Red Hat Linux Security Advisories & CVEs
5865 advisories tracked · Red Hat Security Data API · direct feeds checked every minute; rate-limited backstops use a safe source cadence
Android app · Google Play
Monitor Red Hat CVEs from your phone.
Choose a whole vendor or a precise platform, then receive matching security advisories by phone notification, email, or both. Coverage follows 34 official vendor sources and 160+ reviewed platform categories.
Security advisories for your Red Hat release
Pick your distribution release to see every advisory issued for it and its severity mix. Fixes ship as errata — keep the system patched. This is the release's advisory history, not a per-package scan.
Official source
Red Hat Security Data API
Red Hat Enterprise Linux errata (RHSA) via the official Red Hat Security Data API — CVE severity, CVSS and affected packages. A credential-free official source.
Latest Red Hat advisories
Medium [CVE-2026-68152] fix use-after-free in AMT delayed works
In the Linux kernel, the following vulnerability has been resolved: amt: fix use-after-free in AMT delayed works When an AMT device is removed, pending delayed works can still access the freed amt_dev structure, which may result in kernel crashes or memory corruption. amt_dev_stop() cancels req_wq and discovery_wq with cancel_delayed_work_sync(), but these works can be scheduled again from event_wq after the cancellation. The following is a simple race scenario: CPU0 CPU1 amt_dev_stop() cancel_delayed_work_sync() amt_event_work() mod_delayed_work(req_wq) free netdev req_wq accesses freed amt_dev Use disable_delayed_work_sync() in amt_dev_stop() to prevent req_wq and discovery_wq from being queued again and wait for running work items to complete. The delayed works are disabled after initialization in amt_newlink() and enabled only when the device is successfully opened. This keeps the delayed work lifecycle synchronized with the lifetime of the AMT device. A flaw was found in the Linux kernel's AMT (Accelerated Mobile Page) device driver. A use-after-free vulnerability can occur due to a race condition during device removal. An attacker could exploit this to impact system stability or integrity. This issue affects Intel AMT (Active Management Technology) devices. Systems without AMT hardware are not affected.
Medium [CVE-2026-68150] fix emergency thaw double-unlock of s_umount
In the Linux kernel, the following vulnerability has been resolved: fs/super: fix emergency thaw double-unlock of s_umount do_thaw_all() iterates over all superblocks via __iterate_supers() with SUPER_ITER_EXCL, which acquires s_umount exclusively before calling the callback and releases it afterwards. However, the callback do_thaw_all_callback() calls thaw_super_locked() which unconditionally releases s_umount on every code path.
Medium [CVE-2026-68146] Add global mutex to serialize trace_parser access
In the Linux kernel, the following vulnerability has been resolved: ftrace: Add global mutex to serialize trace_parser access In ftrace, the trace_parser structure is allocated and initialized when a trace file is opened, and is subsequently used across write and release handlers to parse user input. The affected handler paths and their specific functions are: - Open paths: ftrace_regex_open(), ftrace_graph_open() - Write paths: ftrace_regex_write(), ftrace_graph_write() - Release paths: ftrace_regex_release(), ftrace_graph_release() If userspace opens a trace file descriptor and shares it across multiple threads, concurrent write calls will race on the parser's internal state, specifically the 'idx', 'cont', and 'buffer' fields, leading to corrupted input or undefined behavior. Fix this by adding a global mutex, parser_lock, to serialize all access to trace_parser across write and release paths, preventing concurrent corruption of parser state. A flaw was found in the Linux kernel's ftrace tracing subsystem. This can result in corrupted input or undefined behavior within the kernel, potentially impacting system stability. This issue affects ftrace when a trace fd is shared across threads. Concurrent writes race on the per-fd trace_parser without serialization. Systems not using shared trace fds are not affected.
