Red Hat Linux Security Advisories & CVEs
13569 advisories tracked · Red Hat Security Data API · direct feeds checked every minute; rate-limited backstops use a safe source cadence
Android app · Google Play
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 34 official vendor sources and 160+ reviewed platform categories.
Security advisories for your Red Hat release
Pick your distribution release to see every advisory issued for it and its severity mix. Fixes ship as errata — keep the system patched. This is the release's advisory history, not a per-package scan.
Official source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat advisories
Medium [CVE-2026-74294] Validate written enum values
In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: aiu: Validate written enum values The AIU HDMI and internal codec mux put callbacks use the written enum value with snd_soc_enum_item_to_val() before checking whether the value is valid for the enumeration. Reject out-of-range values before converting the enum item, matching the validation already done by the G12A HDMI and internal codec mux controls. A flaw was found in the Linux kernel's Advanced Linux Sound Architecture (ALSA) System on Chip (ASoC) meson audio interface unit (AIU) component. This allows an attacker to provide out-of-range enum values, which could lead to unexpected system behavior or a denial of service. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-1287. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-74296] Release the HW‑provided UAR index rather than the SW one
In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Release the HW‑provided UAR index rather than the SW one Free the UAR index returned by the hardware. This vulnerability occurs due to an incorrect User Access Register (UAR) index release, where the software-provided index is freed instead of the hardware-provided one. This improper resource management could potentially lead to resource exhaustion or system instability, impacting the availability of the system. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-763. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-74383] fix out-of-bounds access in nvme_setup_descriptor_pools
In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix out-of-bounds access in nvme_setup_descriptor_pools nvme_setup_descriptor_pools() indexes dev->descriptor_pools[] using the numa_node forwarded from hctx->numa_node by its single caller, nvme_init_hctx_common(). On a non-NUMA kernel hctx->numa_node is NUMA_NO_NODE (-1). Because the parameter was declared 'unsigned', the value becomes UINT_MAX and the index walks off the array (sized to nr_node_ids), faulting during nvme_alloc_ns() and leaving the namespace without a /dev node. Reproduces on any NVMe controller probed by a CONFIG_NUMA=n kernel: BUG: unable to handle page fault for address: ffff889101603d38 RIP: 0010:nvme_init_hctx_common+0x5a/0x190 [nvme] Call Trace: nvme_init_hctx+0x10/0x20 [nvme] nvme_alloc_ns+0x9e/0xa10 [nvme_core] nvme_scan_ns+0x301/0x3b0 [nvme_core] nvme_scan_ns_async+0x23/0x30 [nvme_core] Switch the parameter to int and fall back to node 0 when it is NUMA_NO_NODE; node 0 is always present. An out-of-bounds access can occur in the `nvme_setup_descriptor_pools()` function when handling Non-Uniform Memory Access (NUMA) node values on systems configured without NUMA support. This incorrect indexing can lead to a page fault, preventing the NVMe namespace from being properly initialized and resulting in a denial of service for the affected NVMe controller.
Medium [CVE-2026-74317] do not configure xps for XDP queues
In the Linux kernel, the following vulnerability has been resolved: ixgbe: do not configure xps for XDP queues netif_set_xps_queue() should not be called for an XDP Tx queue, since such queues are not netdev-exposed. On systems with number of CPUs >=64, on E610 adapter, netdev is configured with maximum number queue pairs being 63 (due to MSI-X assignment), but configuring XDP results in 64 XDP queues. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; and 1 more.
Medium [CVE-2026-74298] Fix FRMR set pinned push error path
In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix FRMR set pinned push error path Add destruction of FRMR handles in case the push to the pool fails. This prevents resources leak in case pool page allocation fails. This vulnerability occurs when the push to the pool fails, leading to a failure in the destruction of FRMR (Fast Registration Memory Region) handles. This can result in a resource leak, potentially impacting system stability or availability. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Medium [CVE-2026-74325] use kfree_rcu for offchannel link in mt76_put_vif_phy_link
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: use kfree_rcu for offchannel link in mt76_put_vif_phy_link mt76_put_vif_phy_link() frees the offchannel mlink with plain kfree() after rcu_assign_pointer(NULL). However, rcu_assign_pointer only prevents future RCU readers from obtaining the pointer -- it does not wait for existing readers that already hold it via rcu_dereference. The TX datapath (e.g. mt7996_mac_write_txwi) dereferences mlink->wcid and mlink->idx under rcu_read_lock. If a TX softirq obtained the pointer via rcu_dereference just before the NULL assignment, it will dereference freed memory after the kfree. struct mt76_vif_link already contains an rcu_head field that is unused at this free site -- a developer oversight, since the adjacent kfree_rcu_mightsleep call for rx_sc in the same function shows the pattern was understood. This vulnerability occurs because the mt76_put_vif_phy_link function improperly deallocates memory for offchannel links. An attacker could exploit this by causing the system to access memory after it has been freed, leading to a use-after-free condition. This could result in a system crash (denial of service) or potentially allow for arbitrary code execution. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825.
