · 0 listed in the CISA Known Exploited Vulnerabilities catalog
Every row below is a published Juniper Networks advisory that VulniPulse classified as Routers, with the CVEs, affected and fixed releases and exploitation status the vendor stated. Severity mix: 6 medium.
Android app · Google Play
Monitor Juniper CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 32 official vendor sources and 160+ reviewed platform categories.
Source
Juniper SIRT (JSA) via NVD
Juniper's advisory portal (kb.juniper.net) is a login-walled Salesforce app, so VulniPulse ingests Juniper SIRT (JSA) advisories from NVD, filtered to Juniper's own CNA (sirt@juniper.net) — official, machine-readable data with the affected Junos releases in each description. Junos on SRX/MX/EX/QFX and Junos Space are the common targets.
Latest Juniper Routers advisories
Medium [CVE-2026-57031] Junos OS: Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper…
An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on MX Series allows adjacent subscribers to bypass configured firewall filters. On MX Series devices with MPC10/11, LC4800/9600, and MX304 with subscribers configured on static interfaces, ingress firewall filters are not enforced, so that neither protocol level nor upstream bandwidth limitation are in effect. This issue affects Junos OS on MX with MPC10/11, LC4800/9600/4802, and MX304: * 23.2 versions from 23.2R2-S1 before 23.2R2-S7, * 23.4 versions from 23.4R2 before 23.4R2-S7, * 24.2 versions before 24.2R2-S3, * 24.4 versions before 24.4R2-S2, * 25.2 versions before 25.2R2. Affected products named by the advisory: MX. Affected products named by the advisory: MX.
Medium [CVE-2026-33800] Unchecked Input for Loop Condition vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS…
An Unchecked Input for Loop Condition vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS).Micro-BFD session flaps generate respective up/down events which are queued by PFEMAN for processing. Especially in a Virtual-Chassis (VC) scenario with locality‑bias configured, processing takes a significant amount of time for each event. If these sessions keep flapping, new events are constantly added, and in turn PFEMAN never completes processing these events. This results in the PFEMAN watchdog timer expiring, which causes the FPC to crash and restart, representing a complete service outage. This issue only affects MX series FPCs up to and including MPC9, and LC2101/2103 and LC480. It does not affect MPC10/11, LC4800/9600, and MX304. This issue affects Junos OS on MX Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S3, * 25.2 versions before 25.2R2. Affected products named by the advisory: MX.
Medium [CVE-2026-33774] Junos OS: Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper…
An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass the configured firewall filter and access the control-plane of the device. On MX platforms with MPC10, MPC11, LC4800 or LC9600 line cards, and MX304, firewall filters applied on a loopback interface lo0.n (where n is a non-0 number) don't get executed when lo0.n is in the global VRF / default routing-instance. An affected configuration would be: user@host# show configuration interfaces lo0 | display set set interfaces lo0 unit 1 family inet filter input where a firewall filter is applied to a non-0 loopback interface, but that loopback interface is not referred to in any routing-instance (RI) configuration, which implies that it's used in the default RI. The issue can be observed with the CLI command: user@device> show firewall counter filter not showing any matches. This issue affects Junos OS on MX Series: * all versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2, * 24.4 versions before 24.4R2. Affected products named by the advisory: MX. Affected products named by the advisory: MX.
Medium [CVE-2025-30650] Missing Authentication for Critical Function vulnerability in command processing of Juniper Networks Junos OS
A Missing Authentication for Critical Function vulnerability in command processing of Juniper Networks Junos OS allows a privileged local attacker to gain access to Linux-based line cards as root. This issue affects systems running Junos OS using Linux-based line cards. Affected line cards include: * MPC7, MPC8, MPC9, MPC10, MPC11 * LC2101, LC2103 * LC480, LC4800, LC9600 * MX304 (built-in FPC) * MX-SPC3 * SRX5K-SPC3 * EX9200-40XS * FPC3-PTX-U2, FPC3-PTX-U3 * FPC3-SFF-PTX * LC1101, LC1102, LC1104, LC1105 This issue affects Junos OS: * all versions before 22.4R3-S8, * from 23.2 before 23.2R2-S6, * from 23.4 before 23.4R2-S6, * from 24.2 before 24.2R2-S3, * from 24.4 before 24.4R2, * from 25.2 before 25.2R2. Affected products named by the advisory: MX. Affected products named by the advisory: MX.
Medium [CVE-2026-0203] Improper Handling of Exceptional Conditions vulnerability in packet processing of Juniper Networks Junos OS
An Improper Handling of Exceptional Conditions vulnerability in packet processing of Juniper Networks Junos OS allows an unauthenticated, network-adjacent attacker sending a specifically malformed ICMP packet to cause an FPC to crash and restart, resulting in a Denial of Service (DoS). When an ICMP packet is received with a specifically malformed IP header value, the FPC receiving the packet crashes and restarts. Due to the specific type of malformed packet, adjacent upstream routers would not forward the packet, limiting the attack surface to adjacent networks. This issue only affects ICMPv4. ICMPv6 is not vulnerable to this issue. This issue does not affect AFT-based line cards such as the MPC10, MPC11, LC4800, LC9600, and MX304. This issue affects Junos OS: - all versions before 21.2R3-S9, - from 21.4 before 21.4R3-S10, - from 22.3 before 22.3R3-S4, - from 23.2 before 23.2R2-S3, - from 23.4 before 23.4R2-S3, Affected products named by the advisory: MX; EX.
Medium [CVE-2025-60007] NULL Pointer Dereference vulnerability in the chassis daemon (chassisd) of Juniper Networks Junos OS on MX, SRX and EX Series
A NULL Pointer Dereference vulnerability in the chassis daemon (chassisd) of Juniper Networks Junos OS on MX, SRX and EX Series allows a local attacker with low privileges to cause a Denial-of-Service (DoS). When a user executes the 'show chassis' command with specifically crafted options, chassisd will crash and restart. Due to this all components but the Routing Engine (RE) in the chassis are reinitialized, which leads to a complete service outage, which the system automatically recovers from. This issue affects: Junos OS on MX, SRX and EX Series, except MX10000 Series and MX304: - all versions before 22.4R3-S8, - 23.2 versions before 23.2R2-S5, - 23.4 versions before 23.4R2-S6, Affected products named by the advisory: MX; EX.