Medium [CVE-2026-68141] fix NULL deref in afiucv_hs_callback_syn
In the Linux kernel, the following vulnerability has been resolved: net/af_iucv: fix NULL deref in afiucv_hs_callback_syn() afiucv_hs_callback_syn() allocates the child socket with GFP_ATOMIC. If the allocation fails, nsk is NULL. When nsk is NULL, calling iucv_sock_kill(nsk) results in a NULL pointer dereference. Only call iucv_sock_kill() when a child socket was successfully allocated. An attacker could potentially trigger this condition, causing a NULL pointer dereference and resulting in a system crash, leading to a Denial of Service (DoS). Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-476. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat OpenShift Container Platform 4. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-68137] fix use-after-free in x25_kill_by_neigh
In the Linux kernel, the following vulnerability has been resolved: net/x25: fix use-after-free in x25_kill_by_neigh() x25_kill_by_neigh() walks the global X.25 socket list looking for sockets attached to a terminating neighbour. x25_list_lock protects list membership while the lookup is in progress, but it does not pin a socket's lifetime after the lock is dropped. The function currently drops x25_list_lock before calling lock_sock(s). A concurrent close can run x25_release(), remove the same socket from x25_list, and drop the last socket reference in that window. The neighbour teardown path can then lock or inspect a freed struct sock/struct x25_sock. Take sock_hold(s) while x25_list_lock still proves that the list entry is live, then drop the temporary reference after the socket has been locked, rechecked, and released. Recheck x25_sk(s)->neighbour after lock_sock(), because another path may have disconnected the socket before this path acquired the socket lock. Restart the list walk after each disconnect because the list lock was dropped and the previous iterator state may no longer be valid. A QEMU/KASAN run against origin/master reproduced a slab-use-after-free in x25_kill_by_neigh(). A flaw was found in the Linux kernel's X.25 networking component.
Medium [CVE-2026-68135] fix RX buffer leak on build_skb failure
In the Linux kernel, the following vulnerability has been resolved: net: hip04: fix RX buffer leak on build_skb failure When build_skb() fails in hip04_rx_poll(), the driver jumps to the refill path without releasing the current RX buffer and its DMA mapping. Installing a replacement buffer then overwrites the slot references and leaks both resources. Keep the current slot intact and return budget so NAPI retries the same buffer. Also free a newly allocated RX fragment when dma_map_single() fails. This issue was found by an in-house static analysis tool. This vulnerability occurs when the build_skb() function fails during the hip04_rx_poll() operation. The driver incorrectly proceeds without releasing the network receive (RX) buffer and its associated Direct Memory Access (DMA) mapping. This leads to a resource leak, which could be exploited by a local attacker to cause a Denial of Service (DoS) by exhausting available memory resources. This issue affects HiSilicon hip04 network adapters. Systems without hip04 hardware are not affected. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-772. Affected Red Hat products: Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat OpenShift Container Platform 4. Red Hat does not currently list a fixing RHSA for this CVE.
Medium [CVE-2026-68134] Add missing facility check
In the Linux kernel, the following vulnerability has been resolved: ptp: ptp_s390: Add missing facility check Only register the physical clock when facility 28 is installed and PTFF QAF returns that PTFF QPT is available. This improper registration could lead to unexpected system behavior or a denial of service (DoS) condition. Physical clock registered without checking facility 28 / PTFF availability. s390 systems without required facility only. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-280. Affected Red Hat products: Red Hat Enterprise Linux 10. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel.
Medium [CVE-2026-68130] defer destroy_previous_session until after NTLM authentication
In the Linux kernel, the following vulnerability has been resolved: ksmbd: defer destroy_previous_session() until after NTLM authentication In ntlm_authenticate(), destroy_previous_session() is called using a user pointer resolved from the client-supplied NTLM blob username field before the NTLMv2 response is validated. An authenticated attacker can set the NTLM blob username to match a victim account and set PreviousSessionId to the victim's session ID; destroy_previous_session() destroys the victim's session while ksmbd_decode_ntlmssp_auth_blob() subsequently rejects the request with -EPERM. Move destroy_previous_session() and the prev_id assignment to after ksmbd_decode_ntlmssp_auth_blob() returns success and use sess->user rather than the pre-authentication lookup result. This matches the ordering already used by krb5_authenticate(), where destroy_previous_session() is called only after ksmbd_krb5_authenticate() returns success. A flaw was found in ksmbd, a kernel module for SMB3 protocol server in the Linux kernel. An authenticated attacker can exploit a vulnerability in the NTLM (NT LAN Manager) authentication process. By manipulating specific fields in the NTLM authentication blob, an attacker can cause a victim's session to be prematurely terminated, leading to a denial of service for the affected user.