Medium [CVE-2026-74304] fix NULL pointer dereference in qca_setup for non-serdev device
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device hu->serdev is NULL for hci_uart attached via non-serdev paths, but qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev) and dereferences the result, causing a NULL pointer dereference. Fix by guarding the dereference with a NULL check, consistent with the rest of qca_setup(). A flaw was found in the Bluetooth subsystem of the Linux kernel, specifically within the `hci_qca` module. A local attacker could potentially exploit this to cause a system crash, resulting in a Denial of Service (DoS). Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-476. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Medium [CVE-2026-74335] Fix NULL pointer dereference in bpf_task_from_vpid
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL pointer dereference in bpf_task_from_vpid() bpf_task_from_vpid() looks up a task in the pid namespace of the current task, via find_task_by_vpid(): find_task_by_vpid(vpid) find_task_by_pid_ns(vpid, task_active_pid_ns(current)) find_pid_ns(nr, ns) -> idr_find(&ns->idr, nr) cgroup_skb programs run in softirq, which may interrupt a task that is itself in do_exit(). Once that task has passed exit_notify() -> release_task() -> __unhash_process(), its thread_pid is cleared, so task_active_pid_ns(current) returns NULL and find_pid_ns() dereferences &NULL->idr: BUG: kernel NULL pointer dereference, address: 0000000000000050 RIP: 0010:idr_find+0x11/0x30 lib/idr.c:176 Call Trace: find_pid_ns kernel/pid.c:370 [inline] find_task_by_pid_ns+0x3b/0xe0 kernel/pid.c:485 bpf_task_from_vpid+0x5b/0x200 kernel/bpf/helpers.c:2916 bpf_prog_run_array_cg+0x17e/0x530 kernel/bpf/cgroup.c:81 __cgroup_bpf_run_filter_skb+0x12b/0x250 kernel/bpf/cgroup.c:1612 sk_filter_trim_cap+0x1dc/0x4c0 net/core/filter.c:148 tcp_v4_rcv+0x18d1/0x2200 net/ipv4/tcp_ipv4.c:2223 do_exit+0xa63/0x1270 kernel/exit.c:1010 get_signal+0x141c/0x1530 kernel/signal.c:3037 Bail out when current has no pid namespace. A flaw was found in the Linux kernel's Berkeley Packet Filter (BPF) subsystem.
Medium [CVE-2026-74389] Fix log flood after cmd_mbox failure
In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix log flood after cmd_mbox failure hns_roce_cmd_mbox() is the command interface between driver and hardware. When hardware is abnormal, the unlimited error printings after hns_roce_cmd_mbox() failure will cause log flood and even system crash. Replace ibdev_err() and ibdev_warn() with their ratelimited versions in the error handling path after hns_roce_cmd_mbox() (and its wrappers hns_roce_create_hw_ctx/hns_roce_destroy_hw_ctx) fails. When the hardware experiences an abnormality, the `hns_roce_cmd_mbox()` command interface can fail. This failure leads to an uncontrolled flood of error messages, which can consume system resources and ultimately cause a system crash, resulting in a Denial of Service (DoS). Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-779. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
Medium [CVE-2026-74350] validate fast symlink target during inode read
In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate fast symlink target during inode read ocfs2_validate_inode_block() already rejects several inconsistent self-contained dinodes before they are exposed to the rest of the filesystem. Fast symlinks need the same treatment. A zero-cluster symlink is treated as a fast symlink and later read through page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses strnlen() on the inline payload and then copies len + 1 bytes into the folio. If a corrupt dinode stores an i_size that does not fit the inline area or omits the terminating NUL at i_size, that copy reads past the end of the inode block buffer. Reject zero-cluster symlink dinodes whose i_size exceeds the inline fast-symlink capacity or whose inline payload is not NUL-terminated exactly at i_size when the inode block is validated. This keeps malformed fast symlinks from reaching the read path.
