VulniPulse uses Google Ads measurement to understand visits from advertisements and campaign performance. It runs cookie-free until you choose — accepting enables cookies for more accurate attribution. Rejecting keeps it cookie-free and never limits the site.
See exactly what is measuredComplete feed
No fix, workaround or mitigation extracted yet
In the Linux kernel, the following vulnerability has been resolved: net: airoha: Move ndesc initialization at end of airoha_qdma_init_rx_queue() If queue entry or DMA descriptor list allocation fails in airoha_qdma_init_rx_queue routine, airoha_qdma_cleanup() will trigger a NULL pointer dereference running netif_napi_del() for RX queue NAPIs since netif_napi_add() has never been executed to this particular RX NAPI. The issue is due to the early ndesc initialization in airoha_qdma_init_rx_queue() since airoha_qdma_cleanup() relies on ndesc value to check if the queue is properly initialized. Move page_pool allocation after descriptor list allocation in order to avoid memory leaks if desc allocation fails. A flaw was found in the Linux kernel's airoha network driver. An issue with early initialization of the ndesc variable in the airoha_qdma_init_rx_queue() routine can lead to a NULL pointer dereference during cleanup. This can result in a Denial of Service (DoS) condition. Additionally, improper ordering of page pool allocation could lead to memory leaks. Red Hat severity: not rated. Weakness: CWE-476. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
In the Linux kernel, the following vulnerability has been resolved: crypto: eip93 - fix hmac setkey algo selection eip93_hmac_setkey() allocates a temporary ahash transform for computing HMAC ipad/opad key material. The allocation uses the driver-specific cra_driver_name (e.g. "sha256-eip93") but passes CRYPTO_ALG_ASYNC as the mask, which excludes async algorithms. Since the EIP93 hash algorithms are the only ones registered under those driver names and they are inherently async, the lookup is self-contradictory and always fails with -ENOENT. When called from the AEAD setkey path, this failure leaves the SA record partially initialized with zeroed digest fields.
In the Linux kernel, the following vulnerability has been resolved: power: supply: max77705: Free allocated workqueue and fix removal order Use devm interface for allocating workqueue to fix two bugs at the same time: 1. Driver leaks the memory on remove(), because the workqueue is not destroyed. 2. Driver allocates workqueue and then registers interrupt handlers with devm interface. The interrupt handler schedules work on this exact workqueue, thus if interrupt is hit in this short time window - after destroying workqueue, but before devm() frees the interrupt - the schedulled work will lead to use of freed memory. Change is not equivalent in the workqueue itself: use non-legacy API which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is used to update power supply (power_supply_changed()) status, thus there is no point to run it for memory reclaim. Note that dev_name() is not directly used in second argument to prevent possible unlikely parsing any "%" character in device name as format. Incorrect management of workqueues and interrupt handlers during device removal can lead to a use-after-free vulnerability. This allows for the potential use of freed memory, which could result in system instability or, in certain scenarios, arbitrary code execution. Red Hat severity: not rated. Weakness: CWE-364.
In the Linux kernel, the following vulnerability has been resolved: net: enetc: fix NTMP DMA use-after-free issue The AI-generated review reported a potential DMA use-after-free issue [1]. If netc_xmit_ntmp_cmd() times out and returns an error, the pending command is not explicitly aborted, while ntmp_free_data_mem() unconditionally frees the DMA buffer. If the buffer has already been reallocated elsewhere, this may lead to silent memory corruption. Because the hardware eventually processes the pending command and perform a DMA write of the response to the physical address of the freed buffer. To resolve this issue, this patch does the following modifications: 1. Convert cbdr->ring_lock from a spinlock to a mutex The lock was originally a spinlock in case NTMP operations might be invoked from atomic context. After downstream support for all NTMP tables, no such usage has materialized. A mutex lock is now required because the driver now needs to reclaim used BDs and release associated DMA memory within the lock's context, while dma_free_coherent() might sleep. 2. Introduce software command BD (struct netc_swcbd) The hardware write-back overwrites the addr and len fields of the BD, so the driver cannot rely on the hardware BD to free the associated DMA memory. The driver now maintains a software shadow BD storing the DMA buffer pointer, DMA address, and size.
