Red Hat Linux Linux Kernel Vulnerabilities & Security Advisories
2113 advisories tracked · Red Hat Security Data API · 1 listed in the CISA Known Exploited Vulnerabilities catalog
Every row below is a published Red Hat Linux advisory that VulniPulse classified as Linux Kernel, with the CVEs, affected and fixed releases and exploitation status the vendor stated. Severity mix: 767 high, 1343 medium, 1 low.
Android app · Google Play
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 32 official vendor sources and 160+ reviewed platform categories.
Source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat Linux Kernel advisories
Medium [CVE-2026-72031] Add NOLPM quirk for PNY CS900 1TB SSD
In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Add NOLPM quirk for PNY CS900 1TB SSD The PNY CS900 1TB SSD (Phison PS3111-S11, DRAM-less) drops off the bus after entering Device-Initiated Slumber during idle. With the default med_power_with_dipm policy the link goes down (SStatus 1 SControl 300) and does not recover, forcing the filesystem read-only. Forcing max_performance keeps the link stable across prolonged idle. Add a NOLPM quirk so link power management is disabled for this drive specifically, leaving it intact for other devices on the host. This issue prevents the system from accessing the drive, forcing the filesystem into a read-only state, which results in a Denial of Service (DoS). Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-920. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-72128] fix refcount leak in nvmet_sq_create
In the Linux kernel, the following vulnerability has been resolved: nvmet: fix refcount leak in nvmet_sq_create() In nvmet_sq_create(), a reference on the ctrl is taken via kref_get_unless_zero() before calling nvmet_check_sqid(). If nvmet_check_sqid() fails, the function returns the error directly without releasing the reference, leading to a leak. Fix this by jumping to the "ctrl_put" label, which already performs the necessary nvmet_ctrl_put(ctrl). This ensures the reference is properly released on this error path. A flaw was found in the `nvmet` (NVMe over Fabrics target) component of the Linux kernel. This vulnerability occurs in the `nvmet_sq_create()` function, where a reference to a controller object is not properly released if a specific check fails. An attacker could potentially exploit this reference count leak to exhaust system resources, leading to a denial of service (DoS). Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-911. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-72100] fix a bug if the bio is out of limits
In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix a bug if the bio is out of limits If dm_integrity_check_limits fails, the code would exit with DM_MAPIO_KILL. However, the range would be already locked at this point, and it wouldn't be unlocked, resulting in a deadlock. Let's move the limit check up, so that when it exits, no resources are leaked. This issue occurs when the `dm_integrity_check_limits` function fails, leading to a resource remaining locked. A local attacker could potentially trigger this condition, resulting in a system deadlock and a Denial of Service (DoS). Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-833. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-72009] Extract PHY as shared domain for DSI/CSI
In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx93-blk-ctrl: Extract PHY as shared domain for DSI/CSI The MIPI DSI and CSI domains share control bits for clock and reset, which can lead to incorrect behavior if one domain disables the shared resource while the other is still active. To fix the issue, introduce a shared MIPI PHY power domain to own the common resources and make DSI and CSI its subdomains. This ensures the shared bits are properly managed and not disabled while still in use. This can result in a denial of service (DoS) or system instability. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-413. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-72117] fix data race on rx_stamp/rx_ifindex in bcm_rx_handler
In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler() For an rx op subscribed on all interfaces (ifindex == 0), the same op is registered once in the shared per-netns wildcard filter list, so bcm_rx_handler() can run concurrently on different CPUs for frames arriving on different net devices. op->rx_stamp and op->rx_ifindex were written before bcm_rx_update_lock was taken, allowing concurrent writers to race each other - including a torn store of the 64-bit rx_stamp on 32-bit platforms. Beyond a torn store bcm_send_to_user() must report the timestamp/ifindex of the very same frame whose content it is delivering. So the assignment is placed in the same unbroken bcm_rx_update_lock section as the content comparison. As a side effect, the RTR-request frame feature (which never reach bcm_send_to_user()) no longer updates rx_stamp/rx_ifindex, since only the notification path needs them. A flaw was found in the Linux kernel's CAN (Controller Area Network) Broadcast Manager (BCM) module. A data race condition exists in the `bcm_rx_handler()` function where the `rx_stamp` and `rx_ifindex` values are written without proper locking. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; and 2 more.
