Red Hat Linux Security Advisories & CVEs
5821 advisories tracked · Red Hat Security Data API · direct feeds checked every minute; rate-limited backstops use a safe source cadence
Android app · Google Play
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 34 official vendor sources and 160+ reviewed platform categories.
Security advisories for your Red Hat release
Pick your distribution release to see every advisory issued for it and its severity mix. Fixes ship as errata — keep the system patched. This is the release's advisory history, not a per-package scan.
Official source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat advisories
Medium [CVE-2026-74706] Fix NULL pointer dereference in aux device release
In the Linux kernel, the following vulnerability has been resolved: bnge: Fix NULL pointer dereference in aux device release If allocation of auxr_dev fails during auxiliary device setup, the error path calls auxiliary_device_uninit(), which eventually invokes bnge_aux_dev_release(). The release callback unconditionally dereferences aux_priv->auxr_dev->pdev to retrieve the parent bnge_dev. Since auxr_dev has not yet been allocated on this failure path, the dereference results in a NULL pointer exception Retrieve the parent bnge_dev from the auxiliary device's parent instead of auxr_dev, and free auxr_dev only when it was successfully allocated. This allows the release callback to correctly clean up partially initialized auxiliary devices. During the setup of an auxiliary device, if the allocation of a specific resource (`auxr_dev`) fails, the subsequent release process attempts to access an unallocated memory region. This results in a NULL pointer dereference, which can lead to a system crash, causing a Denial of Service (DoS). Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-476. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Medium [CVE-2026-74645] error out for >10000 active_mem_bp
In the Linux kernel, the following vulnerability has been resolved: mm/damon/lru_sort: error out for >10000 active_mem_bp damos_quota_score() can trigger division by zero if the target value is zero. DAMON_LRU_SORT lets users set the target value for the hot memory scheme via active_mem_bp parameter. It avoids setting it as the target value if the parameter value is zero. However, it also sets the cold memory scheme with a target value that is calculated as '10000 - active_mem_bp + 2'. Fix by returning an error when the user tries to start DAMON with >10000 active_mem_bp parameter value. It makes no sense to set active_mem_bp with 10002. It also requires module parameters write permission to reproduce the issue. That said, the consequence is quite bad. One reliable way to reproduce the issue is like below: # cd /sys/module/damon_lru_sort/parameters # echo 1000 > wmarks_high # echo 995 > wmarks_mid # echo 0 > wmarks_low # echo 10002 > active_mem_bp # echo Y > enabled # dmesg -w [...] [ 597.421247] Oops: divide error: 0000 [#1] SMP NOPTI [ 597.428848] RIP: 0010:damos_quota_score+0x6f/0x480 This issue was discovered [1] by Sashiko. This manipulation causes the `damos_quota_score()` function to attempt division by zero, leading to a system crash and a Denial of Service (DoS). Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H).
Medium [CVE-2026-74722] fix memory leak in btrfs_do_encoded_write
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix memory leak in btrfs_do_encoded_write() Local fuzzing of 6.12.94 has found the following memory leak: Unreferenced object 0xffff888018050a80 (size 64): comm "syz.0.17", pid 10297, jiffies 4294953601 hex dump (first 32 bytes): 00 10 00 00 00 00 00 00 01 00 00 00 00 00 00 00................ Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat package: kernel.
Medium [CVE-2026-74604] Revert "thermal/drivers/hwmon: Cleanup coding style a bit"
In the Linux kernel, the following vulnerability has been resolved: Revert "thermal/drivers/hwmon: Cleanup coding style a bit" Revert commit 030a48b0f6ce ("thermal/drivers/hwmon: Cleanup coding style a bit") that introduced a use-after-free into the error path of thermal_add_hwmon_sysfs() by removing a valid check from it. This flaw could allow a local attacker to cause a denial of service or potentially escalate privileges. thermal_add_hwmon_sysfs() could free an existing shared hwmon object on an error path instead of freeing only a newly allocated object. This creates a use-after-free candidate because the object may still be reachable from thermal or hwmon state after the failed setup path returns. For the CVSS the PR:H because triggering normally requires local ability to influence thermal device registration or driver setup and this control may be available to a privileged service or user only. Impact is at least local denial of service via kernel crash, and in the worst case may allow confidentiality or integrity impact due to kernel memory corruption and should be reviewed manually. Red Hat severity: Moderate — CVSS 4.1 (CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.