Medium [CVE-2026-68129] fix Rx queue stall on alloc failure
In the Linux kernel, the following vulnerability has been resolved: gve: fix Rx queue stall on alloc failure When the system is under extreme memory pressure, page allocations can fail during the Rx buffer refill loop. If the number of buffers posted to hardware falls below a critical low threshold and the refill loop exits due to allocation failures, the queue can stall: 1. The device drops incoming packets because there are no descriptors. 2. Since no packets are processed, no Rx completions are generated. 3. Because no completions occur, NAPI is never scheduled, preventing the refill loop from running again even after memory is freed. This results in a permanent queue stall. Resolve this by introducing a starvation recovery timer for each Rx queue. Once NAPI runs and successfully refills the queue above the threshold, the timer is not rescheduled. The threshold is set to 32 because a single maximum-sized Receive Segment Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path. Lower thresholds (such as 8 or 16) would be insufficient to process a complete maximum-sized RSC packet, risking packet drops or unexpected hardware behavior under memory pressure. Setting the threshold to 32 guarantees a safe margin to handle at least one full RSC packet.
Medium [CVE-2026-68127] reload IPv6 header after pskb_may_pull in checksum adjust
In the Linux kernel, the following vulnerability has been resolved: ila: reload IPv6 header after pskb_may_pull in checksum adjust ila_csum_adjust_transport() caches ip6h = ipv6_hdr(skb) before calling pskb_may_pull(). On a non-linear skb whose transport header sits in a page fragment, pskb_may_pull() can call __pskb_pull_tail() / pskb_expand_head() and free the old skb head, leaving ip6h dangling; the following get_csum_diff(ip6h, p) then reads freed memory. ila_update_ipv6_locator() uses ip6h (and the iaddr derived from it) again after the csum-adjust call and additionally writes the new locator through that pointer. Impact: a remote IPv6 packet routed through a configured ILA csum-adjust-transport route or receive-side mapping triggers a slab-use-after-free in ila_update_ipv6_locator() (KASAN). The route or mapping requires CAP_NET_ADMIN to configure, but trigger packets are unauthenticated once it exists. In ila_update_ipv6_locator() only the ILA_CSUM_ADJUST_TRANSPORT case pulls the skb, so reload ip6h and iaddr in that case alone before the destination-address write; the neutral-map modes never pull and keep their cached pointers. A flaw was found in the Linux kernel's Identifier-Locator Addressing (ILA) subsystem. This vulnerability, a use-after-free, occurs during the processing of IPv6 packets when an ILA checksum adjustment transport route is configured.
Medium [CVE-2026-68126] hold an interface reference across the scan worker
In the Linux kernel, the following vulnerability has been resolved: mac802154: hold an interface reference across the scan worker mac802154_scan_worker() captures the scanning sub-interface under RCU and then keeps dereferencing sdata->dev after rcu_read_unlock() and outside the rtnl -- in the failure traces, in mac802154_transmit_beacon_req() (skb->dev = sdata->dev), and in the end_scan cleanup. Nothing keeps that netdev alive across the worker iteration. A concurrent DEL_INTERFACE or PHY removal can unregister the interface once the worker drops the rtnl between its two drv_set_channel() sections. unregister_netdevice() frees the netdev asynchronously from netdev_run_todo() with the rtnl already dropped, so neither holding the rtnl nor the per-PHY IEEE802154_IS_SCANNING flag prevents a stale worker iteration from dereferencing the freed netdev -- a KASAN slab-use-after-free, reachable by racing TRIGGER_SCAN against DEL_INTERFACE (both CAP_NET_ADMIN). Pin the netdev with netdev_hold() while the RCU read lock is still held, and release it at every worker exit. A flaw was found in the Linux kernel's mac802154 component, which handles wireless communication. A local attacker with network administration privileges could exploit a timing vulnerability. By rapidly initiating and terminating network interface operations, the attacker could trigger a use-after-free error.
