Red Hat Linux Security Advisories & CVEs
4667 advisories tracked · Red Hat Security Data API · direct feeds checked every minute; rate-limited backstops use a safe source cadence
Android app · Google Play
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 34 official vendor sources and 160+ reviewed platform categories.
Security advisories for your Red Hat release
Pick your distribution release to see every advisory issued for it and its severity mix. Fixes ship as errata — keep the system patched. This is the release's advisory history, not a per-package scan.
Official source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat advisories
High [CVE-2026-72443] Kill MIDI 2.0 URBs before freeing endpoints
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Kill MIDI 2.0 URBs before freeing endpoints MIDI 2.0 input URBs are started during snd_usb_midi_v2_create(). A later setup failure can still jump to snd_usb_midi_v2_free(), which currently frees each endpoint and its coherent URB buffers without first stopping the submitted URBs. A completion can then dereference the embedded URB context and endpoint state after they have been freed, or try to resubmit from the stale endpoint. This was observed as a KASAN slab-use-after-free in input_urb_complete(). The buggy scenario involves two paths, with each column showing the order within that path: probe error path: USB completion path: 1. start_input_streams() submits 1. 2. A later setup helper returns 2. input_urb_complete() runs an error. with urb->context in ep. Make the endpoint destructor follow the same teardown ordering used for disconnect when the endpoint has not already been disconnected: publish ep->disconnected, kill the URBs synchronously, and drain the endpoint before freeing URB buffers and endpoint storage. The guard avoids repeating the stop sequence after the normal snd_usb_midi_v2_disconnect_all() path, while still synchronizing the direct MIDI 2.0 create-error free path. A flaw was found in the Linux kernel's Advanced Linux Sound Architecture (ALSA) USB audio driver.
High [CVE-2026-72463] Fix dev use-after-free in xfrm async resumption
In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix dev use-after-free in xfrm async resumption xfrm async resumption hold skb->dev refcnt until after transport_finish. However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking device reference, such as vti_rcv_cb. The subsequent async resumption will decrement the tunnel device's reference count, which lead to uaf of tunnel dev and refcnt leak of orig dev as below: unregister_netdevice: waiting for vti1 to become free. Usage count = -2 Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set by xfrm_rcv_cb can race with device teardown. Extend rcu protection over xfrm_rcv_cb and transport_finish to prevent races. A flaw was found in the Linux kernel's xfrm (IP eXtensible FRamework for IPsec) subsystem. This vulnerability occurs during asynchronous resumption where the xfrm_rcv_cb function can modify a network device without properly managing its reference count. This improper handling leads to a use-after-free condition on the tunnel device and a reference count leak on the original device. An attacker could potentially exploit this to cause system instability or a denial of service (DoS). Red Hat severity: Important — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825.
High [CVE-2026-72399] check the number of BDs needed for xdp_frame
In the Linux kernel, the following vulnerability has been resolved: net: enetc: check the number of BDs needed for xdp_frame The size of xdp_redirect_arr array is ENETC_MAX_SKB_FRAGS. However, the number of fragments contained in xdp_frame may be greater than or equal to ENETC_MAX_SKB_FRAGS, which will cause the access to xdp_redirect_arr to be out of bounds. A flaw was found in the Linux kernel's enetc network driver. This vulnerability occurs in the eXpress Data Path (XDP) frame processing, where the driver fails to properly check the number of fragments in an XDP frame against the allocated buffer size. A remote attacker could exploit this out-of-bounds memory access by sending specially crafted network packets, potentially leading to a denial of service or arbitrary code execution. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-805. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
High [CVE-2026-72405] prevent double queueing in udp_tunnel_nic_device_sync
In the Linux kernel, the following vulnerability has been resolved: net: udp_tunnel: prevent double queueing in udp_tunnel_nic_device_sync Yue Sun reported a use-after-free and debugobjects warning in udp_tunnel_nic_device_sync_work() during concurrent device operations. The workqueue core clears the internal pending bit before invoking the worker. At that point, a concurrent thread can queue the work again. When the already running worker eventually clears the work_pending flag to 0, it mistakenly clears the flag for the newly queued instance. udp_tunnel_nic_unregister() then observes work_pending as 0 and frees the structure while the second work item is still active in the queue, leading to UAF. Fix this by returning early in udp_tunnel_nic_device_sync() if work_pending is already set, preventing redundant work queueing. A flaw was found in the Linux kernel's UDP tunnel networking component. A race condition in the `udp_tunnel_nic_device_sync` function allows a work item to be double-queued. This can lead to a use-after-free vulnerability, where memory is prematurely freed while still active. A local attacker could potentially exploit this to cause a denial of service or other undefined system behavior. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-366.