Medium [CVE-2026-74619] don't warn when the mount is completed from another user namespace
In the Linux kernel, the following vulnerability has been resolved: ovl: don't warn when the mount is completed from another user namespace fsopen() records the caller's user namespace in fc->user_ns and hands back an ordinary file descriptor. Nothing ties the task that calls fsconfig(FSCONFIG_CMD_CREATE) to the task that created the context. The fd is inherited across fork() and exec() and it can be passed over a unix socket. Completing a context from another user namespace is allowed on purpose. vfs_cmd_create() authorizes the create with mount_capable(), which for FS_USERNS_MOUNT checks ns_capable(fc->user_ns, CAP_SYS_ADMIN), and that succeeds for a task holding CAP_SYS_ADMIN in an ancestor of fc->user_ns. So an unprivileged task can reach the WARN_ON() in ovl_fill_super(): create a user and a mount namespace in a child, call fsopen("overlay") there, send the fscontext fd to the parent and let the parent issue FSCONFIG_CMD_CREATE. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
Medium [CVE-2026-74655] fix TX DMA buffer flush
In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: fix TX DMA buffer flush When transmit flushing a qcom-geni UART during an ongoing TX DMA, the UART gets stuck infinitely repeating corrupted TX DMA frames. The DMA-mode uart_ops does not provide a flush_buffer callback, so an in-flight transfer can complete after serial core has reset the transmit kfifo, underflowing its length and resubmitting page-sized transfers indefinitely. Add one that stops the transfer and clears tx_remaining and tx_queued. The stop path was also broken: it unmapped the buffer while the serial engine could still read it, and never reset the TX DMA state machine. Cancel the main sequencer command first, then reset the state machine and wait for it before unmapping. Drop the early return so a pending mapping is also cleaned up when the main command is inactive. The bug can be triggered from userspace with a large write immediately followed by TCOFLUSH. A following tcdrain will hang forever. The bug was reproduced and this fix was validated on Arduino Uno Q (QRB2210) using /dev/ttyHS1. Specifically, a vulnerability exists in the `qcom-geni` Universal Asynchronous Receiver-Transmitter (UART) driver's transmit Direct Memory Access (DMA) buffer flush mechanism. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat package: kernel.
Medium [CVE-2026-74670] stop estimator after disabled calc phase
In the Linux kernel, the following vulnerability has been resolved: ipvs: stop estimator after disabled calc phase IPVS estimator kthread 0 starts with zeroed chain and tick limits until its initial calculation phase completes. If network namespace teardown clears ipvs->enable during that phase, ip_vs_est_calc_phase() can return without installing positive limits. The kthread can then continue into its main loop and drain est_temp_list with zero chain_max, tick_max and est_max_count values. Each enqueue consumes one available tick row, but est_count never reaches the zero est_max_count value. After all rows are consumed, the row lookup returns IPVS_EST_NTICKS and ip_vs_enqueue_estimator() writes past the ticks and tick_len arrays. That keeps temporary estimators from being drained after the limits failed to initialize. Estimator kthreads can now self-exit before teardown or reload stops kd->task. Keep an extra task reference after creation and release it with kthread_stop_put(), so kd->task remains valid until the stop paths consume that reference. A flaw was found in the Linux kernel's IP Virtual Server (IPVS) component. During the initial setup of the IPVS estimator, if the network namespace is removed, the estimator may continue operating with uninitialized limits.
Medium [CVE-2026-74653] clear stuck empty-FIFO RX-timeout on LPC32xx
In the Linux kernel, the following vulnerability has been resolved: serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT (0x0c) but LSR.DR is clear. A character timeout is only cleared by reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is set, so nothing ever clears the condition. The interrupt is level-triggered and re-fires immediately, so on a single-core ARM926 the resulting interrupt storm livelocks the CPU. It is reproducible when userspace repeatedly opens the front-panel port (ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping the soft-lockup detector in serial8250_handle_irq_locked(). LPC32xx has no dedicated 8250 glue driver, it's driven by the generic 8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up in of_platform_serial_setup() the same way fsl8250_handle_irq is installed. The handler follows dw8250_handle_irq(): on an RX timeout with an empty FIFO (LSR.DR and LSR.BI clear) it does one throwaway RHR read to clear the condition, then calls serial8250_handle_irq_locked().