In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject zero bd_oblocknr in nilfs_ioctl_mark_blocks_dirty() nilfs_ioctl_mark_blocks_dirty() uses bd_oblocknr to detect dead blocks by comparing it with the current block number bd_blocknr. If they differ, the block is considered dead and skipped. However, bd_oblocknr should never be 0 since block 0 typically stores the primary superblock and is never a valid GC target block. A corrupted ioctl request with bd_oblocknr set to 0 causes the comparison to incorrectly match when the lookup returns -ENOENT and sets bd_blocknr to 0, bypassing the dead block check and calling nilfs_bmap_mark() on a non-existent block. This causes nilfs_btree_do_lookup() to return -ENOENT, triggering the WARN_ON(ret == -ENOENT). Fix this by rejecting ioctl requests with bd_oblocknr set to 0 at the beginning of each iteration. [ryusuke: slightly modified the commit message and comments for accuracy] A local attacker could exploit this vulnerability by sending a specially crafted input/output control (ioctl) request to the `nilfs_ioctl_mark_blocks_dirty()` function. By providing a zero block number, the attacker can bypass a critical dead block check, causing the system to attempt operations on a non-existent block. This ultimately leads to a system crash, resulting in a Denial of Service (DoS). Red Hat severity: not rated.
In the Linux kernel, the following vulnerability has been resolved: pinctrl: pinconf-generic: Fully validate 'pinmux' property The pinconf_generic_parse_dt_pinmux() assumes that the 'pinmux' property is not empty when present. This might be not true. With that, the allocator will give a special value in return and not NULL which lead to the crash when trying to access that (invalid) memory. Fix that by fully validating 'pinmux' value, including its length. An attacker could provide an empty 'pinmux' property, which would cause the system to crash due to invalid memory access. This could lead to a denial of service. Red Hat severity: not rated. Weakness: CWE-824. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
In the Linux kernel, the following vulnerability has been resolved: f2fs: protect extension_list reading with sb_lock in f2fs_sbi_show() In f2fs_sbi_show(), the extension_list, extension_count and hot_ext_count are read without holding sbi->sb_lock. If a concurrent sysfs store modifies the extension list via f2fs_update_extension_list(), the show path may read inconsistent count and array contents, potentially leading to out-of-bounds access or displaying stale data. Fix this by holding sb_lock around the entire extension list read and format operation. It occurs because the `extension_list` and related counts are read without proper synchronization, enabling a concurrent system file system (sysfs) store operation to modify the list while it is being accessed. This inconsistency can lead to system instability or incorrect information being presented. Red Hat severity: not rated. Weakness: CWE-366. Red Hat lists Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9 as not affected.
In the Linux kernel, the following vulnerability has been resolved: blk-wbt: remove WARN_ON_ONCE from wbt_init_enable_default() wbt_init_enable_default() uses WARN_ON_ONCE to check for failures from wbt_alloc() and wbt_init(). However, both are expected failure paths: - wbt_alloc() can return NULL under memory pressure (-ENOMEM) - wbt_init() can fail with -EBUSY if wbt is already registered syzbot triggers this by injecting memory allocation failures during MTD partition creation via ioctl(BLKPG), causing a spurious warning. wbt_init_enable_default() is a best-effort initialization called from blk_register_queue() with a void return type. Failure simply means the disk operates without writeback throttling, which is harmless. Replace WARN_ON_ONCE with plain if-checks, consistent with how wbt_set_lat() in the same file already handles these failures. Add a pr_warn() for the wbt_init() failure to retain diagnostic information without triggering a full stack trace. A flaw was found in the Linux kernel's block writeback throttling (blk-wbt) component. The `wbt_init_enable_default()` function used a warning mechanism (WARN_ON_ONCE) for expected failure paths during memory allocation or if writeback throttling was already registered. Red Hat severity: not rated. Weakness: CWE-544.
Denial of Service due to unbounded gzip decompression in Alpine APK parsing. Red Hat rates this important (CVSS 7.5). Weakness: CWE-770.
When a provide-xfr is given with a tls-auth-name, a secondary requesting a transfer should provide a client certificate with that name. However, no client certificate is needed when the request comes in over TLS over the regular tls-port (and not the tls-auth-port) or over over TCP over the regular port, when the other conditions of the provide-xfr rule match. A flaw was found in nsd. This authentication bypass allows an attacker to perform unauthorized zone transfers, leading to information disclosure. This flaw is rated as Moderate. This allows unauthorized zone transfers and information disclosure if requests are made over the regular TLS or TCP port, as the `tls-auth-xfr-only` option is not enabled by default. This vulnerability doesn't affect any supported Red Hat Product. Red Hat severity: Moderate — CVSS 7.5 (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). Weakness: CWE-303.