Medium [CVE-2026-68122] fix peer refcount leak in TCP error paths
In the Linux kernel, the following vulnerability has been resolved: ovpn: fix peer refcount leak in TCP error paths When either the TCP RX or TX error path calls ovpn_peer_hold() followed by schedule_work(&peer->tcp.defer_del_work), and the work item is already pending from the other path, schedule_work() returns false and the work runs only once. Since ovpn_tcp_peer_del_work() calls ovpn_peer_put() exactly once, the extra reference taken by the losing path is never dropped, leaking the peer object. The race window: CPU0 (strparser/RX error): CPU1 (tcp_tx_work/TX error): ovpn_peer_hold() <- refcnt+1 ovpn_peer_hold() <- refcnt+2 schedule_work() <- queued schedule_work() <- NO-OP (work already pending) ovpn_tcp_peer_del_work runs: ovpn_peer_del() ovpn_peer_put() <- refcnt+1 <- peer never freed Fix by checking the return value of schedule_work() in both paths and calling ovpn_peer_put() to drop the extra reference if the work was already pending. ovpn_peer_hold() is kept unconditional in the TX path as it cannot fail at that point. A race condition in the TCP error handling paths can lead to a reference count leak. This occurs when an internal object's reference count is incremented twice but decremented only once, preventing the object from being properly released. Over time, this resource exhaustion could lead to a Denial of Service (DoS) condition.
Medium [CVE-2026-68119] initialize standalone TCP-AO response padding
In the Linux kernel, the following vulnerability has been resolved: tcp: initialize standalone TCP-AO response padding tcp_v4_send_ack() and tcp_v6_send_response() construct standalone TCP responses with TCP-AO options. The option length carries the actual MAC length, but the TCP header length includes the option rounded up to a four-byte boundary. tcp_ao_hash_hdr() writes the MAC only. Thus, when the MAC length is not four-byte aligned, the one to three bytes after the MAC are left uninitialized and may be transmitted. For the normal TCP-AO hashing mode, those bytes also have to be initialized before computing the MAC. Initialize only the alignment padding in the TCP-AO branches, before hashing the header. Use TCPOPT_NOP, as in the normal TCP-AO output path. This avoids adding work to non-AO TCP responses while preserving a valid authenticated header. A flaw was found in the Linux kernel's TCP Authentication Option (TCP-AO) implementation. When the kernel constructs standalone TCP responses with TCP-AO options, padding bytes in the TCP header may be left uninitialized. This can lead to the disclosure of sensitive information to a remote attacker. Standalone ACK/response construction leaves TCP-AO padding uninitialized. Systems not using TCP-AO are not affected. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-908.
Medium [CVE-2026-68115] replace BUG_ON with WARN_ON
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx10: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit ac6f00beb658239bced4aaed9efbb04a35348d48) Under certain unexpected conditions, the kernel could crash, leading to a system-wide Denial of Service (DoS). This issue has been resolved by preventing the kernel from crashing in these scenarios. This issue affects AMDGPU GFX10 hardware. Certain error paths used BUG_ON(), causing kernel panic. A local user exercising those GPU paths could trigger denial of service. Systems without AMD GPUs are not affected. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-617. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat OpenShift Container Platform 4. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-68114] replace BUG_ON with WARN_ON
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx12.1: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit e4d99e04b2e9b13b97d3b17804c735f62689db23) Under certain error conditions, the system could encounter a critical error that would cause the kernel to crash. This issue could lead to a Denial of Service (DoS), making the system unavailable. The vulnerability has been resolved by changing the error handling to prevent system crashes. This issue affects AMDGPU GFX12.1 hardware. BUG_ON() on error paths forces kernel panic. Systems without AMD GPUs are not affected. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-617. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat Enterprise Linux for NVIDIA 26; Red Hat OpenShift Container Platform 4. Will not fix / out of support: Red Hat Enterprise Linux 6; Red Hat Enterprise Linux for NVIDIA 26. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-68113] replace BUG_ON with WARN_ON