Medium [CVE-2026-74678] fix skb leak in ax88179_tx_fixup
In the Linux kernel, the following vulnerability has been resolved: net: usb: ax88179_178a: fix skb leak in ax88179_tx_fixup() When the interface has NETIF_F_SG enabled and skb_linearize() fails in ax88179_tx_fixup(), the function returns NULL without freeing the skb. usbnet_start_xmit() treats a NULL return from tx_fixup() as a drop (info->flags does not set FLAG_MULTI_PACKET for this driver), jumping to the "drop" label where it does `if (skb) dev_kfree_skb_any(skb)`. Because tx_fixup() returned NULL, the local skb variable in usbnet_start_xmit() is NULL, so the original skb is never freed — a memory leak on every TX frame whose linearization fails (i.e. under memory pressure). Free the skb before returning, matching the error handling already used for the pskb_expand_head() failure path in the same function. When the network interface has scatter-gather (SG) enabled and a packet linearization operation fails, the system fails to free the associated memory buffer. This oversight leads to a memory leak, which could be exploited by an attacker to cause a denial of service by exhausting system resources. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.
Medium [CVE-2026-74704] drop WARN_ON(1) for malformed packets in ACK filter
In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_cake: drop WARN_ON(1) for malformed packets in ACK filter The sch_cake ACK filter parses packets to find the TCP header and filter duplicated ACKs if the flow is backlogged. The parsing code contains a WARN_ON(1) which can be triggered by a malformed IP header in certain cases. Depending on the system configuration, this leads either to either spamming dmesg with warnings, or a panic if panic_on_warn is set. The code already correctly skips the offending packet in the branch that triggers the warning, so the WARN_ON itself doesn't really serve any purpose. So just drop it altogether to avoid the inconvenient side effects. A remote attacker could send specially crafted malformed IP packets. This could lead to the system logging excessive warnings or, under specific configurations, cause a system crash, resulting in a Denial of Service (DoS). Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-617. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-74707] validate metadata when processing requests
In the Linux kernel, the following vulnerability has been resolved: xsk: validate metadata when processing requests The zero-copy path validates TX metadata while obtaining the descriptor context, then reads it again later when preparing the hardware request. User space can change the metadata between those operations and bypass the original validation. Validate the metadata in xsk_tx_metadata_request() and use the resulting flags snapshot for every feature check. Read request fields once so all zero-copy drivers process only values observed after successful validation. A flaw was found in the Linux kernel's xsk (AF_XDP sockets) component. This vulnerability allows a local user to bypass security validation by modifying transmission (TX) metadata after it has been initially checked but before it is used to prepare hardware requests. This could lead to unexpected system behavior or potentially impact data integrity. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-367. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-74590] Fix bpf_get_fsverity_digest dynptr assumptions
In the Linux kernel, the following vulnerability has been resolved: fsverity: Fix bpf_get_fsverity_digest() dynptr assumptions The BPF verifier and the dynptr abstraction ensure that the memory space referenced by a dynptr remains valid. They do not, however, provide any guarantee that the contents of the memory are stable. kfuncs are expected to remain memory-safe even if concurrent modifications occur. bpf_get_fsverity_digest() didn't follow that: it could crash if arg->digest_size was concurrently modified. Fix that by using the known-good value hash_alg->digest_size instead. Also widen 'dynptr_sz' and 'out_digest_sz' to u64 to match the return type of __bpf_dynptr_size(). It doesn't appear that it can actually be more than INT_MAX currently (since __bpf_dynptr_data_rw() excludes file-based pointers), but the correct type might as well be used. A local attacker could exploit a race condition in the `bpf_get_fsverity_digest()` function by concurrently modifying its `digest_size` argument. This could lead to a system crash, resulting in a denial of service. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-663. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-74728] handle NULL b_addr in xfs_buf_free