High [CVE-2026-72342] Fix HV VHCA stats agent registration race
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix HV VHCA stats agent registration race mlx5e_hv_vhca_stats_create() registers the stats agent through mlx5_hv_vhca_agent_create(). The helper publishes the agent in hv_vhca->agents[type] under agents_lock and immediately schedules an asynchronous control invalidation on the HV VHCA workqueue before returning to mlx5e. The asynchronous invalidation invokes the control agent's invalidate callback, which reads the hypervisor control block and forwards the command to mlx5e_hv_vhca_stats_control(). That callback may either: - call cancel_delayed_work_sync(&priv->stats_agent.work), or - call queue_delayed_work(priv->wq, &sagent->work, sagent->delay). Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; and 1 more.
High [CVE-2026-72449] fix list_del corruption in kfd_criu_resume_svm
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix list_del corruption in kfd_criu_resume_svm The cleanup tail of kfd_criu_resume_svm() walks svms->criu_svm_metadata_list and kfree()s each struct criu_svm_metadata without removing it from the list. The list head is left pointing at freed kmalloc-96 objects. A second AMDKFD_IOC_CRIU_OP from the same process re-enters: list_empty() reads the dangling ->next (use-after-free), the loop walks freed entries, and each is kfree()'d again (double-free). This is reachable by an unprivileged render-group user via /dev/kfd with no capabilities required. Add list_del() before the kfree() so the list is properly emptied. The list_for_each_entry_safe() iterator already caches the next pointer, so unlinking during the walk is safe. (cherry picked from commit 6322d278a298e2c1430b9d2697743d3a04b788b1) This leads to a use-after-free and double-free condition due to improper list handling during cleanup. Successful exploitation can result in memory corruption, potentially allowing for arbitrary code execution or a denial of service. Red Hat severity: Important — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-364. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.
High [CVE-2026-74256] bpf, sockmap: fix integer overflow in bpf_msg_pop_data bounds check
In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check start and len are u32, so u64 last = start + len; evaluates start + len in 32-bit and wraps before storing it in last. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; and 1 more.
High [CVE-2026-74305] Tighten cgroup storage cookie checks for prog arrays
In the Linux kernel, the following vulnerability has been resolved: bpf: Tighten cgroup storage cookie checks for prog arrays The fix in commit abad3d0bad72 ("bpf: Fix oob access in cgroup local storage") is still incomplete. The prog-array compatibility check treats a program with no cgroup storage as compatible with any stored storage cookie. This allows a storage-less program to bridge a tail call chain between an entry program and a storage-using callee even though cgroup local storage at runtime still follows the caller's context, that is, A -> B(no storage) -> C(storage) path. Requiring exact cookie equality would break the legitimate case of a storage-less leaf program being tail called from a storage-using one. Instead, only accept a zero storage cookie if the program cannot perform tail calls itself. This keeps A -> B(no storage) working while rejecting the A -> B(no storage) -> C(storage) bridge. A flaw was found in the Linux kernel's Berkeley Packet Filter (BPF) subsystem. This vulnerability allows a program without cgroup storage to bypass compatibility checks when bridging tail call chains. This could enable unintended interactions between programs with and without cgroup storage, potentially leading to a security bypass. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-358.