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx12: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit f952076f76d62f783e8ba4995a7c400d39354ccf) This vulnerability allowed a local attacker to trigger a kernel crash due to an improper use of the `BUG_ON()` macro, which is designed to halt the system on critical errors. By replacing `BUG_ON()` with `WARN_ON()`, the kernel no longer crashes, mitigating a potential Denial of Service (DoS) condition. BUG_ON() on error paths forces kernel panic. Systems without AMD GPUs are not affected. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-617. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat Enterprise Linux for NVIDIA 26; Red Hat OpenShift Container Platform 4. Will not fix / out of support: Red Hat Enterprise Linux 6; Red Hat Enterprise Linux for NVIDIA 26. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-68112] replace BUG_ON with WARN_ON
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx9.4.3: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit 5676593d08998d7a6d9e2d51d6b54b3820e3755c) This vulnerability is due to the use of `BUG_ON()` macros in error handling, which, when triggered by specific error conditions, could cause the kernel to crash. This could result in a Denial of Service (DoS) for the system. This issue affects AMDGPU GFX9.4.3 hardware. Certain error paths used BUG_ON(), causing kernel panic. Systems without AMD GPUs are not affected. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-617. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat OpenShift Container Platform 4. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-68111] replace BUG_ON with WARN_ON
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx9: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit b71604f8685b0eba07866f4e8dc30f93e1931054) A flaw was found in the Linux kernel's amdgpu graphics driver. This vulnerability could lead to a system crash due to an unhandled error condition. By replacing a critical error mechanism with a warning, the kernel is now more resilient, preventing potential Denial of Service (DoS) situations. BUG_ON() on error paths forces kernel panic. Systems without AMD GPUs are not affected. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-617. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat OpenShift Container Platform 4. Will not fix / out of support: Red Hat Enterprise Linux 6. Red Hat does not currently list a fixing RHSA for this CVE. Affected products named by the advisory: Red Hat package: kernel-rt.
Medium [CVE-2026-68110] replace BUG_ON with WARN_ON
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/sdma4.4.2: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit fa4f86a148271e325e95287630a3a15a9cd35fdc) A flaw was found in the Linux kernel's `amdgpu` graphics driver, specifically within the `sdma4.4.2` component. This vulnerability could allow a local attacker to trigger a system crash by exploiting certain unhandled error conditions. The issue stems from the use of a `BUG_ON()` macro, which forces a kernel panic and results in a Denial of Service (DoS). The resolution replaces this with a `WARN_ON()` macro, preventing the system from crashing while still logging the error. This issue affects systems using the AMDGPU driver with SDMA 4.4.2. Certain error paths in the SDMA engine used BUG_ON(), which forces an immediate kernel panic. A local user able to exercise those GPU paths could trigger a denial of service. Systems without AMD GPUs are not affected. Red Hat severity: Low — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-617. Affected Red Hat products: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; Red Hat Enterprise Linux 9; Red Hat OpenShift Container Platform 4. Will not fix / out of support: Red Hat Enterprise Linux 6.
Medium [CVE-2026-68106] fix division by zero with invalid uvd dimensions
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix division by zero with invalid uvd dimensions When width or height is less than 16, width_in_mb or height_in_mb becomes 0, leading to fs_in_mb being 0. This causes a division by zero when calculating num_dpb_buffer in H264 and H264 Perf decode paths. Add validation to reject frames with width < 16 or height < 16 before performing any calculations that depend on these values. V2: Format change - move up all vaiable definitions. V3: Use warn_once to avoid spam. (cherry picked from commit 3e41d26c70b0a459d041cc19482a226c4b7423cb) This vulnerability occurs when processing video frames with invalid dimensions, specifically if the width or height is less than 16. Such malformed input can lead to a division by zero error during video decoding operations. A local attacker could exploit this to cause a system crash, resulting in a Denial of Service (DoS). This issue affects AMDGPU UVD video decode. Invalid frame dimensions below 16 cause division by zero in macroblock calculations. Systems without AMD GPUs are not affected. Red Hat severity: Moderate — CVSS 5.5 (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). Weakness: CWE-369. Affected products named by the advisory: Red Hat Enterprise Linux 10; Red Hat Enterprise Linux 6; Red Hat Enterprise Linux 7; Red Hat Enterprise Linux 8; and 3 more.