Medium [CVE-2026-72122] fix lockless bound/ifindex race and silent RX_SETUP failure
In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all mutate both fields under that same lock. Because the lockless reads and the locked writes are unordered with respect to each other, a racing bcm_notify() (device unregister) or bcm_connect() (concurrent bind on another thread sharing the socket) can make bcm_sendmsg() observe an inconsistent combination, e.g. a stale bound=1 together with the now-cleared ifindex=0, silently turning a socket bound to a specific CAN interface into one that also matches "any" interface. Keep the lockless bo->bound check purely as a fast-path reject, and move the ifindex read (and a bo->bound re-check) into the locked section, where every writer already serializes. This removes the possibility of observing the two fields torn against each other, rather than trying to fix it with more READ_ONCE()/WRITE_ONCE() pairs on two independently updated fields. Annotate the now-purely-lockless bo->bound accesses consistently across all its write sites. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; and 2 more.
Medium [CVE-2026-72034] reject detached mounts in capable_wrt_mount
In the Linux kernel, the following vulnerability has been resolved: fhandle: reject detached mounts in capable_wrt_mount() The recent fhandle RCU fix moved the mount namespace capability check into capable_wrt_mount(), so a non-NULL mnt_namespace survives the ns_capable() dereference. The helper still assumes the later READ_ONCE(mount->mnt_ns) must be non-NULL because may_decode_fh() checked is_mounted() first. That assumption is not stable. A detached mount from open_tree(..., OPEN_TREE_CLONE) can be dissolved on fput while open_by_handle_at() is between those checks, and umount_tree() can clear mount->mnt_ns. If the helper observes NULL, it dereferences mnt_ns->user_ns and panics. Return false when the RCU read observes a detached mount. This keeps the relaxed permission path conservative: a mount no longer attached to a namespace cannot authorize open_by_handle_at() access. A flaw was found in the Linux kernel's file handle (fhandle) mechanism. A local attacker could exploit a vulnerability in the capable_wrt_mount() function, which incorrectly handles detached mounts. By performing specific operations, an attacker could trigger a null pointer dereference, leading to a system panic and causing a Denial of Service (DoS) on the affected system. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-476.
Medium [CVE-2026-72004] fix memory leak in ieee80211_register_hw
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix memory leak in ieee80211_register_hw() If kmemdup() fails while copying supported band structures, the error path jumps to fail_rate. This skips rate_control_deinitialize() and leaks the initialized local->rate_ctrl. Fix this by adding a fail_band label that shares the rate-control cleanup path before falling through to the remaining teardown. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have a suitable mac80211 device/driver combination to test with, no runtime testing was able to be performed. This issue occurs when the system attempts to copy Wi-Fi band structures, and an error during this process causes a memory resource to not be properly released. This oversight leads to a memory leak within the kernel, which could potentially impact system stability or lead to a denial of service. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772.
Medium [CVE-2026-68463] use pm_runtime_resume_and_get in suspend
In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to simplify error handling. pm_runtime_resume_and_get() automatically drops the usage counter on failure, avoiding the need for a separate pm_runtime_put_noidle() call. If it fails, the device is unclocked and accessing hardware registers would cause a kernel panic, so return the error immediately. A flaw was found in the Linux kernel, specifically within the `mmc: sdhci-esdhc-imx` component responsible for managing multimedia card (MMC) host controllers. During system suspend operations, an error in power management could cause the system to attempt accessing hardware that is not properly initialized. This improper access would lead to a kernel panic, effectively causing the system to crash and resulting in a denial of service. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-911. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
Medium [CVE-2026-72114] validate frame length in bcm_rx_setup for RTR replies
In the Linux kernel, the following vulnerability has been resolved: can: bcm: validate frame length in bcm_rx_setup() for RTR replies bcm_tx_setup() validates cf->len against the CAN/CAN FD DLC limits before installing frames for TX_SETUP, but bcm_rx_setup() never did the same for the RTR-reply frame configured via RX_SETUP with RX_RTR_FRAME. A flaw was found in the Linux kernel's Controller Area Network (CAN) Broadcom (bcm) driver. This vulnerability arises from insufficient validation of frame lengths when processing Remote Transmission Request (RTR) replies. An attacker could exploit this by sending a specially crafted RTR reply, which may lead to a system crash or other unpredictable system behavior. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-130. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-72080] Fix use-after-free during unmount
In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Fix use-after-free during unmount During unmount or failure teardown all mon_data structures that contain monitoring event file private data are freed after which kernfs nodes are removed. However, the RDT_DELETED flag is never set for the statically allocated default resource group. A concurrent reader of an event file associated with the default resource group may, after dropping kernfs active protection, block on rdtgroup_mutex while unmount proceeds to free the file private data and destroy the kernfs node without waiting for the reader. When the mutex is released, the reader wakes up, observes that RDT_DELETED is not set for the default group, and dereferences the already-freed file private data. Do not allow a new resctrl mount if there are any waiters on default group of previous mount. During the unmount process, a timing issue can occur where a concurrent reader of an event file attempts to access memory that has already been released. This 'use-after-free' vulnerability allows a local attacker to dereference invalid memory. The most significant consequence is system instability, potentially leading to a denial of service (DoS) where the system becomes unresponsive. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825.