High [CVE-2026-74270] Require admin permission for DONE command
In the Linux kernel, the following vulnerability has been resolved: handshake: Require admin permission for DONE command ACCEPT and DONE are the two downcalls of the handshake genl family, both intended for use by the trusted handshake agent (tlshd). ACCEPT already requires GENL_ADMIN_PERM; DONE has no privilege check at all. The fd-lookup in handshake_nl_done_doit() only confirms that some pending handshake request exists for the supplied sockfd; it does not authenticate the sender. An unprivileged process that guesses or observes a valid sockfd can therefore submit a DONE with HANDSHAKE_A_DONE_STATUS == 0, leaving the kernel consumer to proceed as if the handshake succeeded. A non-zero status on a forged DONE tears down a legitimate in-flight handshake before tlshd can report its real result. An unprivileged local attacker can exploit a missing permission check in the 'DONE' command of the handshake general Netlink (genl) family. By guessing or observing a valid socket identifier, the attacker can either force the kernel to believe a handshake succeeded, potentially leading to unauthorized operations, or disrupt an ongoing legitimate handshake, causing a Denial of Service (DoS). Red Hat severity: Important — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-290. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9.
High [CVE-2026-72500] Free SRQ toggle page after firmware teardown
In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Free SRQ toggle page after firmware teardown Free the toggle page only after firmware teardown completes so that an NQ interrupt arriving during bnxt_qplib_destroy_srq() won't write the toggle values to an already-freed page. Move free_page() after bnxt_qplib_destroy_srq(). A flaw was found in the Linux kernel's Remote Direct Memory Access (RDMA) Broadcom NetXtreme-E (bnxt_re) driver. This use-after-free vulnerability occurs because a specific memory page is released prematurely during the teardown process. A local attacker could exploit this timing issue, potentially leading to memory corruption and a denial of service. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
High [CVE-2026-72502] clamp default adverting MSS to avoid GSO_BY_FRAGS (0xFFFF)
In the Linux kernel, the following vulnerability has been resolved: tcp: ipv6: clamp default adverting MSS to avoid GSO_BY_FRAGS (0xFFFF) When MTU is large, ip6_default_advmss() can return IPV6_MAXPLEN (65535). This is interpreted by TCP as mss_clamp, allowing the MSS to reach 65535. However, 0xFFFF is also used as a magic value GSO_BY_FRAGS in the kernel. If a TCP packet with gso_size=0xFFFF is passed to skb_segment(), it will be mistakenly treated as GSO_BY_FRAGS, leading to a NULL pointer dereference because local TCP packets do not use frag_list. Fix this by returning min(IPV6_MAXPLEN, GSO_BY_FRAGS - 1) (65534) from ip6_default_advmss() when MTU is large. Also update the stale comment in ip6_default_advmss() which suggested that IPV6_MAXPLEN is returned to mean "any MSS". When processing TCP IPv6 packets with a large Maximum Transmission Unit (MTU), a specific calculated Maximum Segment Size (MSS) value can conflict with an internal flag (GSO_BY_FRAGS). A local attacker could send a specially crafted TCP packet that, when processed, leads to a null pointer dereference. This vulnerability can result in a denial of service. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-476.