In the Linux kernel, the following vulnerability has been resolved: xfs: handle NULL b_addr in xfs_buf_free When xfs_buf_alloc_backing_mem() fails, xfs_buf_free() is called with bp->b_addr still NULL. The code falls through to the folio_put path which calls virt_to_folio(NULL), dereferencing an invalid address and causing a kernel crash. Call Trace: xfs_buf_free+0x25f/0x510 xfs_buf_alloc+0xc98/0x19b0 xfs_buf_find_insert+0x55/0x14d0 xfs_buf_get_map+0x122b/0x17c0 xfbtree_init_leaf_block+0x11c/0x4a0 xfbtree_init+0x1bb/0x460 xrep_rmap_setup_scan+0x100/0x1f0 xrep_rmapbt+0x41/0xc0 Fix this by skipping folio_put() when bp->b_addr is NULL. When the system attempts to allocate memory for an XFS buffer and that allocation fails, the `xfs_buf_free` function is called with a null buffer address. This vulnerability can result in a Denial of Service (DoS) for the affected system. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-476. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-74709] clear metadata pointer when no timestamp is requested
In the Linux kernel, the following vulnerability has been resolved: xsk: clear metadata pointer when no timestamp is requested User space can change metadata flags after request processing. Rereading them during completion can therefore make the kernel write a timestamp that was not requested when the packet was submitted. Completion handling can then use the pointer itself instead of rereading the flags. On the mlx5 multi-packet WQE path metadata is evaluated per batch: xsk_tx_metadata_request() runs only for the descriptor that starts a session, just like the checksum offload that is applied once through the shared WQE. Only that descriptor's pointer is reset, so completion handling can record a timestamp for the other descriptors of the session regardless of their own XDP_TXMD_FLAGS_TIMESTAMP bit. The write stays inside the metadata area; the single-WQE, other zero-copy, and generic paths reset the pointer per descriptor and are unaffected. A flaw was found in the Linux kernel's xsk (AF_XDP sockets) component. A local attacker, by manipulating metadata flags after request processing, could cause the kernel to write a timestamp into the metadata area even when not explicitly requested. This could lead to unintended data modification within the metadata. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-367.
Medium [CVE-2026-74647] Remove buffer from list prior to unmap operation
In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Remove buffer from list prior to unmap operation fastrpc_req_munmap_impl() is called to unmap any buffer. The buffer is getting removed from the list after it is unmapped from DSP. This can create potential race conditions if multiple threads invoke unmap concurrently, where one thread may remove the entry from the list while another thread's unmap operation is still ongoing. Fix this by removing the buffer entry from the list before calling the unmap operation. If the unmap fails, the entry is re-added to the list so that userspace can retry the unmap, or alternatively, the buffer will be cleaned up during device release when the DSP process is torn down and all DSP-side mappings are freed along with remaining buffers in the list. This race condition occurs when multiple threads concurrently attempt to unmap a buffer. If the buffer is removed from the internal list after its unmap operation has started, it can lead to an inconsistent state. A local attacker could potentially exploit this to cause a denial of service or trigger unpredictable system behavior. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-367.
Medium [CVE-2026-74665] fix skb length accounting after generic XDP frag adjustment
In the Linux kernel, the following vulnerability has been resolved: net: fix skb length accounting after generic XDP frag adjustment Generic XDP exposes non-linear skb fragments through an xdp_buff. If an XDP program adjusts the fragment area, bpf_prog_run_generic_xdp() copies xdp_frags_size back to skb->data_len but leaves skb->len containing the old fragment contribution. After a fragment shrink, this makes skb_headlen() larger than the actual linear area. In the reproduced UDP receive path, __skb_datagram_iter() copied 1024 bytes past the actual linear tail to userspace, starting at struct skb_shared_info. The copied bytes included the affected skb's nr_frags, xdp_frags_size and a kernel pointer from skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same amount and truncated at the end. Subtract the old data_len before replacing it and add the new data_len afterwards, keeping skb->len and skb->data_len synchronized. A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by 1024 bytes from its fragment area. Before the fix, all 10 runs produced corrupted payloads. After the fix, all 10 runs matched the expected payload exactly. Incorrect length accounting for `skb` (socket buffer) fragments after an eXpress Data Path (XDP) program adjusts the fragment area can lead to an out-of-bounds read.