In the Linux kernel, the following vulnerability has been resolved: fuse: reject fuse_notify() pagecache ops on directories The operations FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE allow the FUSE daemon to actively write/read pagecache contents. For directories with FOPEN_CACHE_DIR, the pagecache is used as kernel-internal cache storage, and userspace is not supposed to have direct access to this cache - in particular, fuse_parse_cache() will hit WARN_ON() if the cache contains bogus data. Reject FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE on anything other than regular files with -EINVAL. A flaw was found in the Linux kernel's Filesystem in Userspace (FUSE) component. When these operations are performed on directories configured with `FOPEN_CACHE_DIR`, userspace can improperly access and manipulate kernel-internal cache storage. This could lead to system instability or a denial of service if the cache contains invalid data, potentially triggering a kernel warning. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-266. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.
In the Linux kernel, the following vulnerability has been resolved: tcp: restrict SO_ATTACH_FILTER to priv users This patch restricts the use of SO_ATTACH_FILTER (cBPF) on TCP sockets to users with CAP_NET_ADMIN capability. This blocks potential side-channel attack where an unprivileged application attaches a filter to leak TCP sequence/acknowledgment numbers. An unprivileged application can exploit this vulnerability by attaching a Berkeley Packet Filter (BPF) using the SO_ATTACH_FILTER option. This allows the application to conduct a side-channel attack, leading to the leakage of sensitive TCP sequence and acknowledgment numbers. This information disclosure could potentially be used to aid further attacks. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-266. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE.
In the Linux kernel, the following vulnerability has been resolved: ALSA: PCM: Fix wait queue list corruption in snd_pcm_drain() on linked streams snd_pcm_drain() uses init_waitqueue_entry which does not clear entry.prev/next, and add_wait_queue with a conditional remove_wait_queue that is skipped when to_check is no longer in the group after concurrent UNLINK. The orphaned wait entry remains on the unlinked substream sleep queue. On the next drain iteration, add_wait_queue adds the entry to a new queue while still linked on the old one, corrupting both lists. A subsequent wake_up dereferences NULL at the func pointer (mapped from the spinlock at offset 0 of the misinterpreted wait_queue_head_t), causing a kernel panic. Replace init_waitqueue_entry/add_wait_queue/conditional remove_wait_queue with init_wait_entry/prepare_to_wait/ finish_wait. init_wait_entry clears prev/next via INIT_LIST_HEAD on each iteration and sets autoremove_wake_function which auto-removes the entry on wake-up. finish_wait safely handles both the already-removed and still-queued cases. A flaw was found in the Advanced Linux Sound Architecture (ALSA) Pulse-Code Modulation (PCM) component of the Linux kernel. An attacker could exploit this issue to trigger a kernel panic, leading to a Denial of Service (DoS) on the affected system.
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind() rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock, but returns the selected listener after dropping that lock without taking a reference. rfcomm_connect_ind() then locks the listener, queues a child socket on it, and may notify it after unlocking it. The buggy scenario involves two paths, with each column showing the order within that path: rfcomm_connect_ind(): listener close: 1. Find parent in 1. close() enters rfcomm_get_sock_by_channel() rfcomm_sock_release(). 2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown() without pinning parent. closes the listener. 3. Call lock_sock(parent) and 3. rfcomm_sock_kill() bt_accept_enqueue(parent, unlinks and puts parent. sk, true). 4. Read parent flags and may 4. parent can be freed. call sk_state_change(). If close wins the race, parent can be freed before rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or the deferred-setup callback. After lock_sock() succeeds, recheck that it is still in BT_LISTEN before queueing a child, cache the deferred-setup bit while the parent is locked, and drop the reference after the last parent use.
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_exthdr: fix register tracking for F_PRESENT flag nft_exthdr_init() passes user-controlled priv->len to nft_parse_register_store(), which marks that many bytes in the register bitmap as initialized. However, when NFT_EXTHDR_F_PRESENT is set, the eval paths write only 1 byte (nft_reg_store8) or 4 bytes (*dest = 0 on TCP/DCCP error path). When len > 4, registers beyond the first are never written, retaining uninitialized stack data from nft_regs. Bail out if userspace requests too much data when F_PRESENT is set. This vulnerability occurs in the `nft_exthdr` module when handling user-controlled data lengths with a specific flag, `NFT_EXTHDR_F_PRESENT`, enabled. An attacker could exploit this by providing a crafted input, leading to the exposure of uninitialized stack memory. This information disclosure could potentially reveal sensitive system data. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-824. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Red Hat does not currently list a fixing RHSA for this CVE.