High [CVE-2026-72499] Free CQ toggle page after firmware teardown
In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Free CQ toggle page after firmware teardown Free the toggle page only after firmware teardown completes so that an NQ interrupt arriving during bnxt_qplib_destroy_cq() won't write the toggle value to an already-freed page. Move free_page() after bnxt_qplib_destroy_cq. An NQ interrupt arriving at this time can write data to this already-freed memory, leading to memory corruption. This could potentially result in a system crash or other unpredictable behavior. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
High [CVE-2026-74520] Fix IOPF group ownership UAF
In the Linux kernel, the following vulnerability has been resolved: iommu/iommufd: Fix IOPF group ownership UAF iopf_group_alloc() links each last-page IOPF group into the generic IOPF pending list before invoking the domain fault handler. iommufd_fault_iopf_handler() also queued an accepted group in the IOMMUFD deliver list without removing it from the generic pending list. When detach or HWPT replacement drops the device's IOPF reference count to zero, an IOMMU driver may call iopf_queue_remove_device(). That function responds to and frees groups through the generic pending list without removing the same groups from IOMMUFD's deliver list or response xarray. A later read, response, or cleanup can then access the freed group and cause a UAF. Make iopf_group_response() send a response regardless of pending-list membership, so the dequeued group can still be completed by IOMMUFD. A flaw was found in the Linux kernel's IOMMU (Input/Output Memory Management Unit) and IOMMUFD (IOMMU File Descriptor) components. This vulnerability is a Use-After-Free (UAF), which means the system attempts to use memory that has already been released. Specifically, during device detachment or hardware page table replacement, an IOMMU Page Fault (IOPF) group can be freed while still being referenced by other parts of the system.
High [CVE-2026-74557] Fix stale-data leak into the SCSI sense buffer
In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Fix stale-data leak into the SCSI sense buffer iscsi_scsi_cmd_rsp() copies the sense data of a SCSI Response from the target-supplied data segment. The segment carries a 2-byte sense length followed by the sense bytes, so it must hold 2 + senselen bytes, but the bounds check only requires datalen >= senselen: senselen = get_unaligned_be16(data); if (datalen sense_buffer, data + 2, min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE)); A target that returns a SCSI Response whose datalen equals senselen (with senselen data contents and end up in the command's sense buffer, which is returned to userspace. An incorrect bounds check in the `iscsi_scsi_cmd_rsp()` function allows a malicious iSCSI target to craft a SCSI Response. This can lead to a read beyond the intended buffer, causing stale connection data to be copied into the SCSI sense buffer and subsequently returned to userspace, potentially disclosing sensitive information. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-125. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6.
High [CVE-2026-74541] clear iso_data always when detaching conn from hcon
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: clear iso_data always when detaching conn from hcon When setting conn->hcon = NULL, also conn->hcon->iso_data = NULL is necessary, otherwise later iso_conn_free() will UAF. Fix clearing of iso_data in iso_sock_disconn() Fixes KASAN: slab-use-after-free in iso_conn_hold_unless_zero on iso_sock_release() followed by hci_abort_conn_sync(). This vulnerability arises from the system's failure to properly clear `iso_data` when a connection is detached from its host controller connection (`hcon`). A local attacker could exploit this use-after-free condition to cause a denial of service or potentially achieve arbitrary code execution. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
High [CVE-2026-74563] hold the RCU lock across ipv6_chk_addr in rds_tcp_laddr_check
In the Linux kernel, the following vulnerability has been resolved: rds: tcp: hold the RCU lock across ipv6_chk_addr() in rds_tcp_laddr_check() rds_tcp_laddr_check() looks up a scoped IPv6 interface with dev_get_by_index_rcu(), drops the RCU read-side lock, and only then passes the bare struct net_device * into ipv6_chk_addr(). dev_get_by_index_rcu() only keeps the device alive within the same RCU read-side section. After rcu_read_unlock(), a concurrent RTM_DELLINK can free the net_device; ipv6_chk_addr() then dereferences the stale pointer in __ipv6_chk_addr_and_flags() (e.g. l3mdev_master_dev_rcu(dev)), reading freed memory. Keep the RCU read-side lock held across the ipv6_chk_addr() call instead of dropping it right after the lookup, so the device cannot be freed while it is in use. Affected products named by the advisory: Red Hat Enterprise Linux 6; Red Hat package: kernel.