Medium [CVE-2026-72026] Fix fwnode leak on state setup failure
In the Linux kernel, the following vulnerability has been resolved: irqchip/irq-riscv-imsic-early: Fix fwnode leak on state setup failure imsic_early_acpi_init() allocates a firmware node before setting up the IMSIC state. If imsic_setup_state() fails, the function returns without freeing the allocated fwnode. Free the fwnode and clear the global pointer on this error path, matching the cleanup already done when imsic_early_probe() fails. [ tglx: Use a common cleanup path instead of copying code around ] A flaw was found in the Linux kernel's RISC-V Interrupt Controller (IMSIC) early initialization. The imsic_early_acpi_init() function allocates a firmware node but fails to free it if the IMSIC state setup encounters an error. This oversight leads to a memory leak, which could potentially result in resource exhaustion and system instability, leading to a Denial of Service (DoS). Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
Medium [CVE-2026-72035] Replace direct dequeue call with peek and qdisc_dequeue_peeked
In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_taprio: Replace direct dequeue call with peek and qdisc_dequeue_peeked When taprio's software path peeks a non-work-conserving child qdisc, the child stashes the peeked skb in its gso_skb; taprio_dequeue_from_txq() then takes the packet with a direct child ->dequeue() call, which ignores that stash, orphans the peeked skb and desyncs the child's qlen/backlog. With a qfq child this re-enters the child on an emptied list and dereferences NULL, panicking the kernel from softirq on ordinary egress. Take the packet through qdisc_dequeue_peeked(), as sch_red and sch_sfb now do. The helper returns the child's stashed skb first and is a no-op when there is none, so a work-conserving child is unaffected and the gated path now consumes the skb whose length was charged to the budget. A flaw was found in the Linux kernel's taprio (Time-Aware Priority Shaper) scheduler. When the taprio software path processes network packets from a non-work-conserving child queue discipline (qdisc), it can incorrectly handle the packet buffer, leading to a null pointer dereference. This issue can cause a kernel panic during ordinary network egress operations, resulting in a Denial of Service (DoS) for the system. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-476.
Medium [CVE-2026-72124] serialize TX state transitions under so->rx_lock
In the Linux kernel, the following vulnerability has been resolved: can: isotp: serialize TX state transitions under so->rx_lock The TX state machine (so->tx.state) is driven from three contexts: sendmsg() claiming and progressing a transfer, the RX path consuming Flow Control/echo frames, and two hrtimers timing out a stalled transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with hrtimer_cancel() calls made under so->rx_lock elsewhere left windows where a frame or timer callback could act on a state that had already moved on, corrupting an unrelated transfer. so->rx_lock now covers the full lifecycle of a TX claim: sendmsg() takes it to check so->tx.state is ISOTP_IDLE, switch it to ISOTP_SENDING, bump so->tx_gen and drain the previous transfer's timers - all as one critical section. isotp_rcv_fc()/isotp_rcv_cf() already run under this lock via isotp_rcv(), and isotp_rcv_echo() now takes it itself, so none of them can ever observe a transfer mid-claim. This also means a transfer can no longer be handed to sendmsg()'s cleanup paths (signal or send error) while another thread is concurrently claiming or finishing it, so those paths can cancel timers and reset the state unconditionally. isotp_release() claims the socket the same way, so a racing sendmsg() sees a consistent ISOTP_SHUTDOWN and skips arming its timer or sending.
Medium [CVE-2026-72005] avoid full teardown before work setup in probe
In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00: avoid full teardown before work setup in probe rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for all probe failures. However, drv_data allocation and workqueue allocation can fail before intf_work, autowakeup_work and sleep_work have been initialized. Do not enter the full remove path until the probe has reached the point where those work items are set up. Return directly for drv_data allocation failure, and use a small early cleanup path for workqueue allocation failure. This issue was found by our static analysis tool and then confirmed by manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The early probe exits should not call a common teardown path that assumes the later work setup has already completed. A QEMU PoC forced alloc_ordered_workqueue() to fail before the work initializers are reached. The resulting fail path entered rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack. During the device probing process, if memory or workqueue allocations fail prematurely, the system attempts a full device teardown. This teardown incorrectly assumes that certain work items have been initialized, leading to invalid operations.