In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject oversized EMA RNR lists nl80211_parse_rnr_elems() stores the parsed element count in a u8-backed cfg80211_rnr_elems::cnt field and uses that count to size the flexible array allocation. Reject nested NL80211_ATTR_EMA_RNR_ELEMS input once the count reaches 255, before incrementing it again. This keeps the parser aligned with the data structure it fills and matches the existing bound check used by nl80211_parse_mbssid_elems(). The nl80211_parse_rnr_elems() function, responsible for parsing EMA RNR (Enhanced Multiple Access Reduced Neighbor Report) lists, does not properly handle an excessive number of nested NL80211_ATTR_EMA_RNR_ELEMS inputs. This improper input validation could allow a remote attacker to cause a denial of service (DoS) by providing an oversized EMA RNR list, potentially leading to system instability or a crash. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-770. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE.
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using the PF's log_max_current_uc/mc_list capabilities. When querying a VF vport with a larger configured max (via devlink), the firmware response can overflow this buffer: BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385 CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 print_report+0x176/0x4e4 kasan_report+0xc8/0x100 mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core] esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core] esw_vport_change_handler+0x6a/0x90 [mlx5_core] process_one_work+0x87f/0x15e0 worker_thread+0x62b/0x1020 kthread+0x375/0x490 ret_from_fork+0x4dc/0x810 ret_from_fork_asm+0x11/0x20 </TASK> Fix by querying the vport's own HCA caps to size the buffer correctly. Refactor the function to allocate and return the MAC list internally, removing the caller's dependency on knowing the correct max.
In the Linux kernel, the following vulnerability has been resolved: ipv6: sit: reload inner IPv6 header after GSO offloads ipip6_tunnel_xmit() caches the inner IPv6 header pointer at function entry and continues using it after iptunnel_handle_offloads(). For GSO skbs, iptunnel_handle_offloads() calls skb_header_unclone(). When the skb header is cloned, skb_header_unclone() can call pskb_expand_head(), which may move the skb head. The pskb_expand_head() contract requires pointers into the skb header to be reloaded after the call. If the later skb_realloc_headroom() branch is not taken, SIT uses the stale iph6 pointer to read the inner hop limit and DS field. That can read from a freed skb head after the old head's remaining clone is released. Reload iph6 after the offload helper succeeds and before subsequent reads from the inner IPv6 header. Keep the existing reload after skb_realloc_headroom(), since that branch can also replace the skb. A flaw was found in the Linux kernel's Simple Internet Transition (SIT) tunnel driver for IPv6. When processing network traffic with Generic Segmentation Offload (GSO) enabled, the driver may use a stale pointer to the inner IPv6 header after the socket buffer (skb) head has been reallocated. This can lead to reading from freed memory, potentially allowing an attacker to cause a denial of service or gain access to sensitive information.
In the Linux kernel, the following vulnerability has been resolved: ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options This patch restricts setting Loose Source and Record Route (LSRR) and Strict Source and Record Route (SSRR) IP options to users with CAP_NET_RAW capability. This prevents unprivileged applications from forcing packets to route through attacker-controlled nodes to leak TCP ISN and possibly other protocol information. While LSRR and SSRR are commonly filtered in many network environments, they may still be supported and forwarded along some network paths. RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing IPv4 Options) recommend to drop these options in 4.3 and 4.4. A flaw was found in the Linux kernel's IPv4 networking component. Red Hat severity: Moderate — CVSS 7 (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). Weakness: CWE-266. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE.
In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: Forcibly close timer instances at closing When snd_timer object is freed via snd_timer_free() and still pending snd_timer_instance objects are assigned to the timer object, it tries to unlink all instances and just set NULL to each ti->timer, then releases the resources immediately. The problem is, however, when there are slave timer instances that are associated with a master instance linked to this timer: namely, those slave instances still point to the freed timer object although the master instance is unlinked, which may lead to user-after-free. The bug can be easily triggered particularly when a new userspace-driven timers (CONFIG_SND_UTIMER) is involved, since it can create and delete the timer object via a simple file open/close, while the other applications may keep accessing to that timer. This patch is an attempt to paper over the problem above: now instead of just unlinking, call snd_timer_close[_locked]() forcibly for each pending timer instance, so that all assigned slave timer instances are properly detached, too. Since snd_timer_close() might be called later by the driver that created that instance, the check of SNDRV_TIMER_IFLG_DEAD is added at the beginning, too. A flaw was found in the Linux kernel's Advanced Linux Sound Architecture (ALSA) timer component.