High [CVE-2026-74469] prevent peer transport count overflow
In the Linux kernel, the following vulnerability has been resolved: sctp: prevent peer transport count overflow sctp_assoc_add_peer() increments the association's 16-bit transport_count for every new unique peer. Adding the 65,536th transport wraps the count to zero. SCTP sock_diag uses transport_count to reserve the INET_DIAG_PEERS payload, then copies one sockaddr_storage for every entry in transport_addr_list. After the wrap, a diagnostic dump reserves an empty payload and writes 8 MiB of peer addresses past the skb tail. Perform the check after the existing-peer lookup so a duplicate address continues to return its existing transport at the limit. A flaw was found in the Stream Control Transmission Protocol (SCTP) implementation within the Linux kernel. An integer overflow occurs when the `transport_count` for an association exceeds its 16-bit limit, causing it to wrap around to zero. This allows a diagnostic dump to write 8 MiB of peer addresses beyond the intended memory buffer, leading to an out-of-bounds write. This memory corruption can result in a denial of service (DoS) due to system instability or crashes. Red Hat severity: Important — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-787.
High [CVE-2026-74480] stop fast-leave after deleting a port group
In the Linux kernel, the following vulnerability has been resolved: net: bridge: stop fast-leave after deleting a port group br_multicast_leave_group() iterates mp->ports with pp = &p->next in its fast-leave path. After br_multicast_del_pg() removes p, continuing the loop advances pp through the deleted entry. If multicast-to-unicast was enabled, the bridge can hold multiple port groups for the same port and group with different source MAC addresses. Once multicast-to-unicast is disabled, br_port_group_equal() matches those entries by port only. A fast leave can then delete one entry and continue from its stale next pointer, leaving mp->ports pointing at a deleted port group. Fast leave only needs to remove one matching port group. Break after br_multicast_del_pg() so the loop stops before dereferencing the removed entry. A flaw was found in the Linux kernel's network bridge module. When handling multicast fast-leave, a vulnerability exists where the system may attempt to access a port group after it has been deleted. This can occur if multicast-to-unicast was previously enabled and then disabled, leading to a stale pointer. This memory corruption vulnerability could lead to system instability or a denial of service.
High [CVE-2026-74535] avoid deadlocks in iso_sock_timeout
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: avoid deadlocks in iso_sock_timeout iso_sock_timeout() takes lock_sock, so sync disabling the timer while holding that lock may deadlock. iso_sock_timeout() may also run concurrently with iso_conn_del(), which leads to UAF [Task 1] [Task hdev->workqueue] iso_sock_timeout iso_conn_del iso_conn_hold_unless_zero iso_chan_del `------------> iso_conn_put caller frees hcon iso_conn_put iso_conn_free conn->hcon->iso_data = NULL; /* UAF */ Fix the deadlock by removing the disable from the lock_sock sections. Move the timer from iso_conn to iso_pinfo to decouple it from iso_conn which may need to be freed in lock_sock section. Convert some of the clear_timer to disable_timer. This vulnerability arises from a race condition where the `iso_sock_timeout()` function can execute concurrently with `iso_conn_del()`, leading to a Use-After-Free (UAF) condition. A UAF vulnerability allows an attacker to potentially execute arbitrary code or cause a denial of service by manipulating freed memory. Additionally, a deadlock can occur if `iso_sock_timeout()` attempts to disable a timer while holding a lock, further contributing to a denial of service. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-825.
High [CVE-2026-74569] widen NAT rewrite delta to s32 in sip_help_tcp
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp() sip_help_tcp() stores the size change of each NAT-rewritten SIP message in s16 diff and accumulates it in s16 tdiff, but a single message can grow by more than S16_MAX while the packet stays under the 65535 enlarge_skb() limit: nf_nat_sip() rewrites every matching URI, and a long Contact list expands the message by tens of kilobytes. diff then wraps, and "datalen = datalen + diff - msglen" yields a huge unsigned datalen, so the next iteration's ct_sip_get_header() reads past the linearized skb tail. Both are bounded by the 65535 byte packet limit, and the seqadj core is already s32 (nf_ct_seqadj_set() takes s32), so no previously accepted input is rejected. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; and 1 more.