Medium [CVE-2026-74408] fix OOB access from firmware tx status queue ID
In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: fix OOB access from firmware tx status queue ID ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a 4-bit hardware field (0-15), but the txq array only has ATH9K_NUM_TX_QUEUES (10) entries. Add a bounds check on ts.qid before using it as an array index. This vulnerability arises from an out-of-bounds memory access within the `ath_tx_edma_tasklet()` function. An internal queue identifier, which is a 4-bit hardware field, can exceed the bounds of the transmit queue array. This can lead to memory corruption, potentially allowing a local attacker to cause a denial of service or, in more severe cases, execute arbitrary code. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-787. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-74371] fix BPF_PROG_QUERY OOB write and cgroup backward compat
In the Linux kernel, the following vulnerability has been resolved: bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40 bytes, which was the layout before the addition of 'query.revision'), the kernel performs an out-of-bounds write. Fix this by propagating the user-provided attribute size 'uattr_size' down to the cgroup query handlers, and conditionally skipping writing the revision field to userspace when the provided buffer size is insufficient. query.revision in bpf_mprog_query is structurally identical to the cgroup case: a late tail field, written unconditionally. But the backward-compat hazard is not the same. The min-historical-size test is per command, and bpf_mprog_query only serves attach types that were born with revision in the struct: - tcx_prog_query -> BPF_TCX_INGRESS/EGRESS - netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER tcx, netkit, the revision field, and bpf_mprog_query itself all landed in the same v6.6 merge window (053c8e1f235d added the mprog query API + revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about revision. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat package: kernel.
Medium [CVE-2026-74331] Fix recursive lock in device_cache_fw_images
In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix recursive lock in device_cache_fw_images() A recursive locking deadlock can occur in the firmware loader's power management notification handler. During system suspend or hibernation preparation, fw_pm_notify() calls device_cache_fw_images(). This function acquires fw_lock to set the firmware cache state to FW_LOADER_START_CACHE and then iterates over all devices using dpm_for_each_dev() while still holding the lock. For each device, dev_cache_fw_image() schedules asynchronous work to cache the firmware. If memory allocation for the async work entry fails (e.g., in out-of-memory conditions), async_schedule_node_domain() falls back to executing the work function synchronously in the current thread. The synchronous execution path (__async_dev_cache_fw_image() -> cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire fw_lock again. Since the current thread already holds fw_lock, this results in a recursive locking deadlock. Fix this by releasing fw_lock immediately after updating the cache state and before calling dpm_for_each_dev(). The lock is only needed to protect the state update. Concurrent firmware requests will correctly see the FW_LOADER_START_CACHE state and use the piggyback mechanism, which is independently protected by its own fwc->name_lock.
Medium [CVE-2026-74431] Fix potential infinite loop in rxrpc_recvmsg
In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix potential infinite loop in rxrpc_recvmsg() Fix the wait in rxrpc_recvmsg() also take check the oob queue. A flaw was found in the Linux kernel's rxrpc network protocol implementation. This vulnerability could allow an attacker to trigger an infinite loop within the `rxrpc_recvmsg()` function by manipulating out-of-band (OOB) queue handling. This could lead to a Denial of Service (DoS) condition, making the system unresponsive. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-835. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
Medium [CVE-2026-74407] cancel SSR work items during PCI shutdown
In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cancel SSR work items during PCI shutdown A reboot can crash the kernel if it overlaps with WLAN firmware crash recovery (SSR). The crash is a NULL pointer dereference in the MHI teardown path while freeing DMA-backed MHI contexts. Simplified trace: dma_free_attrs mhi_deinit_dev_ctxt [mhi] ath11k_pci_power_down [ath11k_pci] ath11k_pci_shutdown [ath11k_pci] device_shutdown kernel_restart On the host side, SSR is driven by the MHI RDDM callback, which queues reset_work to perform device recovery. reset_work power-cycles the device by calling ath11k_hif_power_down() followed by ath11k_hif_power_up(). The power-down phase deinitializes MHI and frees DMA resources. Shutdown/reboot runs fully asynchronously with this RDDM-driven SSR recovery flow. As a result, the shutdown path (ath11k_pci_shutdown() -> ath11k_pci_power_down()) can race with the SSR recovery sequence. Fix this by canceling SSR-related work items during PCI shutdown, marking the device as unregistering, and serializing the RDDM callback path that checks and queues reset_work. This ensures that no new SSR recovery work can be queued once teardown has started, and that any in-flight recovery work is fully synchronized before device power-down, preventing MHI teardown and DMA resource freeing from running more than once.