Medium [CVE-2026-72050] Free BPID bitmap on setup failure
In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Free BPID bitmap on setup failure nix_setup_bpids() allocates bp->bpids with rvu_alloc_bitmap(), which uses a plain kcalloc(). If any of the following devm_kcalloc() allocations for the BPID mapping arrays fails, the function returns without freeing the bitmap. Free the BPID bitmap before returning from those error paths. During the setup of BPID (Back Pressure ID) mapping arrays, if memory allocation fails, the BPID bitmap is not properly freed. This can lead to a memory leak, potentially impacting system stability or performance. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-72010] rebind mm mempolicy to effective_mems, not mems_allowed
In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: rebind mm mempolicy to effective_mems, not mems_allowed Creating a child cpuset where cpuset.mems is never set leads to a div/0 when a VMA mempolicy with MPOL_F_RELATIVE_NODES rebinds in response to a CPU hotplug event. Reproduction steps: 1) Create a cgroup w/ cpuset controls (do not set cpuset.mems) 2) Move the task into the child cpuset 3) Create a VMA mempolicy for that task with MPOL_F_RELATIVE_NODES 4) unplug and hotplug a cpu echo 0 > /sys/devices/system/cpu/cpu1/online echo 1 > /sys/devices/system/cpu/cpu1/online 5) mempolicy rebind does a div/0 in mpol_relative_nodemask on the call to __nodes_fold() The cpuset code passes (cs->mems_allowed) which is not guaranteed to have nodes to the rebind routine. Use cs->effective_mems instead, which is guaranteed to have a non-empty nodemask once we reach that code path. [ david: add a comment, slightly rephrase description ] A local user can exploit this by configuring a child cpuset without explicitly setting its memory nodes. When a CPU hotplug event occurs, a division-by-zero error is triggered during memory policy rebind, leading to a system crash. This vulnerability results in a Denial of Service (DoS). Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-369.
Medium [CVE-2026-72067] Preserve per instance callback errors
In the Linux kernel, the following vulnerability has been resolved: cpu: hotplug: Preserve per instance callback errors cpuhp_invoke_callback() unwinds earlier callbacks for the same hotplug state when one instance fails. The rollback path currently reuses ret, so a successful rollback can hide the original error and make the failed transition look successful. Keep the rollback result separate from the original error. When the cpuhp_invoke_callback() function attempts to unwind previous operations after a failure, it can incorrectly reuse a return value. This issue allows a successful rollback to mask the original error, causing a failed CPU hotplug transition to appear as if it succeeded. This could lead to the system reporting an incorrect state for CPU hotplug operations. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-393. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-68461] device property: initialize the remaining fields of fwnode_handle in fwnode_init
In the Linux kernel, the following vulnerability has been resolved: device property: initialize the remaining fields of fwnode_handle in fwnode_init() If a firmware node is allocated on the stack (for instance: temporary software node whose life-time we control) or on the heap - but using a non-zeroing allocation function - and initialized using fwnode_init(), its secondary pointer will contain uninitialized memory which likely will be neither NULL nor IS_ERR() and so may end up being dereferenced (for example: in dev_to_swnode()). Set fwnode->secondary to NULL on initialization. While at it: initialize the remaining fields of struct fwnode_handle too just to be sure. [ Fix typo in commit message. - Danilo ] This can occur if a non-zeroing allocation function is used. If this uninitialized pointer is subsequently dereferenced, it could lead to system instability or a denial of service (DoS). Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-824. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-68465] fix esdhc_change_pinstate to allow default state restore
In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-esdhc-imx: fix esdhc_change_pinstate() to allow default state restore esdhc_change_pinstate() checks for pins_100mhz and pins_200mhz at the top of the function and returns -EINVAL if either is not defined. This prevents the default case from ever being reached, which means devices with a sleep pinctrl state but without high-speed pin states (100mhz/ 200mhz) can never restore their default pin configuration. Move the IS_ERR checks for pins_100mhz and pins_200mhz into their respective switch cases. The `esdhc_change_pinstate()` function contains an error in how it checks for high-speed pin states. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-841. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.