Medium [CVE-2026-74634] Prevent subbuf order change when resizing is disabled
In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Prevent subbuf order change when resizing is disabled Because ring_buffer_subbuf_order_set() frees buffer pages, we can't allow it when resizing is disabled. A non-consuming reader is at risk of use-after-free (rb_advance_iter()). Return -EBUSY on resize_disabled, matching ring_buffer_resize() behaviour. This vulnerability occurs when the system attempts to change the order of sub-buffers while resizing is disabled, leading to memory being freed prematurely. A local attacker could exploit this use-after-free condition to potentially cause a system crash (denial of service) or gain elevated privileges. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
Medium [CVE-2026-74659] fix uninitialised bytes on the wire
In the Linux kernel, the following vulnerability has been resolved: net: bridge: mrp: fix uninitialised bytes on the wire br_mrp_alloc_test_skb() builds MRP test frames on an skb from dev_alloc_skb(), which does not clear the linear data area. On the MRA ring-role branch the sub-option TLV header is appended with sub_tlv = skb_put(skb, sizeof(*sub_tlv)); sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR; so sub_tlv->length is never written, and the two trailing alignment bytes are appended with a bare skb_put() that does not clear them either. The neighbouring oui and sub_opt regions are explicitly zeroed, so three uninitialised bytes are left in every MRA MRP_Test frame that goes out. Put the sub-option TLV header and the alignment padding in a single skb_put_zero(), which clears both. The AUTO_MGR sub-TLV carries no payload, so the zeroed length field is already the value it should have. A flaw was found in the Linux kernel's Multiple Registration Protocol (MRP) bridge module. When constructing MRP test frames, the br_mrp_alloc_test_skb() function fails to properly initialize certain fields. This oversight results in three uninitialized bytes being transmitted in every MRA MRP_Test frame, potentially leading to the disclosure of sensitive information. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-824.
Medium [CVE-2026-74601] Use current_context for safe per-CPU buffer swap
In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Use current_context for safe per-CPU buffer swap The ring_buffer_swap_cpu() function currently checks the per-CPU committing counter to determine if a buffer is actively being written to before performing the swap. However, there exists a race window where this check can be bypassed: ring_buffer_lock_reserve cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_a rb_reserve_next_event rb_start_commit // inc committing if (unlikely(READ_ONCE(cpu_buffer->buffer)!= buffer)) {...} __rb_reserve_next rb_move_tail rb_end_commit(cpu_buffer); // dec committing => 0 /* interrupt hits here, successfully swaps! */ local_inc(&cpu_buffer->committing); ring_buffer_unlock_commit cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_b rb_commit rb_end_commit RB_WARN_ON(cpu_buffer,!local_read(&cpu_buffer->committing)) // triggers warning The committing counter can temporarily drop to 0 during a single write operation (within rb_move_tail), creating a window where swap can succeed even though the write is still in progress. This leads to inconsistent buffer state and triggers the RB_WARN_ON in rb_commit(). Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
Medium [CVE-2026-74633] Fix NULL pointer dereference in module event cache removal
In the Linux kernel, the following vulnerability has been resolved: tracing: Fix NULL pointer dereference in module event cache removal A module-only event filter such as ":mod:foo" is cached with a NULL event_mod->match when foo has not been loaded. If a later write tries to remove a specific match from the same module, remove_cache_mod() passes the NULL cached match to strcmp(), causing a NULL pointer dereference. The issue can be reproduced from userspace: echo ':mod:trace_events_kunit_missing' > /sys/kernel/tracing/set_event echo '!foo_bar:mod:trace_events_kunit_missing' >> /sys/kernel/tracing/set_event The second write must be a concatenation (">>") to not include O_TRUNC as that would cause ftrace_clear_events() to clear the cached modules lines. The crash was reproduced on x86_64 QEMU while KUnit workers contended on the event tracing path: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode RIP: 0010:strcmp+0x10/0x30 Call Trace: __ftrace_set_clr_event_nolock+0x373/0x4a0 ftrace_set_clr_event+0xf0/0x180 ftrace_event_write+0xdf/0x110 vfs_write+0xf6/0x440 ksys_write+0x68/0xe0 do_syscall_64+0xf9/0x540 entry_SYSCALL_64_after_hwframe+0x77/0x7f Check event_mod->match before comparing it, consistent with the existing NULL checks for the cached system and event fields.