Medium [CVE-2026-74366] fix NULL deref in change_sta_links for unready link
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL deref in change_sta_links for unready link _ieee80211_set_active_links() calls _ieee80211_link_use_channel() for each newly-added link and WARN_ON_ONCE()s if it fails. The call uses assign_on_failure=true, which allows mac80211 to continue despite driver failures, but when a mac80211-level channel validation fails (e.g., combinations check, DFS, or no available radio), drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create() is only called from that path, arvif->is_created remains false and arvif->ar remains NULL for the failed link. The subsequent drv_change_sta_links() call reaches ath12k_mac_op_change_sta_links(), which allocates an arsta and sets ahsta->links_map |= BIT(link_id) for the broken link before checking whether the link is ready. When the vdev was never created, only station_add() is skipped, but the link remains in links_map. Any subsequent operation iterating links_map and dereferencing arvif->ar without a NULL check will crash. Two observed examples are NULL deref in ath12k_mac_ml_station_remove() on disconnect and in ath12k_mac_op_set_key() when wpa_supplicant installs PTK keys. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9; Red Hat package: kernel-rt.
Medium [CVE-2026-74282] prevent snt_unacked underflow on CONN_ACK
In the Linux kernel, the following vulnerability has been resolved: tipc: prevent snt_unacked underflow on CONN_ACK tipc_sk_conn_proto_rcv() subtracts the peer-supplied connection ack count from the unsigned 16-bit send counter snt_unacked without checking that it does not exceed the number of messages actually outstanding: tsk->snt_unacked -= msg_conn_ack(hdr); msg_conn_ack() is read straight from a received CONN_MANAGER/CONN_ACK message. If the ack count is larger than snt_unacked, the subtraction wraps to a near-maximum value, leaving tsk_conn_cong() permanently true and starving the connection of further transmits. Validate the ACK count at the start of the CONN_ACK block and drop the message if it acknowledges more messages than are outstanding. A peer (or, for a local connection, the connected peer socket) can otherwise wedge a TIPC connection's send side by sending an oversized connection ack. A flaw was found in the Linux kernel's Transparent Inter-Process Communication (TIPC) component. A remote or local attacker could send an oversized connection acknowledgment (ACK) message, leading to an integer underflow. This underflow can cause the connection to become permanently congested, effectively starving it of further transmissions and resulting in a Denial of Service (DoS). Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H).
Medium [CVE-2026-74400] fix crash in bpf_[set|remove]_dentry_xattr for negative dentries
In the Linux kernel, the following vulnerability has been resolved: bpf: fix crash in bpf_[set|remove]_dentry_xattr for negative dentries bpf_set_dentry_xattr and bpf_remove_dentry_xattr BPF kfuncs attempt to lock the inode of the supplied dentry without checking if it is NULL. If a negative dentry is passed (e.g. from security_inode_create), d_inode(dentry) returns NULL, and inode_lock(inode) will cause a NULL pointer dereference. Trivially fix this by adding a NULL check for inode before attempting to lock it, returning -EINVAL if it is NULL. Additionally, drop WARN_ON(!inode) in bpf_xattr_read_permission() and bpf_xattr_write_permission(). These warnings could be triggered by passing a negative dentry to bpf_get_dentry_xattr() or the _locked variants of the xattr kfuncs, potentially causing a Denial of Service on systems with panic_on_warn enabled. Instead, simply return -EINVAL. This oversight can lead to a null pointer dereference. Additionally, warnings in `bpf_xattr_read_permission()` and `bpf_xattr_write_permission()` could be triggered by similar conditions. On systems configured with `panic_on_warn`, this vulnerability could result in a Denial of Service (DoS). Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-476. Affected Red Hat products: Red Hat Enterprise Linux 10.
Medium [CVE-2026-74295] Validate written enum value
In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: hdac_hdmi: Validate written enum value hdac_hdmi_set_pin_port_mux() uses the written enum value to index the texts array before calling snd_soc_dapm_put_enum_double(), which validates that the value is within the enum item range. An out-of-range value can therefore make the driver read past the texts array before the helper rejects the write. Move the lookup after the helper has accepted the value. A flaw was found in the Linux kernel, specifically within the ASoC hdac_hdmi audio codec driver. This vulnerability occurs because the driver does not properly validate an input value used to access an internal data structure. A local attacker could provide a specially crafted input, causing the driver to read beyond its intended memory boundaries. This out-of-bounds read could potentially expose sensitive information from the system's memory. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-125. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-74302] Fix UAF in hci_unregister_dev
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix UAF in hci_unregister_dev() hci_unregister_dev() does not disable cmd_timer and ncmd_timer before the hci_dev structure is freed. If a timeout fires during device teardown, the callback dereferences freed memory (including the hdev->reset function pointer), leading to a use-after-free. Add disable_delayed_work_sync() calls alongside the existing disable_work_sync() calls to ensure both timers are fully quiesced before teardown proceeds. During the unregistration of a Bluetooth device, the system fails to properly disable timers before freeing the associated memory. This can lead to a use-after-free vulnerability, where the system attempts to access memory that has already been released. Exploiting this flaw could result in system instability, crashes, or potentially allow an attacker to execute arbitrary code. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.